Cartoni MASTER 65 Manuale utente
PROFESSIONAL CAMERA SUPPORT
USER’S MANUAL & Maintenance
2
3
Index
1.
IntroductIon 4
2.
operatIng elements 5
3.
procedures 8
4.
specIfIcatIons 9
5.
maIntenance 10
6.
Warranty 10
7.
accessorIes & product lIne 11
CARTONI ®
All rights reserved ©
Manual Version: 1.0
Issue date: July 2019
4
1. IntroductIon
Designed to support Camera weights from 20 Kg (44 lbs) to 65 Kg (143
lbs), the new MASTER 65 is ideal for outdoor Broadcast with bulky boxed
lenses.
Depending on Center of Gravity (CG) posion, the maximum payload is:
•At 200 mm: 65 kg
•At 175 mm: 70 kg
•At 150 mm: 80 kg
It combines a wide range of counterbalance capabilies, performing
perfect balance at any lt angle with a new CARTONI Fluid drag system
based on a silicon lubricated fricon. The new drag ensures almost free-
wheeling at its minimum, up to a consistent drag for smooth and slow
movements with long focal lengths.
This rugged Head comes equipped with the standard Dovetail plate
on a large sliding plaorm. The micrometric movements of the slide are
operated by a handy crank placed under the slide plate.
All sengs are ergonomic and placed in the right posions. Pan Bars are
compable with the Vinten aachment. MASTER 65 comes equipped with
a digital readout for counterbalance reference and illuminated bubble level.
The MASTER 65 at base interfaces with Mitchel mount Tripods,
Pedestals and other supports via 4 bolts xing system, 2 ¾” castle-nut or a
M12 threaded central knob.
Before using the MASTER 65 Fluid Head, please make sure
to read this user’s & maintenance manual;
Before installing the Fluid Head on the Tripod check the
Tripod stability;
5
1
Camera plate
2
Right handle aachment
3
Right handle
4
Right handle aachment lever
5
Camera plate lock lever
6
Baery housing
7
Transport handle
Check that the Camera payload (including lenses and
accessories) is lower than the maximum capacity of the
MASTER 65 Fluid Head;
Before installing the Camera make sure that the MASTER
65 is in good condions and bares no evident damages.
2. operatIng elements
❺ ❻ ❼
❹
❷
❶
❸
6
8
Horizontal lock buon (On)
9
Horizontal lock buon (O)
10
Tilt lock lever
11
Pan lock lever
12
Tie down knob
13
Sliding plate lock lever
14
Le pan handle aachment
15
Le pan handle aachment lever
16
Sliding plate crank
17
Le extensible handle
18
Pan drag selector
19
Counterbalance selector
⓮ ⓰⓯ ⓱
❽
❾
❿
⓫
⓬
⓭
7
14
Le pan handle aachment
15
Le pan handle aachment lever
16
Sliding plate crank
17
Le extensible handle
18
Pan drag selector
19
Counterbalance selector
20
Digital display
21
Illuminated bubble level and display light buon
22
Illuminated bubble level
23
Tilt drag selector
⓳ ⓴
⓲
� �
21 22
�
23
8
Open the Tripod to the desired height and lock all safety knobs.
Place the MASTER 65 Fluid Head on the Tripod base and rotate unl
it matches the steel notch; ghten the Head rmly by screwing in
the knob (12) underneath the at base. Check the illuminated bubble
level (22) and modify the legs angle if needed. In case of low visibili-
ty, press buon (21) for illuminated bubble level and to acvate the
digital displays. Lights will turn o automacally aer approximately
30 seconds.
Lock the horizontal posion with buon (8), insert pan lock (11) and
turn both lt drag selector (23) and counterbalance selector (19) to
posion “0”.
To release the Camera plate (1) slide forward the Camera plate lock
lever (5) and rotate it 90° counterclockwise, then remove the Camera
plate.
