Canon creative park Manuale utente
View of completed model
Front Right side
Left sideBack
PAGE01
Drum set : Assembly Instructions
Parts sheet (Pattern) :Twenty-two A4 sheets (No.1~No.22)
No.of Parts :384
Assembly Instructions :Ten A4 sheets (No.1~No.10)
*Build the model by carefully reading the Assembly Instructions,in the parts sheet page order.
*Assembly will be easier if you write the part's number on the back of each part.
A drum set is a collection of various types of drums, cymbals and other percussion instruments that are
lined up in a formation that makes them easily played by one person. The number and type of
instruments included can be arranged according to the performer's preference or characteristics of the
music. The performer usually plays seated on a stool. The idea for the drum set is said to have
originated in military bands, when a cymbal was placed on top of the bass drum to make it easier for
the performer holding it. This was followed by the idea to use a pedal to play the bass drum with the
foot, and the invention of the hi-hat, two cymbals on top of each other that are clashed together. These
adaptations have resulted in the drum set up and beat style we know today.
Trace along the folds with a ruler and a used pen (no ink) to
get a sharper, easier fold.
Handy Hint
Mountain fold (dotted line)
Make a mountain fold.
Glue, scissors and other tools
may be dangerous to young
children so be sure to keep them
out of the reach of young
children.
Scissors, set square, glue (We
recommend stick glue),pencil,
used ballpoint pen, toothpicks,
tweezers,
(useful for handling small parts)
Assembly tip CautionAssembly Instructions Tools and materials
Valley fold
(dashed and dotted line)
Make a valley fold.
Scissors line (solid line)
Cut along the line.
Cut In line (orange solid line)
Cut a slot.
Cut out (orange shaded)
Cut out the area marked.
The glue spot(colored dot)
shows where to apply the glue.
Glue spot (Red dot)
Glue parts with the same number together.
Glue spot (Green dot)
Glue within the same part.
Glue spot (Blue dot)
Glue to the rear of the other part.
Glue spot (Yellow dot)
Apply glue to the back, and attach to the back of the other parts.
Before gluing, crease the paper
along mountain fold and
valley fold lines and make sure
rounded sections are nice and
stiff.
PAGE02
Drum set : Assembly Instructions
Wrapping the piece around a can or other
cylindrical object will result in a neater finish.
Handy Hint:
PAGE02
PAGE03
Bass drum
Front side
Front side
Back side
Back side
*NB: Begin from the opposite side
to the seam.
Upper part
Front side
Front side
Back side
Back side
Align the marker lines on 3A
and 3B with the glue spots on
3C ~ 3H, and attach.
*Align the reverse sides and attach.
*NB: Align the thick marker line
with the upper part, and insert
it through to the front side.
Do not apply glue.
*Attach to the display stand later.
Before starting.
Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet
No.1~No.22).Work in order of these sheet numbers.(The parts for assembly are on pages 2 ~ 22.)
There are 384 parts in total,and each part is numbered according to its page.
Also,the glue spots on each part are marked with the number of the part to attach to them.
The numbers ~ in the Assembly Instructions indicate the order to attach parts.Follow
this order when attaching.
When one part has multiple spots to attach,or glue spots for attaching other pieces,colors
( ) and numbers are used to show the precise location and method for attaching.
Check the diagrams in the "Assembly Instructions" carefully for each part as you work.
Diagonal line
Seam
Bass drum
Lower part
Upper part
Upper part
*Take note of where
the thick marker line is.
PAGE03
Drum set : Assembly Instructions
*Take note of where
the thick marker line is.
Upper part
Lower part
*Align the reverse sides and attach.
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
Inside
*Attach the back.
Wrapping the piece around
a thin cylindrical object will
result in a neater finish.
Align the seam lines and
insert the pieces inside
each other, and attach to
the specified position.
Assemble both the left
and right parts so that
their seams face outwards.
Face the seam line
inwards and insert the
piece to the position specified.
