Casio FX-9750GII - SOFTWARE VERSION 2-00 Manuale utente
Resetting the CASIO fx-9750GII for testing purposes
1. From the Main Menu, highlight the SYSTEM icon
and press lor press j.
2. Press y(RSET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select w(MAIN) to reset the main memories, for
testing purposes.
4. Press q(Yes) to reset the memory on the
calculator.
5. Press dwhen the calculator is complete.
6. To return to the Main Menu, press p.
Resetting the CASIO fx-9860GII for testing purposes
This will delete all RAM, Archive Memory, Programs, List and Spreadsheet Data
(resetting the calculator to factory default), which meets the reset requirements for
standardized testing.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press
y(RSET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select w(MAIN) to reset the main memories.
4. Press q(Yes) to reset the memory on the
calculator.
5. Press dwhen the calculator is complete.
6. To return to the Main Menu, press p.
To Disable Add-in Applications, if necessary:
This will disable the Geometry functionality.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press
y(RESET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select e(Add-In) to disable Add-In Applications.
Select r(STRGMEM) to delete storage memory
data.
Select y(A&S) to disable Add-In Applications
and delete storage memory data.
To Restore Add-in Applications, Programs and List and Spreadsheet Data:
1. Using an I/O unit-to-unit cable (which comes with the fx-9860GII models),
connect together the two graphing calculators- at least one of the two units
must be “temporarily disabled”.
2. On both calculators, from the Main Menu, highlight
the LINK icon and press lor press j.
3. Press r(CABLE) to select the type of cable.
4. Select w(3PIN) as the cable type.
5. On the receiving calculator, press w(RECV) to
set up the calculator to receive data.
The calculator is now ready to receive data.
6. On the sending calculator, press q(TRANSMIT) to
set up the calculator to transmit data.
Press q(MAIN) to send data from the Main
Memory.
Press q(SELECT) to select what data to send.
Press q(SELECT) to select specific data to send.
Press w(ALL) to select all data.
Once the data has been selected, press
u(TRANSMIT) to transmit the selected data.
Press q(Yes) to transmit the data.
Resetting the CASIO PRIZM/fx-CG10 for testing purposes
This will delete all RAM, Archive Memory, Programs, List and Spreadsheet Data
(resetting the calculator to factory default), which meets the reset requirements for
standardized testing.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press
y(RESET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select w(MAIN) to reset the main memories.
4. Press q(Yes) to reset the memory on the
calculator.
5. Press
dwhen the calculator is complete.
6. To return to the Main Menu, press p.
To Disable Add-in Applications, if necessary:
This will disable the Geometry and Picture Plot functionalities.
1. From the Main Menu, highlight the SYSTEM icon
and press lor press z.
2. Press y(RESET) to reset the memory. If your
screen does not match the one shown, press d
until it does.
3. Select e(Add-In) to disable Add-In Applications.
Select r(STRGMEM) to delete storage memory
data.
Select
y(A&S) to disable Add-In Applications
and delete storage memory data.
To Restore Add-in Applications, Programs and List and Spreadsheet Data:
1. Using an I/O unit-to-unit cable (which comes with the PRIZM/fx-CG10
models), connect together the two graphing calculators- at least one of the
two units must be “temporarily disabled”.
2. On both calculators, from the Main Menu, highlight
the LINK icon and press lor press j.
3. Press
r(CABLE) to select the type of cable.
4. Select
w(3PIN) as the cable type.
5. On the receiving calculator, press w(RECV) to
set up the calculator to receive data.
The calculator is now ready to receive data.
6. On the sending calculator, press q(TRANSMIT) to
set up the calculator to transmit data.
Press q(MAIN) to send data from the Main
Memory.
Press q(SELECT) to select what data to send.
Press q(SELECT) to select specific data to send.
Press w(ALL) to select all data.
Once the data has been selected, press
u(TRANSMIT) to transmit the selected data.
Press q(Yes) to transmit the data.
Altri manuali per FX-9750GII - SOFTWARE VERSION 2-00
7
Indice
Altri manuali Casio Calcolatrice
Casio
Casio fx-95MS Manuale utente
Casio
Casio fx-7400G PLUS Manuale di installazione e funzionamento
Casio
Casio fx-570ES Manuale utente
Casio
Casio FX-602P Manuale utente
Casio
Casio FX-P401 Manuale utente
Casio
Casio fx-82ZA PLUS Manuale utente
Casio
Casio fx-7300G Manuale utente
Casio
Casio fx-991ZA Plus Manuale utente
Casio
Casio CFX-9970G Manuale utente
Casio
Casio FX-85SA Manuale utente
Casio
Casio FX-9700GH Manuale utente
Casio
Casio MS-100BM Manuale utente
Casio
Casio fx-CG50 Manuale utente
Casio
Casio fx-82AU PLUS Manuale utente
Casio
Casio ClassPad 330 Manuale utente
Casio
Casio 2296 Manuale utente
Casio
Casio D-120S Manuale utente
Casio
Casio DR-T240TER Manuale utente
Casio
Casio fx-350MS Manuale di installazione e funzionamento
Casio
Casio HR-100TM Manuale utente
