Caple FGC610 Manuale utente
Instruction manual for wall chimney hoods
Model codes: FGC610 / FGC710 / FGC910
Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk
1 .
2.Use a cross point screwdriver to remove two
screws that fix the bottom light panel in position.
3.Pull the light panel to the back and remove.
It is located by two lugs.
4.With the light panel removed there is access into
the chimney to fit the carbon filter.
5.Locate the back edge of the filter in position and
push into position. The filter has two plastic
brackets that “snap” into two slots in the body.
6.Refit light panel.
7.Refit metal grease filter.
1. With the grease filter removed, from inside the hood press the light fixture out of its mounting bracket.
Questo manuale è adatto per i seguenti modelli
2
Altri manuali Caple Cappa di ventilazione
Caple
Caple Ceramica CR700W Manuale utente
Caple
Caple TSCH601 Manuale utente
Caple
Caple INCH Manuale utente
Caple
Caple CCH600BK Manuale
Caple
Caple DD901BK Manuale utente
Caple
Caple CGC710BK Manuale
Caple
Caple CSB606 Manuale utente
Caple
Caple DD940BK Manuale utente
Caple
Caple pi650wh Manuale tecnico
Caple
Caple BU520 Manuale utente
Caple
Caple CCH100 Manuale
Caple
Caple TSCH600 Manuale utente
Caple
Caple 1MBUCH2 Manuale utente
Caple
Caple CHIMNEY FGC600SS Manuale utente
Caple
Caple ST851 Manuale utente
Caple
Caple OM600 Manuale utente
Caple
Caple 1MINCH7 Manuale utente
Caple
Caple CGC611 Manuale utente
Caple
Caple CE900 Manuale utente
Caple
Caple CC400WH Manuale utente
