Casio SF-3990 Manuale utente

User’s Guide

SF-3990

RCA500238-1

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT

IN THE U.S.A. (not applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.These limits

are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harm-

ful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modification to the product not expressly approved

by CASIO could void the user’s authority to operate the product.

E-1

English

Congratulations on your selection of this CASIO product! Be sure to keep

this manual in a safe place for future reference when necessary.

E-2

Contents

Read this first! ........................................................................................ E-3

Timekeeping Function ............................................................................ E-5

Alarm Function ....................................................................................... E-8

Inputting Characters .............................................................................. E-9

Recalling Data ..................................................................................... E-15

Editing Data ......................................................................................... E-15

Secret Memory Area ............................................................................ E-16

Conversion Mode ................................................................................. E-17

Memory Capacity Screen .................................................................... E-21

Calculator Mode ................................................................................... E-22

About the Power Supply ...................................................................... E-23

Messages ............................................................................................ E-25

World Time City Table .......................................................................... E-26

Storage Capacity ................................................................................. E-27

Specifications ....................................................................................... E-27

E-3

Read this first!

Before using the unit for the first time

Use the following procedure to load batteries and reset the unit before using

it for the first time.

1. Slide the battery compartment cover in the direction indicated by the arrow.

2. Slide the battery switch to the “REPLACE 1” setting.

3. Load the new battery into the battery compartment, making sure that the

positive (+) side of the new battery is facing up (so you can see it).

4. Slide the battery switch to the “REPLACE 2” setting and repeat step 3

for the other battery.

•Be sure to load two new CR2032 batteries only. Never mix an old battery

with a new one.

5. Slide the battery switch to the “LOCK” setting.

E-4

6. Press the RESET button. “RESET? Y/N”appears on the display.

The reset message appears in one of the six languages shown below.

RESET Message

ENGLISH RESET? Y/N START? Y/N

GERMAN RÜCKST.? J/N START? Y/N

FRENCH REINIT? O/N COMMENC? O/N

ITALIAN AZZER? S/N INIZI? S/N

SPANISH ¿REP.? S/N ¿INICIO? S/N

PORTUGUESE REPOSIC? S/N COMEÇA? S/N

7. Use Hor Jto select “Y”and then press ENTER. This causes “START?

Y/N”to appear on the display.

8. Use Hor Jto select “Y”and then press ENTER.

••

•Initial settings after RESET

Home Time Zone: New York (NYC)

Home Time: 12:00 AM, January 1, 2002

World Time 1: London (LON)

World Time 2: Tokyo (TYO)

12/24-Hour Setting: 12-hour

9. Replace the battery compartment cover.

Keep written copies of important data.

CASIO COMPUTER CO., LTD.assumes no responsibility for any damage or

loss caused by deletion of data as a result of malfunction, repairs, or re-

moval of both batteries.

Important Precautions

•Keep away from direct flame.

•Keep away from heat: direct sunlight, near heaters, etc.

•Never try to disassemble the unit.

•Clean exterior only with a soft cloth moistened in a weak solution of a mild

neutral detergent and water.

•Items described in this manual are subject to change without notice.

•CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or

claims by third parties which may arise from the use of this product.

E-5

About the Low Battery Message

Replace the batteries as soon as possible after the “LOW BAT!”message

appears. Pressing ON after replacing batteries causes the Home Time screen

to appear. Set the current time and date you want.

•When battery power is low, the “LOW BAT!”message will appear after you

press ON,OFF, TEL, SCHEDULE, ANNIVERSARY,MEMO,TO DO,

CLOCK, CONVERSION, or CAL. If you continue to operate the unit with-

out battery replacement, power will switch off automatically.

•The Daily Alarm, Schedule Alarm will not operate while battery power is low.

To adjust display contrast

1. Press FUNC to select CONTRAST, and then press ENTER.

2. Press J to increase contrast (making the figures on the display darker)

or Hto decrease it (making the figures lighter).