PAGE04 PAGE05
PAGE06
*Roll up and attach.
*Roll up and attach.
*Do not attach the
area marked with
the diagonal lines.
*After attaching, swivel the
pieces around as shown,
so that the seams face inwards.
*Attach the parts circled in blue
around the tom holder pipes so
that the pipes are held up vertically.
Seam line
Tom holder pipe
Tom-tom 13" x 10"
Bass drum Bass drum
Align the marker lines on 6A
and 6B with the glue spots on
6C ~ 6H, and attach.
PAGE04
Drum set : Assembly Instructions
PAGE06
*Before attaching parts 6O and 6P, bend them into shape as shown in the diagram.
*Begin from the opposite side to the seam. *Begin from the opposite
side to the seam.
PAGE07
*NB: Align the thick marker line
with the specified position
on the upper part, and insert
it through. Do not apply glue.
*NB: There are 12 6Q parts altogether.
One of them, marked 6Q-1, has a
specific location for attaching.
Take note of the markings
*Before attaching parts 7P and 7Q, bend them into shape as shown in the diagram.
*Take note of where
the thick marker line is.
*Align the reverse sides and attach.
*NB: Align the thick
marker line with
the specified position
on the upper part, and
insert it through.
Do not apply glue.
Tom-tom 13" x 10"
Upper part
Lower part
Seam
Lower part
Upper part
*Do not apply glue to .
Tom-tom 12" x 9"
Upper part
Lower part
Align the marker lines on 7A
and 7B with the glue spots on
7C ~ 7H, and attach.
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
Seam
Upper part
Lower part
Lower part
Upper part *Do not apply glue to .
Take note of
the markings
*NB:
There are 12 7R parts altogether.
One of them, marked 7R-1, has a
specific location for attaching.
Specified position
Specified position
PAGE05
Drum set : Assembly Instructions
PAGE02 03 04 05 06 07
Bass drum / Tom-tom 13" x 10" / Tom-tom 12" x 9"
PAGE08
Floor tom
PAGE09
*NB: There are 16 8H parts altogether.
Head
Bass drum front head
Shell
Bass drum bar
Tom holder
Bass drum hook
Lug
Bass drum
Tom-tom 13" x 10" Tom-tom 12" x 9"
Lug
*Begin from the opposite
side to the seam.
Lower part
*Align the reverse
sides and attach.
*Take note of where the thick marker line is.
*Take note of where
the thick marker line is.
*Before attaching parts 8F and 8G, bend them into shape as shown in the diagram.
Floor tom
Upper part
Lower part
Seam
Upper part
Lower part
*Do not apply glue to . *NB:
Align the thick marker line
with the specified position
on the upper part, and insert
it through. Do not apply glue.
Align the marker lines on 9A
and 9B with the glue spots on
9C ~ 9H, and attach.
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
Specified position
PAGE06
Drum set : Assembly Instructions
PAGE09
Floor tom
PAGE10
Snare drum
PAGE11
Leg
Rubber foot
Upper part
Lower part
Lower part Upper part
Align the snare wire position and fit the head on.
Do not apply glue.
*Align the reverse sides and attach.
*Align the reverse
sides and attach.
*After completing the
stand, place the snare
drum on the arm.
Do not apply glue.
*Before attaching parts 10R and 10S, bend them into shape as shown in the diagram.
*Begin from the opposite
side to the seam.
Snare wire picture
*Roll up and attach.
*Roll up and attach.
Rubber arm
Stand
Rubber foot
Snare wire position
Head
Shell
Lug
Lug
Head
Shell
Upper part
Lower part
Seam
*NB: There are 8 10T parts altogether.
Align the marker lines on 10A
and 10B with the glue spots on
10C ~ 10H, and attach.
*Be sure to align the thick black marker lines
on the top and bottom (circled here in blue)
when attaching.
*Take note of where
the thick marker line is.
*Do not apply glue to .
Snare drum
*Align the snare
wire position here.
