Canon CANON EOS 1100D Manuale utente

m mt

mm.1

mau_

Printing images

Printing (p.202)

You can connect the camera directly to a printer and print

out the images in the card. The camera is compatible with

"y'#'PictBridge" which is the standard for direct printing.

Digital Print Order Format (DPOF) (p.211)

DPOF (Digital Print Order Format) enables you to print

images recorded in the card according to your printing

instructions such as the image selection, quantity to print,

etc. You can print multiple images in one batch or give the

print order to a photofinisher.

Preparing to Print

The direct printing procedure is done entirely with the camera

while you look at the LCD monitor.

Set the camera's power switch to

<OFF>.

Set up the printer.

For details, see the printer's

instruction manual.

Connecting the camera to the

printer.

Use the interface cable provided with

the camera.

Connect the cable to the camera's

<_> terminal with the cable plug's

<_ > icon facing the front of the

camera.

To connect to the printer, refer to the

printer's instruction manual.

Turn on the printer.

_iSetthecamera'spowerswitchto

<ON>.

Some printers may make a beeping

sound.

202

Preparing to Print

i!iii

_PictBridge PI.yb.o.t.oi .go.

Press the <l-gq> button.

The image will appear, and the <#_'>

icon wiii appear on the upper left to

indicate that the camera is connected

to a printer.

Movies cannot be printed.

The camera cannot be used with printers compatible only with CP Direct

or Bubble Jet Direct.

Do not use any interface cable other than the one provided.

If there is a long beeping sound in step 5, it indicates a problem with the

printer. Resolve the problem displayed by the error message (p.210).

You can also print RAW images taken with this camera.

If you use a battery pack to power the camera, make sure it is fully

charged. With a fully-charged battery, printing up to about 4 hr. 30 rain. is

possible.

Before disconnecting the cable, first turn off the camera and printer. Hold

the plug (not the cord) to pull out the cable.

For direct printing, using AC Adapter Kit ACK-E 10 (sold separately) to

power the camera is recommended.

203

The screen display and setting options will differ depending on the

printer. Some settings might not be available. For details, see the

printer's instruction manual.

Printer-connected icon Select the image to be printed.

Check that the <_#'> icon is

displayed on the upper left of the LCD

monitor.

Press the <4_ > key to select the

image to be printed.

P,e,,<e>-

The print setting screen wiii appear.

Print setting screen Sets the printing effects (p.206).

Sets the date or file number imprinting to on

or off.

the quantity to be printed.

the trimming (cropping) (p.209).

the paper size, type, and layout.

Returns to the screen in step 1.

the printing.

The paper size, type, and layout you have set are displayed.

* Depending on the printer, certain settings such as the date and file

number imprinting and trimming might not be semectabie.

}:; selectreapersettingsl.

Select [Paper settings], then press

< _'_ >.

The paper settings screen will

appear.

204

f'_( Printing

Select the size of the paper loaded in

the printer, then press <_-_>.

The paper type screen wi[[ appear.

Select the type of the paper loaded in

the printer, then press <_-_>.

When using a Canonprinter andCanon

paper,read the printer'sinstruction manual

to check what papertypes can be used.

The page layout screen wH[appear.

Select the page layout, then press

The print setting screen wH[ reappear.

Bordered The print will have white borders along the edges.

Borderless The print wilt have no borders. If your printer cannot print

borderless prints, the print will have borders.

The shooting information* wilt be imprinted on the border on

BorderedR 9x13cm and larger prints.

×x-up Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.

20-up n Twentyor35 imageswill be printedasthumbnailson A4or Lettersize paper.1.

35-upQ - [2O-upH] wilt have the shooting information* imprinted.

Default The page layout will vary depending on the printer model or its settings.

"1: After ordering the prints with "Digital Print Order Format (DPOF)" (p.211), you should

print by following "Direct Printing with DPOF" (p.214).

*2: From the Exif data, the camera name, lens name, shooting mode, shutter speed,

aperture, exposure compensation amount, ISO speed, white balance, etc., will be

imprinted.

2O5

f'_ Printing

Set the printing effects.

Set as necessary. If you need not set

any printing effects, go to step 5.

What is displayed on the screen

differs depending on the printer,

Select the option on the upper right

(circled in the screenshot), then press

< _'_ >,

Select the desired printing effect, then

press < _-_ >.

If the < B> icon is displayed brightly

next to < _'t_1 >, you can also adjust

the printing effect (p.208).

Printing Effect Description

The image will be printed according to the printer's standard

_On colors. The image's Exif data is used to make automatic

corrections.

_Off No automatic correction wilt be applied.

_VlVID The image wilt be printed with higher saturation to produce

more vivid blues and greens.

NR Image noise is reduced before printing.

B/W B/W Prints in black-and-white with true blacks.

B/W Cool tone Prints in black-and-white with cool, bluish blacks.

B/W Warm tone Prints in black-and-white with warm, yellowish blacks.

I_ Natural Prints the image in the actual colors and contrast. No

automatic color adjustments are applied.

The printing characteristics are the same as the "Natural"

I_ Natural M setting. However, this setting enables finer printing

adjustments than with "Natural."

Default The printing wilt differ depending on the printer. For details,

see the printer's instruction manual.

When you change the printing effects, it is reflected in the image displayed on

the upper left. Note that the printed image might look slightly different from the

displayed image which is only an approximation. This also applies to

[Brightness] and [Adjust levels] on page 208.