3. Press TEL, SCHEDULE,ANNIVERSARY, MEMO, TO DO, CLOCK, CON-

VERSION, CAL, or ESC.

To select the system language (English, French, Spanish,

German, Italian, Portuguese)

1. Press TEL to enter the Telephone Directory Mode.

2. Press FUNC to select LANGUAGE, and then press ENTER.

3. Use Kor Lto select a language. Press ENTER when the language

you want to use is displayed.

Timekeeping Function

Each press of CLOCK changes between the Home Time, World Time 1,

World Time 2, and Alarm.

To change the World Time city

Use CLOCK to display theWorld Time and press FUNC to select TIMEZONE.

Then press ENTER and use Kand Lto scroll through the cities.

74-1

111300

Press ENTER when the city you want to use is displayed.

AM/PM indicator

City Code Day of the week

Date

Month

Year

Time(HH-MM SS)

E-6

To set the Home Time city

Example

City: HKG (Hong Kong)

Key Operation Display

CLOCK

FUNC ENTER

•Select TIMEZONE.

K/L

•Scroll through city names until HKG

appears.

ENTER

To set the Home Time

040-1

1300

Example

Date: 2003-11-17 (November 17, 2003);Time: 9:45 AM

Key Operation Display

CLOCK

1300

0-1

1300

0-1

1300

AM/PM indicator

Day of the week

Date

Time(HH-MM SS)

Month

Year

0-1

1300

E-7

Key Operation Display

EDIT

20031117 AM/PM 0945

•Each press of AM/PM toggles between

AM (A) and PM (P). AM is indicated on the

display by “A”, while PM is indicated by “P”.

ENTER

•This resets the seconds to 00.

•Be sure to input leading zeros when necessary.

•Use the following to specify noon and midnight.

Noon Midnight

12-hour format 12 PM 12 AM

24-hour format 12 00

To switch between Standard Time and Daylight Saving Time

Press DST while your Home Time or the World Time is displayed to toggle

between Standard Time and Daylight Saving Time.

•You must make separate settings for Home Time and World Time.

014-01

111300

To switch between 12-hour and 24-hour format

1. Display the Home Time or the World Time.

2. Press 12/24 to change between 12-hour and 24-hour timekeeping.

004-9

111300

DST indicator

010300

4-90

111300--

E-8

Alarm Function

•The alarm sounds for 20 seconds when the alarm time is reached.

•To stop the alarm when it is sounding, press any key.

To set the alarm time

Example

8:05 PM

Key Operation Display

CLOCK CLOCK CLOCK

EDIT

0805 AM/PM

•Each press of AM/PM toggles between

AM (A) and PM (P). AM is indicated on

the display by “A”, while PM is indicated

by “P”.

ENTER

This causes the alarm indicator to appear.

Current alarm time

setting

Alarm ON/OFF indicator

MIT

0-80

0-8

Indice

Altri manuali Casio Organizzatore

Manuali Organizzatore popolari di altre marche

Palm

Palm IIIc Manuale utente

Sharp

Sharp YO190 Operation Manuale utente

Sanyo

Sanyo PJ-Net Manuale utente

Sharp

Sharp ZQ-P10 Manuale utente

Sharp

Sharp EL-6051 Manuale utente

GAMING TRUNK

GAMING TRUNK ROOT WOODLAND Manuale utente

3Com

3Com III Manuale utente

Twoey inside

Twoey inside 1210 Manuale utente

Rolodex

Rolodex RF-2064 Manuale utente

Classic Accessories

Classic Accessories Fairway Golf Cart Organizer Manuale utente

Sharp

Sharp EL-6990 Manuale utente

Amazon

Amazon B07HN1BRGK Manuale utente

OttLite

OttLite A03G5T Manuale utente

LOBA

LOBA AT HOME Manuale utente

Folded Space

Folded Space FS-SCY Manuale utente

Sharp

Sharp Wizard OZ-290H Manuale utente

Thule

Thule 302510 Manuale utente

Rolodex

Rolodex RF-512a Manuale utente