PAGE07
Drum set : Assembly Instructions
PAGE12
*Align the reverse
sides and attach.
*Align the reverse
sides and attach.
*Align the reverse
sides and attach.
*Align the seams
and attach.
*Align the seams
and attach.
*Align the seams
and attach.
Ride cymbal
PAGE13
Crash cymbal
*Align the seams
and attach.
*Roll up and attach.
*Roll up and attach.
Rubber foot
Rubber foot
Stand
Stand
Cymbal stand nut
Die-cast joint
Die-cast joint
Angle adjustment tilter
Die-cast joint
Die-cast joint
Cymbal
Cymbal
*Align the reverse
sides and attach.
Felt for clutch
*Align the seams
and attach.
*Align the seams
and attach.
*Align the
reverse sides
and attach.
PAGE08
Drum set : Assembly Instructions
PAGE14
Hi-hat cymbal
Rubber foot
Stand
Extension rod
Hi-hat clutch
Hi-hat cymbal
Die-cast joint
*The hi-hat cymbal moves
when you press the foot pedal.
*Put the pieces back to back
and attach together.
*Back side of 14C
Curl.
Foot pedal
Foot pedal
*Roll up and attach.
*Roll up and attach.
Hi-hat cymbal
*Align the seams and attach.
*Align the seams
and attach.
*Align the seams
and attach.
*Align the seams
and attach.
*Align the reverse
sides and attach.
*Do not apply glue to .
PAGE14 15
PAGE09
Drum set : Assembly Instructions
PAGE15
*Bend the pieces
left and right to
open a gap.
*Back side of 16B
Drum pedal
PAGE16
Drum stool
Seat
Leg
Rubber foot
*The felt beater moves when you press the foot pedal.
Foot pedal
Felt beater
Frame
*Align the reverse
sides and attach.
Do not apply glue.
*Roll up and attach.
*Align the reverse
sides and attach.
*Align the reverse sides and attach.
Ride cymbal
Crash cymbal
Tom-tom 13" x 10"
Tom-tom 12" x 9"
Hi-hat cymbal
Snare drum
Floor tom
Drum stool
Bass drum
Drum pedal
PAGE10
Drum set : Assembly Instructions
Display stand
*The completed photo is an image of a basic drum set. The parts can be arranged to your liking.
*Fold inside and attach.
Display stand
Display stand
PAGE17 18 19
PAGE20 21
PAGE21 22
View of completed model
Altri manuali per creative park
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Canon Giocattolo
Canon
Canon Floral Teddy Bear Manuale utente
Canon
Canon Creative Park Ragdoll Manuale di programmazione
Canon
Canon CREATIVE PARK (Moving) Clowns out of a... Manuale utente
Canon
Canon Creative Park Budgerigar Manuale utente
Canon
Canon PAPER CRAFT Whooper Swan Manuale utente
Canon
Canon Creative Park Clowns on funny unicycles Manuale utente
Canon
Canon PAPER CRAFT Rainbow beetle Manuale utente
Canon
Canon Paper Craft Sydney Opera House(Australia) Manuale utente
Canon
Canon Super Glider Manuale utente
Canon
Canon CREATIVE PARK Moving Money Box: Pig Manuale utente
Canon
Canon CREATIVE PARK Five-storied pagoda of Horvuji Temple,... Manuale utente
Canon
Canon Creative Park Matryoska doll Manuale utente
Canon
Canon PaperCraft Halloween/Witch's Hat Manuale utente
Canon
Canon Creative Park Pop-up Card Christmas House Manuale utente
Canon
Canon CREATIVE PARK Pop-up Card Manuale utente
Canon
Canon CREATIVE PARK Reindeer Manuale utente
Canon
Canon CREATIVE PARK French Bulldog Manuale utente
Canon
Canon Creative Park 3D Decoupage St. Patrick's... Guida rapida
Canon
Canon PaperCraft Gift Box E Manuale utente
Canon
Canon Creativ Park Manuale utente
