Canon VB-S32D Manuale utente

Please be sure to read the “Safety Precautions”section for correct use.

Caution

Request a professional installer for all installation work. Never try to install

the camera yourself. Doing so may result in unforeseen accidents such as

dropping the camera or electric shock.

Some cameras are not available in certain countries or regions.

43.2 (1.70)

54.5 (2.15)

21.0 (0.83)

9.5 (0.37)

Φ4.8 (Φ0.19)

2-4.6 (0.18)

2-5.4 (0.21)

53.3 (2.10) 49.8 (1.96)

11.0 (0.43)

54 (2.13)

R23 (R0.91)

Φ120 (Φ4.72)

Network Camera

Unit: mm (in.)

Installation Guide

Introduction

Included Items

Camera Safety Wire, Screw (M4) x 1

Template Printed Materials

User Manuals

■Types of User Manuals

The following describes the different camera user manuals.

Installation Guide (this document)

This describes precautions and procedures for installing the camera.

Operation Guide

This explains the camera initial settings, camera viewer operations, settings on the Settings

page, and troubleshooting, etc.

Specifications

This lists the camera specifications.

■Notes

Any unauthorized reproduction of this document is prohibited.

The contents of this document are subject to change without any prior notice.

This document has been prepared with the utmost attention to accuracy. If you have any

comments, however, please contact a Canon sales representative.

Canon shall assume no liability for any outcome of using this product, notwithstanding

items listed above.

■Symbols Indicating Camera Models

Explanations that differ depending on the camera model are indicated by the camera

name and the following symbols.

S32

: VB-S32D

S820

: VB-S820D

Trademarks

• microSD, microSDHC, and microSDXC logos are trademarks of SD-3 C, LLC.

• All other company or product names used in this document are trademarks or registered

trademarks of their respective holders.

Part Names

S820

1112

1. Camera head 2. Top cover

3. Memory card cover 4. Rotation dial

S820

5. Rating label 6. Tripod mounting screw hole*1

7. Audio input terminal 8. External device I/O terminals

9. 100 Base-TX LAN connector 10. Safety wire mounting section

11. Label*2 12. LED

* 1: A 1/4-20 UNC tripod mounting screw less than 5.5 mm (0.22 in.) in length will fit the screw hole.

* 2: It is recommended to write down the serial number and MAC address.

Before Installing the Camera

When Using a Memory Card

Insert a memory card before installing the camera.









Memory Card Slot

Reset switch (see “Operation Guide”)

To remove the memory card, push it in all the way until the card slightly pops out and

remove.

In this document, memory cards that can be used with the camera is referred to as “memory

card”.

Installing the Camera

S820 Wall installation

Template

FRONT

S820

Φ 30 mm

(1.18 in.)

Wall installation

Installing the Camera

Safety Wire

Anchor or structure

M4 x (1)

Installing the Camera

LED

LAN cable

For power supply, refer to “Power Supply” (P. 12) .

For network terminal, refer to “Interface”(P. 16)

LED

LED Status

On When power supply is on, restarted, or in normal use

(when set to “ON”*)

Blinking Updating the firmware, or initializing settings

Off Lights up for a few seconds at startup, then turns off

(when set to “OFF”*)

* Refer to“Operation Guide”

Important

S32

• The camera head will move and make noise when the power is turned on.

• Do not touch the camera head.

• After the head stops moving, mount the camera.

Installing the Camera

If using the External Device Terminal or Audio Terminal

Protective cover for audio

input terminal

Audio input terminal

Protective cover for external

device I/O terminal

External device I/O terminal

Refer to “Audio Input Terminals Common for LINE IN/MIC IN” (P. 14) for details.

Installing the Camera





S32







Be sure to prepare mounting screws separately.

(Nominal diameter: M4, Head Shape: pan, x 3)

Installing the Camera







S32

S820

Important

S820

• Ghosts may appear on the screen depending on the external light angle of

incidence. Perform fine adjustment of the camera orientation.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente