4.Searching process
Tostart SCAN function, press FUNCTION button 1 , then select and
press button which is shown on display, using knob from MMI control
panel 2 . Fig.5, Fig.6
Fig.6
Process of searching and adding new stations can take about 40 sec. After
finish of SCAN procedure number of added multiplex will be shown on
display 3 , then device will start playing last listening station or first station
from list (if last listened station is not available).
3 M=0 means that is not found any multiplex.
Name radio station
Name multiplex
rys.7
Fig.7
Warning! When received station has poor quality Signal, sound can
disappear for short moments or completely.
