CAS SW-2 Manuale utente
Industrial Weighing Sytems assumes no responsibility for the accuracy of the
calibration instructions extracted from manufactureres documentation.
Industrial weighing systems provides repairs to all insturments and load cells.
Calibration services available.
Should you require additional information please do not hesitate to contact IWSystems
Check out our products at www.iswystems.ca
Industrial Weighing Systems
9 Richmond St. Picton, ON Canada K0K 2T0
Ph: 613-786-0016 Cell: 613-921-0397 Fax: 613-476-5293
SW Series
Simple Weighing Scale
OWNER’S MANUAL
CONTENTS
PRECAUTIONS 4
PREFACE 6
NAMES AND FUNCTIONS 6
OPERATIONS 7
1. General Weighing 8
2. Weighing with Tare 8
3. How to Convert the Unit of Weight 9
4. Hold Function 9
5. How to Set Auto Power Off 10
ERROR MESSAGE 11
SPECIFICATIONS 11
4
PRECAUTIONS
Do not subject the scale to sudden
temperature changes.
Place the scale on a flat and stable
surface.
Do not subject the platter to sudden
shocks. This scale must be installed in a dry
and liquid free environment.
Make sure that you plug your scale into the proper power outlet.
Plug into a power outlet 10 minutes before operations.
5
Keep the scale away from strong EMI noises may cause incorrect weight
readings.
If the scale is not properly
level, please adjust the 4 legs
at the bottom of the scale
(turn legs clockwise or
counterclockwise) so as to
center the bubble of the
leveling gauge inside the
indicated circle.
Leveling gauge
6
PREFACE
NAMES AND FUNCTIONS
Thank you for purchasing our CAS SW Series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the SW Series.
Please keep it handy for future reference.
OVERALL VIEW
PLATTER
DISPLAY ADJUSTING
BOLT
KEYBOARD
DISPLAY & KEYBOARD
MODEL: SW-1
ZERO
NET
CAPACITY: 2 X0.001kg
ZERO
HOLD ON
OFF
TARE
7
FUNCTION
ON
OFF
TARE
UNIT
HOLD
ZERO
Used to set the zero point.
Used to enter a tare weight and used to cancel a tare weight.
Used to convert the unit of weight.
When the weight is not stable, display will show the average weight
for 4 seconds.
Turn on and off the display.
KEYS FUNCTIONS
OPERATIONS
Turn on the display by pressing ON/OFF key.
Then the display will show all the segments and count up "0" to "9".
(If you want to stop it, press the ZERO key.)
When you turn on the display, make sure that platter is empty.
Otherwise, display will show the "Err 1". (Refer to ERROR MESSAGE)
The display indicates if the scale is at ZERO or if there is a TARE Entered
into the scale by way of a ZERO and NET lamps.
When the weight of commodity is stable, display will show the (STABLE)
lamp.
When the display is not zero though there is nothing on the platter, press
the ZERO key.
MODEL: SW-1
ZERO
NET
CAPACITY: 2 X0.001kg
ZERO
UNIT ON
OFF
TARE
8
1. General Weighing
Place a commodity on
the platter.
Remove the commodity
from the platter.
2. Weighing with Tare
Tare is the weight of container being used for a commodity.
The TARE key subtracts the weight of the container.
kg kg
kg
ZERO TARE
kg
Place a container on
the platter.
Press the TARE key. Place a commodity in the
container, then the display will
show only the weight of
the commodity.
kg
ZERO
HOLD ON
OFF
TARE
kg kg
Remove the container and
commodity, then the display
will show the weight of
the container with "-" sign.
Press the TARE key, then
display will show the "0.000".
kg
ZERO
HOLD ON
OFF
TARE
kg
9
3. How to Convert the Unit of Weight
Press the UNIT key, then the display will show the "UnIt" for a second.
Press the UNIT key until the display shows the unit that you wish to take.
4. Hold Function
NOTE: Unit of measure is g, kg, lb, and oz selectable by pressing UNIT key.
When the weight is not
stable, press the HOLD key.
Display will show the
"HOLD" for four seconds.
And then the display will
show the average weight five
times.
ZERO
HOLD ON
OFF
TARE
kg kg
kg
Remove the commodity
from the platter.
kg
10
5. How to Set Auto Power Off
Auto-Power off makes the battery's life longer.
When you don't operate the scale, this function makes the power OFF
automatically.
Before setting the Auto Power Off, make sure that the power is OFF.
While you press the ZERO
key, press the ON/OFF key,
then you will see the AP-10.
(If you have set this before,
display will show previous
value.)
Press the TARE key, until
the display shows the "AP-x0"
that you wish to take.
(Refer to TABLE 1.)
Press the ZERO key, then
the scale saves what you
programmed and shows all the
segments and count up "0" to "9".
ZERO
HOLD ON
OFF
TARE ZERO
HOLD ON
OFF
TARE
kg
DISPLAY FUNCTION
AP-00 This function does not make the power off automatically.
AP-10 If you don't operate the scale for 10 minutes, this function makes the power OFF.
AP-20 If you don't operate the scale for 20 minutes, this function makes the power OFF.
AP-30 If you don't operate the scale for 30 minutes, this function makes the power OFF.
TABLE 1.
BATTERY
LOW BATTERY
When the battery is low, display will show the "BAT".
Please, replace the battery by a new one. Battery is located on the bottom of the
scale.
If you use the scale without replacing the battery, display will show "LObAt" and
then scale makes the power OFF.
It means that you can't operate the scale any more. So you must replace the
battery by a new one.
Altri manuali per SW-2
2
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali CAS Scala
CAS
CAS LP-1000N Series Manuale utente
CAS
CAS NC-1 Manuale utente
CAS
CAS CI-200 Series Manuale utente
CAS
CAS CASTON II Manuale utente
CAS
CAS PD-II Manuale utente
CAS
CAS PW-2H Manuale utente
CAS
CAS AP-US Series Manuale utente
CAS
CAS CL3500 Series Manuale utente
CAS
CAS Retail PR-T Series Manuale utente
CAS
CAS ECB Series Manuale utente
CAS
CAS GBF-1251 Manuale utente
CAS
CAS PB Series Manuale utente
CAS
CAS AP Plus-MX Manuale utente
CAS
CAS PR Plus-B Manuale utente
CAS
CAS PD-II Manuale utente
CAS
CAS PW Series Manuale utente
CAS
CAS HS-1 Manuale utente
CAS
CAS IE-100 Manuale utente
CAS
CAS CL7200 series Manuale utente
CAS
CAS CL5500 Series Manuale utente