206

f'_( Printing

¸¸2111¸

Set the date and file number

imprinting.

Set as necessary.

Select <@>, then press <8>.

Set as desired, then press < 8>.

Set the number of copies.

Set as necessary.

Select <@>, then press <8>.

Set the number of copies, then press

< _'_ >.

;i_:' Start printing.

Select [Print], then press <_ >.

With Easy printing, you can print another image using the same settings.

Just select the image and press the <r_ > button. With Easy printing, the

number of copies will always be 1. (You cannot set the number of

copies.) Also, any trimming (p.209) will not be applied.

, The [DefauJt] setting for printing effects and other options are the

printer's own default settings as set by the printer's manufacturer. See

the printer's instruction manual to find out what the [Default] settings are.

, Depending on the image's file size and image-recording quality, it may

take some time for the printing to start after you select [Print].

If image tilt correction (p.209) has been applied, it may take longer to

print the image.

To stop the printing, press <_)> while [Stop] is displayed, then select [OK].

If you execute [Cmear all camera settings] (p.164), all the settings wilt

revert to the default.

2O7

f'd(Printing

In step 4 on page 206, select the printing

effect. When the <B> icon is displayed

brightly next to <I'i_PJl>, you can press

the <DISP.> button to adjust the printing

effect. What can be adjusted or what is

displayed will depend on the selection

made in step 4.

Brightness

The image brightness can be adjusted.

Adjust levels

When you select [Manual], you can change

the histogram's distribution and adjust the

image's brightness and contrast.

With the Adjust levels screen displayed, press

the <DISP.> button to change the position of

the <|>. Press the <4_> key to freely adjust

the shadow level (0 - 127) or highlight level

(128- 255).

_.t:Brightener

Effective in backlit conditions which can make the subject's face look

dark. When [On] is set, the face will be brightened for printing.

Red-eye corro

Effective in flash images where the subject has red eye. When [On]

is set, the red eye will be corrected for printing.

The [_ Brightener] and [Red-eye corr.] effects will not show on the screen.

, When you select [Detail set.], you can adjust the [Contrast],

[Saturation], [Color tone], and [Color balance]. To adjust the [Color

balance], use the <_,> keys. B is for blue, A is amber, M is magenta,

and G is green. The color in the respective direction will be corrected.

, If you select [Clear all], all the printing effect settings wilt be reverted to

the default.

2O8

f'_( Printing

Tilt correction You can crop the image and print only

the trimmed portion as if the image was

recomposed. Do the trimming right

before printing. If you set the trimming

and then set the print settings, you may

have to set the trimming again.

On the print setting screen, select [Trimming].

Set the trimming frame size, position, and aspect ratio.

The image area within the trimming frame will be printed. The

trimming frame's aspect ratio can be changed with [Paper settings].

Changing the trimming frame size

When you press the < _ > or < [].(_ > button, the size of the

trimming frame will change. The smaller the trimming frame, the

larger the image magnification will be for printing.

Moving the trimming frame

Pressthe <,;_ > keyto move theframe over the imagevertically or

horizontally.Move the trimmingframe until itcovers the desired imagearea.

Rotating the frame

Pressing the <DISR> button will toggle the trimming frame

between the vertical and horizontal orientations. This enables you

to create a verticaPoriented print from a horizontal image.

Image tilt correction

By turning the <_ > dial, you can adjust the image tilt angle up to

_+10degrees in O.5-degree increments. When you adjust the

image tilt, the <(__.> icon on the screen will turn blue.

Press <Q> to exit the trimming.

The print setting screen will reappear.

® You can check the trimmed image area on the upper left of the

print setting screen.

209

Altri manuali per CANON EOS 1100D

Questo manuale è adatto per i seguenti modelli

Altri manuali Canon Macchina fotografica digitale

Canon

Canon CR-N500 Manuale utente

Canon

Canon PowerShot ELPH 115 IS Manuale utente

Canon

Canon Eos 3000N Date Manuale utente

Canon

Canon EOS 7D Mark II (G) Manuale utente

Canon

Canon CDI-E075-010 Manuale utente

Canon

Canon EOS 6D Manuale utente

Canon

Canon EOS 7D Mark II (G) Manuale utente

Canon

Canon EOS M5 Manuale utente

Canon

Canon PowerShot S50 Manuale di istruzioni

Canon

Canon EOS 5D MARK IV Manuale utente

Canon

Canon IXUS i Manuale utente

Canon

Canon PowerShot SX110 IS Manuale utente

Canon

Canon IXUS90IS Manuale utente

Canon

Canon VI-T Manuale utente

Canon

Canon Digital IXUS 200 IS Manuale utente

Canon

Canon PowerShot SX160 IS Manuale utente

Canon

Canon PowerShot S30 Manuale di istruzioni

Canon

Canon EOS 7D Mark II (G) Manuale utente

Canon

Canon PowerShot G9 Manuale utente

Canon

Canon EOS-1 D X Mark II G Manuale utente

Canon

Canon EOS REBEL T2I Manuale utente

Canon

Canon PowerShot SX130 IS Manuale per l'uso e la cura

Canon

Canon PowerShot A3500 IS Manuale utente

Canon

Canon EOS REBEL T2I Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Nikon

Nikon Coolpix 100 Manuale utente