Casio CTK-711EX Manuale utente

GM SOUND KEYBOARD

CTK-711EX

JUL.1998

CTK-711

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

2-WAY

BASS REFLEX SPEAKER

MODULATION

PITCH BEND

2-WAY

BASS REFLEX SPEAKER

232TONES

16 CHANNEL MIXER

TEMPO REGISTRATION

BANK A B C D E STORE

EXTERNAL CH1

UPPER1

INTERNAL

MIXER SELECT TONE EXPANDER ACCOMP SEQUENCERTRACK

DSP

CONTRAST

FREE

SESSION

ONETOUCH

PRESET

TONE

RHYTHM

LAYER/

AUTOHARMONIZE

SPLIT

CH2

UPPER2

CH3

LOWER1

CH4

LOWER2

CH5

ACCVOL.

CH6

CHORD1

CH7

CHORD2

CH8

CHORD3

CH9

BASS

CH10

RHYTHN

CH11

TR1

CH12

TR2

CH13

TR3

CH14

TR4

CH15

TR5

CH16

TR6

10DSP

ENVELOPE

CURSOR

SYNTH

DELETE

/NO /YES DISK

ENTER

TOUCH

RESPONSE

TRANSPOSE/

TUNE/MIDI

PITCH

ENVELOPE

MAIN MENU/

CHANNELVOLUME

SUB MENU/

CHANNEL SELECT

00 FLAT

01-17VIBRATO

AMP

ENVELOPE

PARAMETERRESET

DECAY

ENTER

SUSTAIN

18-45 OTHERS

DEMO

110 RHYTHMS

POWER MODE

SEQUENCER

FULL RANGE

CHORD

USER RHYTHM

100

‘

109

FINGERED

SONG

INTRO NORMAL/

FILL-IN VARIATION/

FILL-IN SYNCHRO/

ENDING START/

STOP

PATTERN

CASIO CHORD

VOLUME

MAX

MIN

RECORD

INDEX

— 1 —

CONTENTS

Safety Notice ----------------------------------------------------------------------------------------------- 2

Specifications---------------------------------------------------------------------------------------------- 3

Important Operation ------------------------------------------------------------------------------------- 5

Block Diagram --------------------------------------------------------------------------------------------- 6

Circuit Description --------------------------------------------------------------------------------------- 7

Diagnostic Program------------------------------------------------------------------------------------ 20

Major Waveforms --------------------------------------------------------------------------------------- 25

Printed Circuit Board ---------------------------------------------------------------------------------- 26

Exploded View ------------------------------------------------------------------------------------------- 28

Parts List--------------------------------------------------------------------------------------------------- 29

Schematic Diagrams----------------------------------------------------------------------------------- 31

— 2 —

SAFETY NOTICE

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type.

ADVARSE!

Lithiumbatteri. Eksplosionsfare ved fejlagtig handtering.

Udskiftning ma kun ske med batteri af samme fabrikat og type.

Lever det brugte batteri tilbage tili leverandoren.

VAROITUS

Paristo voiäjähtää, jos se on virheellisesti asennettu. Vaihda

paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä

käytetty paristo valmistajan ohjeiden mukaisesti.

VARNING

Felaktigt batteribyte kan medf fara för explosion. Använd där-

för endast samma typ eller likvärdig typ enligt apparat-

tillverkarens rekommendation.

Kassera förbrukade batterier enligt tillverkarens anvisning.

DENMARK:

FINLAND:

SWEDEN:

— 3 —

SPECIFICATIONS

GENERAL

Keyboard: 61 standard-size keys, 5 octaves (with touch response on/off; ExLight/

Light/Normal/Heavy touch)

Tones: 232 (128 General MIDI, 64 variation, 8 drum, 32 user); with layer and

split

Rhythm instrument tones: 53

Polyphony: 32 notes maximum (16 for certain tones)

Digital effects: 10 (REVERB 1, 2, 3; CHORUS; TREMOLO; PHASE SHIFTER; OR-

GAN SPEAKER; ENHANCER; FLANGER; EQ LOUDNESS)

Auto accompaniment

Rhythm patterns: 110 (100 + 10 user rhythms)

Tempo: Variable (226 steps, = 30 to 255)

Chords: 3 fingering methods (CASIO CHORD, FINGERED, FULL RANGE

CHORD)

Rhythm controller: Start/Stop, Intro, Normal/Normal Fill-In, Variation/Variation Fill-In,

Synchro/Ending

Accomp volume: 0 to 127 (128 steps)

One touch presets: Recalls settings for tone, tempo, layer, and Auto Harmonize in accor-

dance with rhythm.

