Casa Systems NetComm CloudMesh NF18MESH Manuale di servizio

casa systems

Restore Factory Default

Settings Guide

NF18MESH

NF18MESH –Restore Factory Default Settings Guide

FA01256 v1.0 23 June 2020

Doc No. FA01255

2 of 6

NF18MESH –Restore Factory Default Settings Guide

FA01256 v1.0 23 June 2020

The information contained herein is proprietary to Casa Systems, Inc. No part of this document may be

translated, transcribed, reproduced, in any form, or by any means without prior written consent of Casa

Systems, Inc.

Trademarks and registered trademarks are the property of Casa Systems, Inc or their respective subsidiaries.

Specifications are subject to change without notice. Images shown may vary slightly from the actual product.

Previous versions of this document may have been issued by NetComm Wireless Limited. NetComm Wireless

Limited was acquired by Casa Systems Inc on 1 July 2019.

Note –

This document is subject to change without notice.

Document history

This document relates to the following product:

Casa Systems NF18MESH

V e r .

D o c u m e nt d e s c r i pt i o n

D a t e

v1.0

First document release

23 June 2020

Table i. –Document revision history

3 of 6

NF18MESH –Restore Factory Default Settings Guide

FA01256 v1.0 23 June 2020

About Factory Resets

A factory reset on the NF18MESH returns all settings to the default settings as they were when shipped from

the factory.

Important –It is particularly important to perform a factory reset after upgrading the NF18MESH firmware to ensure the firmware

installation is completed correctly.

Factory Reset Methods

There are two methods that can be used to perform a successful factory reset:

Use the NF18MESH's graphical user interface (GUI) to complete a factory reset.

Manually perform a factory reset using the reset pinhole at the back of the NF18MESH.

This guide will explain both methods to complete a successful factory reset.

Web Interface Factory Reset

1Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type following address

into the address bar and press enter.

http://cloudmesh.net or http://192.168.20.1

Enter the following credentials:

Username: admin

Password: <The password printed on the back of the modem>

then click the Login button.

NOTE –Some Internet Service Providers use custom password. If login fails, contact your Internet Service Provider. Use your

own password if it is changed.

4 of 6

NF18MESH –Restore Factory Default Settings Guide

FA01256 v1.0 23 June 2020

Restore Default Settings from Web interface

1Click on the Advanced menu on the left-hand side of the screen, then click on the Configurations

option in the System group.

Tools –Navigate to Advanced Configurations

2To reset the NF18MESH to its factory settings, select the Factory Reset radio button and click the

Restore Default Settings button.

5 of 6

NF18MESH –Restore Factory Default Settings Guide

FA01256 v1.0 23 June 2020

Restore Default Settings

Note –You may also perform configuration Backup and restore configuration from this page.

3A pop-up dialog box will prompt: “Are you sure you want to restore factory default settings?”

Reset command confirmation dialog

4Click OK to confirm the reset.

5The NF18MESH will reboot.

6After the NF18MESH has rebooted you will need to log in to the NF18MESH using the default

credentials printed on the sticker and re-enter your broadband connection settings such as your

ADSL/VDSL User ID and Password, etc. Please use the Quick Start Guide to set up your router.

6 of 6

NF18MESH –Restore Factory Default Settings Guide

FA01256 v1.0 23 June 2020

Manual Factory Reset

1Ensure the NF18MESH is powered on.

2On the back side of the NF18MESH, there is a small hole in the plastic with the word “Reset” printed

above it.

3This is the recessed reset button:

Back panel of NF18MESH showing Reset pinhole

4Insert the end of a paper clip or other rigid, thin piece of metal into the Reset pinhole and depress

and hold in for 10-12 seconds.

If this does not happen:

aDisconnect the power supply cable for 30 seconds and then reconnect it.

bThen depress the Reset button and hold in for 10-12 seconds.

5The NF18MESH is back to its factory defaults, you now need to reconfigure the broadband settings via

the user interface.

Note –If you had previously backed up your configuration, you can now restore your settings by uploading your .config file.

6To reconfigure the broadband settings:

aOpen a web browser (such as Internet Explorer, Google Chrome or Firefox), type

http://192.168.20.1 into the address bar and press Enter.

bAt the login screen, type the User Name and the Password as printed on the sticker and click

Altri manuali per NetComm CloudMesh NF18MESH

Indice

Altri manuali Casa Systems Hardware di rete

Casa Systems

Casa Systems NetComm CFS40 Manuale utente

Casa Systems

Casa Systems NDD-0315-01 Manuale utente

Casa Systems

Casa Systems Apex Enterprise Femto Manuale utente

Casa Systems

Casa Systems Pebble Manuale utente

Casa Systems

Casa Systems NDD-0305-01 Manuale utente

Casa Systems

Casa Systems NetComm CloudMesh NL19MESH Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente