Caple WMI4001 Manuale utente
Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk
Integrated Washing Machine
Instruction Manual
WMI4001
2Instruction manual WMi4001 Please keep this instruction manual for future reference
CONTENTS
Warnings 3
Environmental Protection 8
Warranty 8
Product Overview 9
Installation 10
Built In Installation 12
Operation 14
Quick User Guide 17
Control Panel 18
Washing Programmes 26
Table Of Programmes 28
Cleaning And Maintenance 30
Troubleshooting 32
Care Symbols 35
Caple Contact Details 36
3
Instruction manual WMi4001
Please keep this instruction manual for future reference
WARNINGS
-If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
-The new hose-sets supplied with the appliance are to
be used and old hose-sets should not be reused.
-This washing machine is for indoor use only.
-This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
-Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
-Children should be supervised to ensure that they do
not play with the appliance.
-Children of less than 3 years should be kept away
unless continuously supervised.
-If the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.
-Only use the hose-sets supplied with the appliance for
the water supply connection (do not reuse old
hose-sets).
4Instruction manual WMi4001 Please keep this instruction manual for future reference
-Water pressure must be between 0.05 MPa and
0.8 MPa.
-Make sure carpets or rugs do not obstruct the base or
any of the ventilation openings.
-After installation, the appliance must be positioned so
that the plug is accessible.
-The maximum load capacity of dry clothes depends on
the model used (see control panel).
-To consult the product technical specification please
refer to the manufacturer website.
-This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
-Pull out its plug from the power socket and turn off the
ater tap before cleaning or maintenance.
-Make sure that all pockets are emptied.
-Sharp and rigid items such as coins, nails, screws or
stone etc may cause serious damages to this machine.
-Pull out its plug and cut off water supply after
the operation.
-Please check whether the water inside the drum has
been drained before opening its door. Please do not
open the door if there is any water visible.
5
Instruction manual WMi4001
Please keep this instruction manual for future reference
-Pets and children may climb into the machine. Check
the machine before every operation.
-Take care that power voltage and frequency shall be
identical to those of washing machine.
-Do not use any socket with rated current less than that
of washing machine.
-Never pull out power plug with wet hands.
-Do not pull on the power cord or appliance to unplug
the machine.
-To ensure your safety, the power cord plug must be
inserted into an earthed three-pole socket. Check
carefully and make sure that your socket is properly
and reliably earthed.
-Packing materials may be dangerous to children.
Please keep all packing materials (plastic bags, foams
etc) far away.
-Washing machines shall not be installed in bathrooms
or wet rooms as well as in the rooms with explosive or
caustic gases.
-The water and electrical connections must be
connected by a qualified engineer in accordance
with the manufacturer’s instructions and local safety
regulations.
-Before operating this machine, all packages and
transport bolts must be removed. Otherwise the
washing machine may be seriously damaged while
washing the clothes.
6Instruction manual WMi4001 Please keep this instruction manual for future reference
-This appliance is intended to be used in household and
similar applications such as:
› Staff kitchen areas in shops, offices and other
working environments.
› Farm Houses.
› By clients in hotels, motels and other residential type
environments.
› Bed and breakfast type environments.
-Before using the machine for the first time, the
washing machine shall be operated in one round of the
whole procedures without clothes inside.
-Your washing machine is only for home use and is only
designed for the textiles suitable for machine washing.
-Flammable and explosive or toxic solvents are
forbidden. Gasoline and alcohol etc shall not be
used as detergents. Please only select the detergents
suitable for machine washing.
-Do not wash carpets in this washing machine.
-Be careful of burning when washing machine drains
hot washing water.
-Never refill the water by hand during washing.
-Please remember to disconnect water and power
supply immediately after the clothes are washed.
-Do not climb up and sit on top cover of the machine.
-Do not lean against machine door.
7
Instruction manual WMi4001
Please keep this instruction manual for future reference
-Please do not close the door with excessive force. If it
is found difficult to close the door, please check if the
excessive clothes are put in or distributed well.
-Transport bolts shall be reinstalled to the machine by a
competent person.
-The accumulated water shall be drained out of
the machine.
-Handle the machine carefully. Never hold any
protruded part on the machine while lifting. Machine
door cannot be used as the handle during the
conveyance. During transport, never rest the door on
the trolley. Two people are recommended to lift the
washing machine.
-Do not expose the washing machine to rain, direct
sunlight or other weather elements. Protect from
possible freezing.
-The use of converters, multiple sockets or extension
cords is strongly advised against.
-In the event of fault and / or malfunction, turn off
the washing machine, close the water tap and do not
tamper with the appliance. Immediately contact Caple
service and only use original spare parts. Failure to
observe these instructions may jeopardise appliance
safety.
！
WARNING: Water may reach very high temperatures during the
wash cycle.
WARNING: Water may reach very high temperatures
during the wash cycle.
8Instruction manual WMi4001 Please keep this instruction manual for future reference
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice. This
appliance is marked according to the European Directive on Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. The symbol on the product indicates that
this product may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment. Disposal
must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local council, your household waste disposal service or the retailer where you
purchased the product.
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with all
applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).
UKCA DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies with all
applicable legislation.
TECHNICAL FICHE
This appliance conforms to all current and applicable energy regulations. To view the Technical
Fiche that supports the energy labelling data, please visit the product page on our website
www.caple.co.uk
WARRANTY
Your new appliance is covered by warranty. The warranty card is enclosed - if it is missing, you
must provide the following information to your retailer in order to receive a replacement: date
of purchase, model and serial number (placed on the inside of the appliance storage drawer).
Registration can also be completed online by visiting www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service together
with proof of purchase.
If you fail to show your warranty card you will incur all repair charges.
Spare parts are only available from Caple Service and spare parts authorised centres.
9
Instruction manual WMi4001
Please keep this instruction manual for future reference
Inlet pipe
Transport
eloh gulp
Door
Detergent DrawerControl Panel
Power Plug
Outlet Hose
Detergent Box
Inlet pipe
Transport
eloh gulp
Door
Detergent DrawerControl Panel
Power Plug
Outlet Hose
Detergent Box
PRODUCT OVERVIEW
COMPONENT
ACCESSORIES
Corrugated sound
proofing sheet
10 Instruction manual WMi4001 Please keep this instruction manual for future reference
INSTALLATION
UNPACKING THE WASHING MACHINE
Unpack your washing machine and check if there is any damage during the transportation. Also
make sure that all the items (as shown on page 9) in the attached bag are received. If there is
any damage to the washing machine during the transportation, or any item is missing, please
contact your retailer immediately.
DISPOSE OF THE PACKING MATERIALS
！
WARNING:
Keep packaging materials away from children.
The packing materials of this machine may be dangerous to children. Please dispose of them
properly. Please dispose of the related packing materials according to the relevant local
regulations. Please do no throw the packing materials away together with the other daily
living disposals.
REMOVE TRANSPORT BOLTS
Before using this washing machine, transport bolts must be removed from the backside of this
machine. Please take the following steps to remove the bolts:
1. Loosen all bolts with spanner and then remove along with the flat washers, rubber bungs
and plastic spacer tubes.
2. Cover the open transportation bolt holes with the plastic
cap included in the instruction bag.
3. Keep the transport bolts, flat washers, rubber bungs and
plastic spacer tubes stored away safely for future use.
NOTE:
During the removal of the bolts, spacer tubes fall inside the product. These can be removed
by tilting the product forward and recovering them from the floor or inside the base of the
machine.
Indice
Altri manuali Caple Rondella
Caple
Caple WMI2006 Manuale utente
Caple
Caple WMI1010 Manuale utente
Caple
Caple WMi1012 Manuale utente
Caple
Caple WMF1020 Manuale utente
Caple
Caple WMI3005 Manuale utente
Caple
Caple WMI3001 Manuale utente
Caple
Caple WMF1020 Manuale utente
Caple
Caple WMI4000 Manuale utente
Caple
Caple WMi2001 Manuale utente
Caple
Caple WMI2004 Manuale utente