Auto harmonize: Automatic addition of notes that harmonize with melody note in ac-

cordance with specified Auto Accompaniment chords.

Free session

Number of patterns: 100 (Auto Accompaniment function based on preset chord progres-

sions.)

Song sequencer

Songs: 2

Recording tracks: 6 (2 through 6 are melody tracks)

Recording method: Real-time

Memory capacity

(total for two songs): Approximately 4,500 notes

Punch in: Supported

Pattern sequencer

Number of patterns: 10 (Rhythm numbers 100 to 109)

Memory capacity: Approximately 4,700 notes

Elements: Intro, Normal, Variation, Normal Fill-In, Variation Fill-In, Ending

Parts: Chord 1, 2, 3; Bass; Rhythm

Recording method: Real-time

Registration memory

Number of setups: 20 (5 setups ×4 banks)

Memory contents: Tone, Rhythm, Tempo, Split on/off, Split point, Layer on/off,Auto Har-

monize on/off, Mixer settings, Keyboard channel on/off, DSP (digital

effect) on/off, DSP (digital effect) settings, Accompaniment mode,

Touch Response settings, Assignable jack setting, Transpose, Tun-

ing, Pitch Bend range, Sound range shift on/off

Demo tunes: 2

Synthesizer

Parameters: PCM set, amp envelope set, attack rate, release rate, pitch envelope

set, pitch, level, touch sensitivity, pan, filter sensitivity, filter level, trans-

pose

MixerChannels: 16

Modes: Internal, External, External/Solo, External/Play

Parameters: Program change number, volume, expression, pan, coarse tuning,

fine tuning, Effect Send

MIDI: 16-channel multi-timbre receive, General MIDI Level 1

— 4 —

Other functions

Pitch bend range: Adjustable (12 semitones upwards and downwards)

Modulation: Equipped

Transpose: 25 steps (–12 semitones to +12 semitones)

Tuning: Adjustable (A4 = approximately 440Hz ±50 cents)

Terminals

MIDI terminal: IN, OUT

Sustain/Assignable jack: Standard jack (sustain, sostenuto, soft, rhythm start/stop)

Headphones/Output: Stereo standard jack

Output Impedance: 250 Ω

Output Voltage: 5 V (RMS) MAX

12 V DC

Power supply: Dual power supply system

Batteries Six D-size batteries

Battery life Approximately 3 hours continuous operation on alkaline batteries

AC adapter: AD-12

Auto power off: Turns power off approximately six minutes after last key operation. En-

abled under battery power only, can be disabled manually.

Speaker output: 5 W + 5 W

Power consumption: 12 V 18 W

Dimensions: 109.2 ×42.7 ×15.7 cm (43 1/16 ×16 13/16 ×6 3/16 inch)

Weight (without batteries): Approximately 8.8 kg (19.4 lbs)

Standard accessories: Music Stand; Keyboard User’s Guide

ELECTRICAL

Current drain with 12 V DC:

No sound output 440 mA ±20 %

Maximum volume 2000 mA ±20 %

with 10 keys from C3 to E4 pressed in whistle tone

Volume: MAX., Velocity: MAX.

DSP0: Reverb1, FDD: Replay

Phone output level (Vrms with 8 Ωload each channel):

with tone Synth-Bass 4 tone L-ch (Key C4) 108 mV ±20 %

Volume: MAX., Velocity: MAX. R-ch (Key F3) 102 mV ±20 %

DSP0: Reverb1

Speaker output level (Vrms with 8 Ωload each channel):

with tone Synth-Bass 4 tone L-ch (Key D3) 7.2 mV ±20 %

Volume: MAX., Velocity: MAX. R-ch (Key F3) 6.3 mV ±20 %

DSP0: Reverb1

Output level (Vrms with 47 kΩload each channel):

with tone Synth-Bass 4 tone L-ch (Key C4) 3600 mV ±20 %

Volume: MAX., Velocity: MAX. R-ch (Key F3) 3200 mV ±20 %

DSP0: Reverb1

Minimum operating voltage: 6.1 V

— 5 —

IMPORTANT OPERATION

Full Initialization

Use this procedure to return all keyboard settings to what they were when you purchased it. Note that this

procedure clears all data from memory.

• While holding down the ENTER button, turn on keyboard power.

• Press YES to initialize the keyboard or NO to turn on power without changing any settings.

Parameter Initialization

Use this procedure to return all keyboard settings to what they were when you purchased it. Note that this

procedure does not affect user tones, user rhythms, registration memory contents, and display contrast

settings.

• While keyboard power is on, press the [+], [–], and ENTER buttons at the same time.

Adjusting Display Contrast

• Display contrast can be adjust to one of 100 levels for easy viewing.

• Adjusting display contrast helps to make figures easier to read from any viewing angle.

• Within five seconds after pressing the CONTRAST button, press [+] to increase the contrast value (mak-

ing the display darker) or [–] to decrease it (making the display lighter).

• After you release CONTRAST, the message “Contrast” remains on the display for a few moments, during

which you can change the contrast setting further using [+] and [–] or by inputting a contrast value with the

number keys.

The contrast can be set to a value from 0 to 99. The initial default setting is 50.

GM (General MIDI):

General MIDI standardizes MIDI data to play music with same nuance between different MIDI instruments.

Among GM conformed MIDI instruments, or commercially available musical data, music can be played with

similar tones.

SMF (Standard MIDI File):

SMF is a standard file format for MIDI instruments and computer music software. SMF formatted data can

be played and transported easily among SMF complied instruments or musical data of different manufac-

turers.

Reset?

— 6 —

BLOCK DIAGRAM

ROM2

MSM23C3210MC

-12CA89

LSI3 (32Mbit)

ROM1

MSM27C802CZ-463

LSI2 (8Mbit)

RAM1

TC551001BFL-70L

LSI8 (1Mbit)

VBR

VBRAVDDDVDDCVDDVCCVDDVC

VDD

APO

NMI

SWCK

LSDT

IC1

S1 HWR, RD

RD, HWR,

LWR

RD, HWR,

LWR

1RD, 1HWR, 1LWR

A0 ~ A15

KI0 ~ KI7

KC0 ~ KC8

SEG1 ~ SEG40

OUT

MIDI

COM1 ~ COM16

LEDA ~ LEDF

LEDCK, LEDCL

D0 ~ D15

D15

Chip Selector

TC74HC08

IC4

S-Register

TC74HC164

IC302

S-Register

TC74HC164

IC301

Back Light

LCD

Back up

Power

CR2032

Power Supply Circuit

Q203, Q204, Q207,

Q208, Q212, Q213

Q205,

Q206

CPU

HD6473042F16-463

LSI9

Working

RAM

TC55257

GFL-70L

LSI5

(256Kbit)

LPF

(L) LPF

(R)

D8 ~ D15 RESET

RD,

HWR

ECEB, EOEB

EWEB

RESB

PBO

LCD Driver

SED1278F2A

LSI501

DB4

~DB7

CONT,

LRS,

LR/W

Keyboard

SI0 ~

SI7

FI0 ~

FI7

KC0

KC7

WOK1

SOLP

BOK

Key Controller

TC190C020AF-001

LSI10

Reset IC

RN5VD40A

IC3

Out put

(L) (R)

Speakers

Back Light Driver

NT-07

Q501, Q502

LEDs

VDD

Buttons

A1 ~ A4

D0 ~ D15

RA0 ~ RA20

ED0 ~ ED8

EA0 ~ EA14

RD0 ~ RD15

Main

Volume

D/A Converter

µPD6376GS

LSI1

Power Amp.

LA4620

IC201

DSP

HG51B155FD

LSI4

A0 ~ A3

— 7 —

KC0 KC1 KC2 KC3 KC4 KC5 KC6 KC7

FI0 C2 1C#2 1D2 1D#2 1E2 1F2 1F#2 1G2 1

SI0 C2 2C#2 2D2 2D#2 2E2 2F2 2F#2 2G2 2

FI1 G#2 1A2 1A#2 1B2 1C3 1C#3 1D3 1D#3 1

SI1 G#2 2A2 2A#2 2B2 2C3 2C#3 2D3 2D#3 2

FI2 E3 1F3 1F#3 1G3 1G#3 1A3 1A#3 1B3 1

SI2 E3 2F3 2F#3 2G3 2G#3 2A3 2A#3 2B3 2

FI3 C4 1C#4 1D4 1D#4 1E4 1F4 1F#4 1G4 1

SI3 C4 2C#4 2D4 2D#4 2E4 2F4 2F#4 2G4 2

FI4 G#4 1A4 1A#4 1B4 1C5 1C#5 1D5 1D#5 1

SI4 G#4 2A4 2A#4 2B4 2C5 2C#5 2D5 2D#5 2

FI5 E5 1F5 1F#5 1G5 1G#5 1A5 1A#5 1B5 1

SI5 E5 2F5 2F#5 2G5 2G#5 2A5 2A#5 2B5 2

FI6 C6 1C#6 1D6 1D#6 1E6 1F6 1F#6 1G6 1

SI6 C6 2C#6 2D6 2D#6 2E6 2F6 2F#6 2G6 2

FI7 G#6 1A6 1A#6 1B6 1C7 1

SI7 G#6 2A6 2A#6 2B6 2C7 2

CIRCUIT DESCRIPTION

KEY MATRIX

Note: Each key has two contacts, the first conatct 1and second contact 2.

Key

Second contact 2 First contact 1 FI

NOMENCLATURE OF KEYS

F#3 G#3 A#3 C#4 D#4 F#4 G#4 A#4 C#5 D#5 F#5 G#5 A#5

F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6

D#3

C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 B6A6G6F6E6D6 C7

C#3A#2G#2

F#2D#2

C#2 A#6

G#6F#6D#6

C#6

— 8 —

KI0 KI1 KI2 KI3 KI4 KI5 KI6 KI7

KC0 MODE INTRO CH8 A CH16 SPLIT

KC1 RECORD CH1 CH9 B E 2

KC2 SONG CH2 CH10 C H RHYTHM 5

KC3 PATTERN CH3 CH11 D ENTER TONE 8

KC4 DSP CH4 CH12 E 0

KC5 CH5 CH13 STORE MIDI 1 3

KC6 CH6 CH14 G 4 6

KC7 BANK CH7 CH15 F SYNTH 7 9

BUTTON MATRIX

LED-B

FINGERD

LED-A

FULL RANGE

CHORD

LED MATRIX

LED-C

CASIO CHORD

LED-E

SYNTH

LED-D

FREE

SESSION

CON-

TRAST

FREE

SESSION

ONE TOUCH

PRESET

NORMAL/

FILL-IN

VARIATION/

FILL-IN

SYNCHRO/

ENDING

START/

STOP

TEMPO

MIXER

SELECT

TOUCH

RESPONSE

TRANS-

POSE

LAYER/

AUTO HARMO

H/NO

—

G/YES

DMSW DEMO

LED-F

TOUCH

RESPONSE

LED-H

SONG

LED-G

PATTERN

— 9 —

VDD Battery set

RESET

CPU

HD6473042F16-463

LSI9

Power Supply

Circuit

DSP

HG51B155FD

LSI4

RESB

Key Controller

TC190C020AF-001

LSI10

DVDD

VDD

RESET

APO

PWSW

From power switch

RES

NMI

PB0

PA7

RESET

PW/SW ON

APO

DVDD

(5V)

MEMORY DEVICES

Each memory device has the following data.

1RAM1 :

S-RAM for operation program, Register, Pattern and

Song. (Upper part of data bus)

2Internal ROM of CPU :

Main program data for system operation

3Internal RAM of CPU :

Work area for system operation

4ROM1 :

Demo, Accompaniment data, Song, Pattern, Synth mode

5ROM2 :

Sound Waveforms/Tone data Digital sound effect

6Working RAM :

Work area for DSP

Initial reset

When batteries are set or anAC adapter is connected, the reset IC provides a low pulse to the CPU.

When the power switch is pressed, the CPU receives a low pulse of POWER signal. The CPU first raises

APO signal to +5 V to generate DVDD voltage, then raises RESET signal to +5 V. During this period the

DSP and the key controller LSI initialize their internal circuits.

RESET CIRCUIT

CPU

ROM

RAM

512 kbit

16 kbit

DSP

LSI9

LSI4

Working RAM

256 kbit

LSI5

Internal Memory

ROM1

8 Mbit

LSI2

RAM1

1 Mbit

LSI8

ROM2

32 Mbit

LSI3

Altri manuali per CTK-711EX

Indice

Altri manuali Casio Tastiera elettronica

Manuali Tastiera elettronica popolari di altre marche

Yamaha

Yamaha PortaTone PSR-225GM Manuale utente

Behringer

Behringer U-CONTROL UMX49 Manuale utente

Yamaha

Yamaha Portatone X2500 Manuale utente

Yamaha

Yamaha Portatone PSR-100 Manuale utente

Keith McMillen Instruments

Keith McMillen Instruments K-Board Pro 4 Scheda tecnica

Yamaha

Yamaha PortaSound PCS-30 Manuale utente

Roland

Roland Juno-6 Manuale utente

McGrey

McGrey 6170 Manuale utente

Yamaha

Yamaha PortaTone PSR-41 Manuale utente

HDC

HDC Kurzweil KP300X Manuale utente

Akai

Akai MPK88 Manuale utente

Waldorf

Waldorf IRIDIUM Manuale utente

Yamaha

Yamaha NP-30 Istruzioni per il montaggio

Yamaha

Yamaha Portatone PSR-38 Manuale utente

Yamaha

Yamaha PortaTone PSR-40 Manuale utente

Behringer

Behringer MOTÖR 61 Manuale utente

Yamaha

Yamaha PortaTone PSR-62 Manuale utente

Yamaha

Yamaha PS-20 Manuale utente