Cartft FleetPC-2 Manuale utente
Assembling CarTFT FleetPC-2
Remove all the screws as following:
Remove the left cover
Now you are able to remove the harddrive cover and set it apart for a while.
Remove the case cover
Start to remove the Heatpipe. It is fixed with the following two screws
( Note: One end is shorter than the other one )
Pull the Headpipe out (in the direction of the arrows)
Please do not use some tools to do this. If you just move the heatpipe a litte bit up and down,
you will be able to remove it easily.
Now, do the same on the other side.
Remove the IDE Cable
Remove the ATX Cable.
Remove the screws of the Mainboard.
Also remove the USB, Power and LED Cable
Take the Mainboard out of the case and set it apart.
At the bottom of the mainboard you will find the screws for the cooling unit. You have to remove
this screws to place the CPU on the right place.
Altri manuali per FleetPC-2
1
Altri manuali Cartft Accessori per automobili
Cartft
Cartft FLEETPC-8-I7BPOE Manuale utente
Cartft
Cartft CALU-MC Manuale utente
Cartft
Cartft FLEETPC-ARM-300 Manuale utente
Cartft
Cartft FleetPC-11 Series Manuale utente
Cartft
Cartft FleetPC-2 Manuale utente
Cartft
Cartft FleetPC-5-B Manuale utente
Cartft
Cartft FleetPC-8-i7C Manuale utente
Cartft
Cartft FLEETPC-ARM-300 Manuale utente
Cartft
Cartft FleetPC-5-B Manuale utente
Cartft
Cartft InDash CarPC Manuale utente
