Canon imageRUNNER ADVANCE C9075S PRO Manuale utente
-
Océ
PRISMAsync
Intuitive operation.
Perfect-fit production.
User manual
Safety
information
Copyright
© 2011 Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted
in any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness for any particular purpose.
Further, Océ reserves the right to revise this publication and to make changes from time
to time in the content hereof without obligation to notify any person of such revision or
changes.
Edition: 2011-07
Contents
Chapter 1
Instructions for safe use.....................................................................................5
Instructions for safe use............................................................................6
Chapter 2
Regulation notices............................................................................................11
Regulation notices....................................................................................12
Chapter 3
General information.........................................................................................17
Caution labels and notations...................................................................18
3
Contents
4
Contents
Chapter 1
Instructions for safe use
Instructions for safe use
Introduction
All products have been tested in accordance with the strictest international safety standards.
Please read the following sections before you connect the machine to the power supply.
These sections contain important information with regard to the user safety and the
prevention of equipment problems. Make sure that you observe the safety rules hereinafter.
This helps to assure safe operation of the product. Make sure that you observe all the
precautions mentioned below.
Note:
Depending on the context, the terms: system, machine, and equipment all will be used
to designate the product for which user documentation is applicable.
Note:
Some parts of the contents of this section may not be applicable to your product.
Note:
Please refer to the corresponding Material Safety Data Sheets for specific safety
information. You can download the Material Safety Data Sheets from the support site
of your product.
Warning and Caution Symbols
Warning:
Ignoring this warning could cause serious injury or even death.
Caution:
Ignoring this warning could cause injury or damage to property.
Note:
Indicates additional important information.
The indicators above are used on the warning labels or in the manuals to categorize the
level of safety warnings.
Chapter 1 - Instructions for safe use6
Instructions for safe use
Disassemble and modification
Warning
•Do not remove covers and panels which are fixed to the machine. Some machines
have a high-voltage component or a laser beam source inside that could cause electrical
shock or blindness
•Do not modify this machine, because this could cause a fire, electrical shock or
breakdown. If the machine contains a laser, the laser beam source could cause blindness.
Caution
•Do not place any liquids on the machine.
•To avoid any risk, only properly qualified and authorized service technicians are allowed
to modify the machine.
•Do not bridge any mechanical or electrical circuit breakers.
Power cord
Warning
•Do not scratch, wrap, heat, twist, bend, place a heavy object on or cause any other
damage to the power cord. The use of a damaged power cord (exposed core wire,
broken wire, for example) could result in a fire or breakdown. If you find any of these
conditions, immediately turn OFF the power switch and unplug the power cord from
the power outlet. Then call your authorized service representative.
•Only use the mains connector cable that was supplied with the machine.
Power source
Warning
•Put the power plug directly into a wall socket that has the same configuration as the
plug. The use of an adapter leads can result in an inadequate power supply. If a proper
wall outlet is not available, ask a qualified electrician to carry out the installation.
•Do not connect the machine to a mains voltage that differs from the value as stated
on the power marking label.
•Do not use a multiple outlet adapter or an extension lead. Contact your authorized
service representative if an extension lead is required.
Note
•If connection to a different mains voltage is required, contact your authorized service
representative.
Power plug
Warning
•For machines that are connected via a wall socket: Place the machine close to a wall
socket that is easily accessible. The power plug is intended to serve as a disconnect
device.
Chapter 1 - Instructions for safe use 7
Instructions for safe use
Grounding
Warning
•Connect the power cord to an electrical outlet (wall socket) that is equipped with a
grounding terminal.
•This equipment was not designed for connection to an IT power system. An IT power
system is a voltage network in which the neutral wire is not grounded.
Installation
Warning
•Make sure that the machine is placed on a level, horizontal surface of sufficient strength.
•Do not place this machine on an unstable or tilted bench.
•Do not place this machine in a location that is subject to lots of vibrations and shocks.
•Do not use flammable sprays, liquids or gases near this product, because this could
cause a fire.
Note
•It is recommended that you connect only copy-control products (or other products)
which meet the (inter)national product safety and radio frequency interference
standards. Only use an attachment cable as specified by the manufacturer.
Ventilation
Caution
•Do not block the machine's ventilation openings.
•Do not place the machine in rooms which are too small and insufficiently ventilated.
•Be sure to allow a clearance of 60 mm or more at the back of this machine for the
ventilation duct.
Actions in response to troubles
Warning
•When a piece of metal, water or any other similar foreign matter gets inside the
machine, immediately turn OFF the power switch and unplug the power cord from
the power outlet. Then call your authorized service representative.
•Immediately stop using the machine if the machine becomes excessively hot, emits
smoke, or produces unusual odors or noises. Immediately turn OFF the power switch
and unplug the power cord from the power outlet. Then call your authorized service
representative.
Caution
•Stop using the machine if the machine was dropped or a cover was damaged.
Immediately turn OFF the power switch and unplug the power cord from the power
outlet. Then call your authorized service representative.
Chapter 1 - Instructions for safe use8
Instructions for safe use
•LCD display. Do not rub, press or touch the display surface with hard material, because
the polarizer at the surface can be easily scratched. The LCD module consists of glass.
Therefore, the LCD module can damage when you drop, pinch strongly or punch
the module. If glass breaks, be careful that you do not get injured by the glass fragments.
Contact your authorized service representative.
Moving the machine
Caution
•Make sure that you disconnect the power cord and other cables before you move the
machine.
•Make sure that you check the documentation for the space requirements before you
move the machine.
Vacation
Caution
•Unplug the machine when you will not use the machine for a long period of time.
Chapter 1 - Instructions for safe use 9
Instructions for safe use
Chapter 1 - Instructions for safe use10
Instructions for safe use
Altri manuali per imageRUNNER ADVANCE C9075S PRO
4
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Canon Controllori
Canon
Canon imagePRESS C800 Series Manuale operativo
Canon
Canon imagePASS-B2 Manuale operativo e di manutenzione
Canon
Canon RC-IP100 Manuale utente
Canon
Canon Digital Video Software v.32 Manuale operativo
Canon
Canon CR-G100 Manuale utente
Canon
Canon imagePASS-P2 Manuale utente
Canon
Canon ColorPASS-GX400 Manuale operativo e di manutenzione
