Casio 5338 Manuale utente

Operation Guide 5338

MA1304-EA

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

E-2

About This Manual

 Depending on the model of your watch, display text

appears either as dark ﬁ gures on a light background, or

light ﬁ gures on a dark background. All sample displays

in this manual are shown using dark ﬁ gures on a light

background.

 Button operations are indicated using the letters shown in

the illustration.

 Note that the product illustrations in this manual are

intended for reference only, and so the actual product may

appear somewhat different than depicted by an illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-12) to conﬁ gure

your Home City and daylight saving time settings.

Important!

 Proper World Time Mode data depend on correct Home City, time, and date

settings in the Timekeeping Mode. Make sure you configure these settings

correctly.

2. Set the current time.

 See “Adjusting the Digital Time and Date Settings” (page E-15).

The watch is now ready for use.

E-4

Contents

E-2 About This Manual

E-3 Things to check before using the watch

E-7 Mode Reference Guide

E-11 Timekeeping

E-12 Conﬁ guring Home City Settings

E-12 To conﬁ gure Home City settings

E-14 To change the Daylight Saving Time (summer time) setting

E-15 Adjusting the Digital Time and Date Settings

E-15 To conﬁ gure the digital time and date settings

E-19 Checking the Current Time in a Different Time Zone

E-19 To enter the World Time Mode

E-19 To view the time in another time zone

E-5

E-20 To specify standard time or daylight saving time (DST) for a city

E-21 Using the Alarm

E-22 To enter the Alarm Mode

E-22 To set an alarm time

E-23 To test the alarm

E-24 To turn an alarm and the Hourly Time Signal on and off

E-24 To stop the alarm

E-25 Using the Stopwatch

E-25 To enter the Stopwatch Mode

E-26 To perform an elapsed time operation

E-26 To pause at a split time

E-26 To measure two ﬁ nishes

E-28 Countdown Timer

E-28 To enter the Countdown Timer Mode

E-29 To conﬁ gure the countdown timer

E-6

E-30 To perform a countdown timer operation

E-30 To stop the alarm

E-31 Adjusting the Analog Hand Setting

E-31 To adjust the analog time

E-33 Illumination

E-33 To turn on illumination

E-34 Button Operation Tone

E-34 To turn the button operation tone on and off

E-35 Troubleshooting

E-36 Main Indicators

E-38 Speciﬁ cations

E-7

Mode Reference Guide

Your watch has 5 “modes”. The mode you should select depends on what you

want to do.

To do this: Enter this mode: See:

 View the current date in the Home City

 Conﬁ gure Home City and daylight saving time (DST)

settings

 Conﬁ gure time and date settings

 Select 12-hour or 24-hour timekeeping

 Adjust the analog hands

Timekeeping Mode E-11

View the current time in one of 48 cities

(29 time zones) around the globe World Time Mode E-19

Set an alarm time Alarm Mode E-21

Use the stopwatch to measure elapsed time Stopwatch Mode E-25

Use the countdown timer Countdown Timer Mode E-28

E-8

Selecting a Mode

 Press C to cycle between the modes as shown below.

Timekeeping Mode World Time Mode

E-9

Stopwatch Mode Countdown Timer Mode Alarm Mode

 In any mode (except when a setting mode, with ﬂ ashing digits is on the display),

press B to illuminate the display.

Operation Guide 5338

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the

modes.

Auto Return Features

If you leave a setting mode with ﬂ ashing digits on the display for two or three

minutes without performing any operation, the watch exits the setting mode

automatically.

Initial Screens

When you enter the World Time Mode or Alarm Mode, the data you were viewing

when you last exited the mode appears ﬁ rst.

Scrolling

The B and D buttons are used on the setting mode to scroll through data on the

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

E-11

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

 Each press of D toggles the digital display between the two formats shown

nearby.

