Canon VB-H47 Manuale utente

Installation Guide

18 (0.71)

Φ132 (5.20)

R55 (R2.17)

161(6.34)

90°

10°

155 (6.10)

47 (1.85)

15 (0.59)

4-M3

48 (1.89) 112.5 (4.43)

Unit: mm (in.)

Please be sure to read the “Safety Precautions”section for correct use.

Caution

Request a professional installer for all installation work. Never try to install

the camera yourself. Doing so may result in unforeseen accidents such as

dropping the camera or electric shock.

Some cameras are not available in certain countries or regions.

Network Camera

Introduction

Included Items

Camera Power connector

Printed Materials

User Manuals

■Types of User Manuals

The following describes the different camera user manuals.

Installation Guide (this document)

This describes precautions and procedures for installing the camera.

Operation Guide

This explains the camera initial settings, camera viewer operations, settings on the Settings

page, and troubleshooting, etc.

Specifications

This lists the camera specifications.

■Notes

Any unauthorized reproduction of this document is prohibited.

The contents of this document are subject to change without any prior notice.

This document has been prepared with the utmost attention to accuracy. If you have any

comments, however, please contact a Canon sales representative.

Canon shall assume no liability for any outcome of using this product, notwithstanding

items listed above.

■Symbols Indicating Camera Models

Explanations that differ depending on the camera model are indicated by the camera

name and the following symbols.

H47

: VB-H47

M46

: VB-M46

Trademarks

• SD, SDHC, and SDXC logos are trademarks of SD-3 C, LLC.

• All other company or product names used in this document are trademarks or registered

trademarks of their respective holders.

Part Names

1 2

34 5 6

Audio input terminal (common LINE IN and MIC IN) (P.15)

2. Audio output terminal (LINE OUT) (P.15)

3. 100Base-TX LAN connector (P.11) 4. Power connection terminal (P.12)

5. Reset Switch*1 6. External Device I/O Terminals (P.13)

7. Fixing screw hole for tripod 8. Label*2

9. Safety wire attachment 10. LED (Blue)*3

11. Memory card cover 12. Lens

13. Camera head 14. Rating label

*1 : Please refer to the “Operation Guide” for the method to reset the camera.

*2 : It is recommended to write down the serial number and MAC address before installing the

camera.

*3 : LED

LED Status

On When powered on, during reboot, during normal use (when set to“ON”*)

Blinking Updating the firmware, or initializing settings

Off Lights up for a few seconds at startup, then turns off (when set to “OFF”*)

*Refer to“Operation Guide”

Before Installing the Camera

When Using a Memory Card

Insert a memory card before installing the camera.

Installing the Camera

A ceiling mount cover or indoor dome housing is necessary to install the camera on a

ceiling. The installation method using the ceiling mount cover is explained here.

43 x 84 mm (1.69 x 3.31 in)

Use the template to make mounting screw holes and wiring holes in the ceiling.

The template is included in the ceiling mount cover (sold separately).

M3 x 4

Attach the ceiling bracket to the camera.

Ceiling bracket and screws are included in the ceiling mount cover (sold separately).

Installing the Camera





Install the safety wire (0.7 m)(27.56 in.).

After firmly attaching the wire to the anchor or structure, secure it to the camera.

Safety wires are included in the ceiling mount cover (optional).

The screws (nominal diameter: M3, length: 6 mm (0.24 in.), head shape: bind) are to be

fastened to the camera.

Installing the Camera

Fix the camera, which has the ceiling bracket is attached, to the ceiling.

Be sure to separately prepare mounting screws, according to the installation location and

material.

(Nominal diameter: M4, Head Shape: pan, x 4)

Installing the Camera

Connect the cables that are passed through the wiring holes to the camera.

For power supply, refer to“Power Supply” (P. 11).

For network terminal, refer to “Interface”(P. 18).

Cutout section

Install the ceiling mount cover.

Align the ( ) mark on the ceiling mount cover with the ( I ) mark on the back of the

camera, and turn it clockwise to the position of the ( I ) mark to mount it.

If the cables cannot be stored above a ceiling made of concrete, etc., or if the cables do

not fit within the ceiling mount cover, bend the cutout section of the ceiling mount cover

using diagonal pliers, etc., to create a cutout through which to guide the cables.

Installing the Camera

External dimensions of the ceiling mount cover (sold separately).

14- 4.5 ( 0.18)

4- 3.4 ( 0.13)

4- 4.5 ( 0.18)

4- 3.4 ( 0.13)

180 (7.09) 66

(2.60)

(1.77)

22 (0.87)

160 (6.30)

140 (5.51)

116 (4.57)

(0.79)

144 (5.67)

(2.56)

83.5 (3-9/32)

85.7 (3-3/8)

83.5 (3-9/32)

46 (1-13/16)

Junction box plate

Ceiling bracket Unit: mm (in.)

Installing the Camera

When Using the Junction Box

Use the mounting bracket of the junction box included in the ceiling mount cover (sold

separately).

M3 x 4

Install the junction box plate on the junction box. Prepare the screws separately by

referring to the instruction manual of the junction box and the external dimensions of

the junction box plate (P.9).

Install the ceiling bracket to the camera. The screws are included in the ceiling mount

cover (sold separately).

Fix the camera, which has the ceiling bracket attached, to the junction box. The screws

are included in the ceiling mount cover (sold separately).

Install the ceiling mount cover (P.8).

Altri manuali per VB-H47

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente