Caple WI6134 Manuale utente
Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk
undercounter wine cabinet
instruction manual
WI6134 & WI6134WH
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
2
CONTENTS
Important safety instructions 2
Installation instructions 8
Before using your wine cabinet 8
Operating and setting the temperature 10
Control Panel 10
Using the shelves 12
How to change the door opening 13
Installing the bar handle 14
Fitting a kitchen plinth 15
Installation dimensions 16
Fixing the top fixing bracket 17
Using the foot sliders 18
Care and maintenance 19
Troubleshooting guide 21
Defrosting/condensation 22
The humidity system 22
Recommended storage temperatures 22
Recommended drinking temperatures 22
Technical Data 23
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
3
INTRODUCTION
Thank you for buying your new Caple Wine Cabinet.
To ensure that you get the best results from your new purchase, we strongly suggest
that you read this instruction manual thoroughly before use. This manual contains
installation advice, usage instructions and other important facts about your Caple
Wine Cabinet. If treated with care your Caple Wine Cabinet will give you many years
of trouble free use.
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
4
WARNINGS
-To prevent damaging the door gasket, make sure the
door is fully open when pulling shelves out of the rail
compartment.
-The appliance must be positioned so that the plug is
accessible. Release the electric cord and move your
cabinet to its final location. Do not move your cabinet
while loaded with wine as you may distort the body.
-The wine cabinet should be installed in a suitable place
in order to avoid touching the compressor.
-After unpacking, make sure that the appliance is in
perfect order. If you have any doubt, do not use it and
contact your retailer.
-If the supply cord is damaged, it must be replaced by
a Caple service agent or a similarly qualified person in
order to avoid a hazard.
-This product is not designed for commercial use, it is a
household appliance only.
It is not intended to be used in:
• Staff kitchen areas in shops, offices and other working
environments
• Bed and breakfast type environments
• By clients in hotels, motels and any other residential
type environments
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
5
-This appliance is intended to be used exclusively for the
storage of wine.
IMPORTANT
Caple cannot be held liable for any non
compliance with these instructions.
ELECTRICAL SHOCK HAZARD
To reduce the risk of fire, electrical shock, or injury when using
your appliance, follow these basic precautions:
-Read all instructions before using the wine cabinet.
-DANGER or WARNING: Risk of child entrapment.
-Before you throw away your old wine cabinet: Take off
the door, leaving the shelves in place so that children
cannot easily climb inside.
-Never allow children to operate, play with, or crawl
inside the appliance.
-Never clean appliance parts with flammable fluids. The
fumes can create a fire hazard or explosion.
-Do not store or use gasoline or any other flammable
vapours and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or
explosion.
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
6
-The refrigerant of this appliance is R600a, flammable
and explosive articles should not be put in or near the
cabinet, to avoid the risk of fire or explosion.
-This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance.
-Cleaning and user maintenance shall not be made by
children without supervision.
-When positioning the appliance, ensure the supply cord
is not trapped or damaged.
-Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the appliance.
-Do not use plug adapter.
Symbol ISO 7010 W021
Warning; Risk of fire / flammable materials
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
7
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice. This appliance is marked according to the European directive on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The symbol
on the product indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local council, your household waste disposal service or
the retailer where you purchased the product
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies
with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic
Compatibility (EMC).
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
8
INSTALLATION
Before using your wine cabinet
- Remove the exterior and interior packing.
-IMPORTANT: Before connecting the wine cabinet to the power source, let it stand
upright for at least 12 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
- Clean the interior surface with lukewarm water using a soft cloth.
Before installation, turn the unit off and unplug it from the outlet.
NOTE
To protect the appliance in transit and delivery the door is packed tightly against the
cabinet. When first installed this can mean the door seal appears thinner on one
side of the door due to compression, this is normal and once out of the box it will
relax over a short period of time and the door will return to the normal position. If
you wish to speed up the process you can gently warm the seal with a hair dryer on
a low temperature setting. This can help relax the seal helping it return to normal
thickness a little faster.
INSTALLATION OF YOUR WINE CABINET
- Place your wine cabinet on a floor that is strong enough to support it when it is
fully loaded.
- To level your wine cabinet, adjust the front levelling leg at the bottom of the
cabinet.
- Ensure it is perfectly level, as this will minimise any vibrations.
- This appliance uses flammable refrigerant. Never damage the cooling pipework
during transportation.
- Locate the wine cooler away from direct sunlight and sources of heat (ovens,
hobs, heaters, radiators, etc.). Never clean appliance parts with flammable fluids.
The fumes can create a fire hazard or explosion. When disposing your appliance,
please choose an authorized disposal site.
- Avoid locating the unit in moist areas.
- It is fitted with a power cord having an earth wire terminating in a 13amp plug.
- Ensure the product is correctly ventilated (see page 15).
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
9
- Consult a qualified electrician or service engineer if the earthing instructions are
not completely understood.
- Plug the wine cabinet into an exclusive, properly installed-grounded wall outlet.
Do not under any circumstances cut or remove the third (ground) pin from the
plug. Any questions concerning power and/or grounding should be directed
toward a certified electrician or Caple service.
WARNING: INCORRECT EARTHING CAN RESULT IN THE
RISK OF ELECTRIC SHOCK
Attention!
- Store wine in sealed bottles
- Do not overload the cabinet
- Do not open the door unless necessary
- Do not cover shelves with aluminium foil or any other shelf material which may
prevent air circulation
- Should the wine cabinet be stored without use for long periods it is suggested,
after careful cleaning, to leave the door ajar to allow air to circulate inside the
cabinet in order to avoid possible formations of condensation, mould or odours.
- Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction;
- Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer;
- Do not damage the refrigerant circuit;
- Do not use electrical appliances inside the storage compartments of the appliance,
unless they are the type recommended by the manufacturer
Instruction manual Wi6134 & Wi6134WH
Please keep this instruction manual for future reference
10
OPERATING YOUR WINE CABINET
Please use the cabinet within ambient temperatures between 16-32ºC, if the
ambient temperature is higher or lower than this, it will cause the temperature to
fluctuate in the cabinet, possibly preventing it from reaching 5-18ºC.
SETTING THE TEMPERATURE
- The temperature setting is range as below:
Upper compartment: 5 - 10ºC
Lower compartment: 10 - 18ºC
- When the system enters the temperature set up. With each press on the key,
the temperature setting of the upper zone will decrease by1 ºC. When the
temperature setting reaches the lower limit of 5ºC, the temperature will return
to 10ºC. Each press on the and the temperature setting of the lower zone will
decrease by 1ºC. When the temperature setting reaches the lower limit 10ºC, the
temperature will return to 18ºC.
- If you wish to view the actual temperature inside the wine cabinet. Please press
the or key and hold for 3-5 seconds. The actual temperature of the upper
zone or the lower zone will be displayed on the control board. After 5 seconds the
temperature will return to display the set temperature.
- Flashing LED = Cabinet Temperature
- Steady LED = Set Temperature
NOTE
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the wine
cabinet will not start.
When you use the wine cabinet for the first time or you restart the cabinet after
having been shut off for a long time, there could be a few degrees variance
between the temperature you select and the one indicated on the LED readout.
This is normal and it is due to the length of the activation time. Once the wine
cabinet has been running for a few hours everything will be back to normal.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Caple Refrigeratore per vino
Caple
Caple JLWF302 Manuale
Caple
Caple Wi153 Manuale utente
Caple
Caple WF1544 Manuale utente
Caple
Caple Wi3112 Manuale utente
Caple
Caple Wi6224 Manuale utente
Caple
Caple WCi46B Manuale utente
Caple
Caple Wi6125 Manuale utente
Caple
Caple Wi6128 Manuale utente
Caple
Caple WI6118 Manuale utente
Caple
Caple WC6114 Manuale utente