Aach the Camera plate under the Camera assembly and rmly
secure it with both screws. Try to place the Camera plate centered
under the Camera system, keeping in mind the posion of the center
of gravity (CG).
Place the Camera on the top of the MASTER 65, by pushing the
Camera plate (1) forward to perfectly match the sliding plate proper
posion, then close the Camera plate lock lever (5).
Holding the pan bar (17) rmly, disengage horizontal lock with buon
(9) and nd the correct center of gravity (CG) by sliding the Camera
assembly fore-and-a using the sliding crank (16) (extract the knob to
rotate). Lock the sliding plate with lever (13).
3. procedures
9
Set the counterbalance system by turning the counterbalance selector
(19) to the appropriate tension. The Camera has to stay sll at any lt
angle. If needed, ne tune the balance by adjusng the sliding plate.
Push buon (21) to acvate illuminated digital displays (20), unlock
Pan lock (11) and select the desired Fluid drag intensity on both Pan
and lt by turning Pan selector (18) and lt selector (23).
Minimum payload 20 Kg 44 lbs
Maximum payload 80 Kg 176 lbs
Weight 16 Kg 35,3 lbs
Bowl diameter Flat base
Fluid control Connuous
Counterbalance Connuous
Pan range 360°
Tilt range +/- 65°
Temperature range -40/+60 °C -40°/+140°F
4. specIfIcatIons
10
5. maIntenance
6. Warranty
When needed, with indoor use just clean the Head and Tripod with a
so cloth. Dirt accumulated during storage may be removed using a brush
or Air spray.
CARTONI products main mechanisms are sealed as they are also built
for professional outdoor use.
However, use under rough condions they will require special care. Salt
water is very corrosive and can cause extreme damages. In aempt to avoid
further damage the Fluid Head should be washed o with fresh water at
the earliest opportunity and perfectly dried before storage.
Sand and dirt are abrasive and should be removed using a semi-s
brush or Air spray.
Disconnect the illuminated display & bubble level baery during long
term storage; for baery replacement access the baery compartment (6).
All CARTONI Fluid Heads & Pedestals have a free of charge three (3)
year warranty. Register your product at www.cartoni.com within 30 days
from date of rst purchase/invoice to receive further two (2) year warranty
for the unsurpassed free ve (5) year warranty.
Tripods, spreaders, dollies and all accessories are guaranteed one (1)
year from the date of rst purchase/invoice.
CARTONI warrant that the product supplied will - under proper use -
be free from defects in workmanship and materials and agrees that it will,
Indice
Altri manuali Cartoni Accessori per fotocamere
Cartoni
Cartoni MAGNUM Manuale utente
Cartoni
Cartoni P20 Manuale utente
Cartoni
Cartoni MASTER 40 Manuale utente
Cartoni
Cartoni STEERING P70 Istruzioni per il montaggio
Cartoni
Cartoni MASTER MK2 Manuale utente
Cartoni
Cartoni FOCUS 8S Manuale utente
Cartoni
Cartoni MAXIMA 30 Manuale utente
Cartoni
Cartoni MAXIMA 30 Manuale utente
Cartoni
Cartoni MAGNUM Manuale utente
Cartoni
Cartoni focus hd Manuale utente
Cartoni
Cartoni LIFTO 25 Manuale utente
Cartoni
Cartoni FOCUS 22 Manuale utente
Cartoni
Cartoni HiDV Manuale utente
Cartoni
Cartoni UV-C BOXER Manuale utente
Cartoni
Cartoni Master Manuale utente
Cartoni
Cartoni focus hd Manuale utente
Cartoni
Cartoni MAXIMA 5.0 Manuale utente
Cartoni
Cartoni P70 PLUS Istruzioni per il montaggio
Cartoni
Cartoni Canon DIGISUPER XJ27X6.5B Manuale di programmazione
Cartoni
Cartoni MASTER 40 Manuale utente
