Canvas PIXEL-NM Manuale utente
PIXEL TREE
PRODUCT NO. 000-0000-0
MODEL N0. 151-3568
ASSEMBLY INSTRUCTIONS
Toll-free: 1-888-670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
8.5”
11”
REMOTE MODEL N0. PIXEL-NM
2
TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS
Table of Contents 3
Important Safety Instructions 2-3
Part List 4
Assembly 5-11
Cleaning and Maintenance 11
Technical Data 11
Warranty 12
IMPORANT: Retain for future reference, and ready carefully.
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the pixel tree.
Caution! Always keep children under close supervision while they are using or
around this product.
Never leave children unattended.
WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let LEDs rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electrical product—not a toy! To avoid risk of fire, burns, personal injury and electric shock, it
should not be played with or placed where small children can reach it.
• Do not use this product for anything other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper or any material not part of the product when in use.
• Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the
power is on.
• Do not perform any maintenance or troubleshoot for bad or broken LEDs while the power is on.
• Caution! To reduce the risk of fire and electric shock: a). Do not install on trees with needles, leaves or
branch coverings of metal or materials which look like metal, and b). Do not mount or support strings in a
manner that can cut or damage wire insulation.
• Read and follow all instructions that are on the product or provided with the product.
IMPORTANT SAFETY INSTRUCTIONS
3PRODUCT NO. 000-0000-0 | MODEL NO. 151-3568
USE AND CARE INSTRUCTIONS
• When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live
trees with needles that are brown or break off easily. Keep the tree holder filled with water.
• If the product is placed on a tree, the tree should be well secured and stable.
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed
wire insulation or cords, cracks in the LED holders or enclosures, loose connections or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including tree branches,
or bushes to avoid any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
CAUTION
• This lighting string is rated 6 Volt DC.
Do not replace or modify any connectors on this product. Discard product if connector is damaged. Make
sure connectors are fully inserted and any connector rings are twisted until completely secured such that the
ring can no longer be turned and the two portions of the connector are completely assembled.
• Do not use a dimmer switch or install any additional Christmas lighting or ornamentation that is powered by
a light bulb socket. Doing this may result in damage to your light string or cause personal injury. This action
will result in a void of the limited warranty of this product.
This Class [B] digital apparatus complies with Canadian ICES-005.
CAUTION
• Do not operate this product while it is still in the packaging.
• Battery is to be inserted with the correct polarity.
• Replace only with 27A 12V battery.
• Exhausted battery is to be removed from the battery holder.
• The supply terminals are not to be short circuited.
• Do not throw battery into fire.
• Battery should never be left in the product when not in use for long periods of time.
• Never allow any plastic part to come in contact with a source of heat or flame.
• This is a Christmas decoration. This is not a toy. Keep out of the hands of small children.
DISPOSAL AND RECYCLING
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice. This applies to the battery as well.
Tree base - 1
1
Collapsible lighted
tree frame with
5 pre-programmed
songs control box and
a power box - 1
2
Lighted star frame - 1
3
Support pole - 2
4
4
Lawn stake - 4
5
Remote control - 1
6
PART LIST
5PRODUCT NO. 000-0000-0 | MODEL NO. 151-3568
ASSEMBLY
Step 1
Requires 1
No tools required (Hammer optional).
2 people recommended for assembly.
Retain carton for storage.
Determine the final display location before assembling the tree. The Tree must
be placed on level ground. Place the tree base 1 in the desired location.
Step 2
Requires 1, 2
Center and then place the lighted tree frame 2 over the top of the tree base 1.
Be sure that the light string cord is not under the tree base 1
1
2
6
ASSEMBLY
Step 3
Requires 1, 4
Insert the bottom pole section 4 (tapered end up) into the tree base 1 as
illustrated.
4
44
1
2
1
1
4
Requires 1, 2, 4
Align the top pole 4 (tapered end up) toward the center of the tree frame 2
next to the bottom pole 4
Step 4
7PRODUCT NO. 000-0000-0 | MODEL NO. 151-3568
ASSEMBLY
Step 5
Requires 2, 4
Raise the tree frame 2 by lifting from the tree top point and place over the top
pole 4. Insert the top pole 4 into the pole cap located on the inside top of the
tree frame 2
Step 6
Requires 1, 2, 4
Proceed in lifting the tree frame 2 and
place the top pole 4 on top of the bottom
pole 4 which is already secured in the tree
base 1
22
4
4
42
4
8
ASSEMBLY
Requires 1, 2, 6
This tree includes 5 pre-programmed songs control box 2. The control box 2
enables the user to play with or without music by using the remote 6
When the tree is turned OFF and then turned back on it will default to the
light show with music automatically.
NOTE: Mounting pegs have been affixed to the 5 pre-programmed songs
control box 2 in order to provide elevation; enabling accessibility to the
control box and power box 2, due to the potential of a snowfall. Proceed in
mounting the 5 pre-programmed songs control box 2 onto the tree base 1 into
the two eyelets provided.
Step 7
Requires 1, 2
The tree base 1 has spring hooks
located on the outer edge of the tree
base 1. Connect each spring hook to
the corresponding chain on the tree
frame 2
Check to make sure that the chain links
are straight and even prior to attaching
to the base.
Straighten any twists in the links prior
to attaching.
Step 8
2
1
2
1
1
2
Spring
hook
Support
chain
To release a twist if chain link is
already attached, unhook chain link
from the base, apply pressure to the
top and bottom of the frame at the
section where the twist is located.
Move link back into place and then
release the frame. Re-hook chain link
to the base.
9PRODUCT NO. 000-0000-0 | MODEL NO. 151-3568
ASSEMBLY
10
ASSEMBLY
Step 9
Requires 2, 4
Mounting the speaker box to the tree frame 2 as shown.
Step 10
Requires 3
Place the star 3 to the top of the tree.
2
2
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Canvas Accessori per l'illuminazione domestica