Hour

Day of the week

Hour : Minutes

Minutes

Seconds

Month-Day PM indicator

Seconds

Day

E-12

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A for about two

seconds until the seconds start to ﬂ ash. This is the

setting mode.

 The watch will exit the setting mode automatically if

you do not perform any operation for about two or

three minutes.

Seconds

E-13

2. Press C twice to move the ﬂ ashing to the city code.

 For details about city codes, see the “City Code

Table” at the back of this manual.

3. Press D (East) and B (West) to select the city code

you want to use as your Home City.

 Keep pressing D or B until the city code you want

to select as your Home City appears on the display.

4. After the setting is the way you want, press A to return

to the Timekeeping Mode.

Note

 After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current time

in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

City Code

E-14

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A for about two

seconds until the seconds start to ﬂ ash. This is the

setting mode.

2. Press C to display the DST setting mode.

3. Press D to toggle between Daylight Saving Time (ON)

and Standard Time (OFF).

4. After the setting is the way you want, press A to

return to the Timekeeping Mode.

 The DST indicator appears to indicate that Daylight

Saving Time is turned on.

DST indicator

E-15

Adjusting the Digital Time and Date Settings

Use the procedure below to adjust the digital time and date settings.

To conﬁ gure the digital time and date settings

1. In the Timekeeping Mode, hold down A for about two

seconds until the seconds start to ﬂ ash. This is the

setting mode.

Seconds

E-16

2. Press C to move the ﬂ ashing in the sequence shown below to select the other

settings.

Seconds

DST

Home City Code

Hour

Minutes

Day

Month

Year

12/24-Hour Format

 The following steps explain how to conﬁ gure timekeeping settings only.

E-17

3. When the timekeeping setting you want to change is ﬂ ashing, use D and/or B

to change it as described below.

Screen To do this: Do this:

Reset the seconds to 00 Press D.

Toggle between Daylight Saving Time (ON)

and Standard Time (OFF)Press D.

Change the city code Use D (East) and B (West).

Change the hour or minute Use D (+) and B (–).

Toggle between 12-hour (12H) and 24-hour

(24H) timekeeping Press D.

Change the year, month, or day Use D (+) and B (–).

4. Press A to exit the setting mode.

E-18

Note

 For information about selecting a Home City and conﬁ guring the DST setting, see

“Conﬁ guring Home City Settings” (page E-12).

 While 12-hour format is selected for timekeeping, a P(PM) indicator will appear

for times from noon to 11:59 p.m. No indicator appears for times from midnight to

11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any

P(PM) indicator.

 The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

 The day of the week changes automatically when the date changes.

E-19

Checking the Current Time in a Different Time Zone

You can use the World Time Mode to view the current

time in one of 29 time zones (48 cities) around the

globe. The city that is currently selected in the World

Time Mode is called the “World Time City”.

To enter the World Time Mode

Use C to select the World Time Mode as shown on

page E-8.

To view the time in another time zone

In the World Time Mode, use D (East) to scroll through

city codes.

Currently selected

World Time City

Current time in the currently

selected World Time City

Operation Guide 5338

E-20

To specify standard time or daylight saving time (DST) for a city

1. In the World Time Mode, use D (East) to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about two seconds.

 This toggles the city code you selected in step1

between Daylight Saving Time (DST indicator

displayed) and standard time (DST indicator not

displayed).

 You cannot use the World Time Mode to change the DST setting of the city

currently selected as your Home City in the Timekeeping Mode.

 Note that you cannot switch between standard time/daylight saving time (DST)

while UTC is selected as the World Time City.

 The standard time/daylight saving time (DST) setting affects only the currently

selected time zone. Other time zones are not affected.

DST indicator

E-21

Using the Alarm

You can set ﬁ ve independent daily alarms. When a

daily alarm is turned on, an alarm tone will sound

for about 20seconds each day when the time in the

Timekeeping Mode reaches the preset alarm time. One

of the alarms is a snooze alarm, while the other four

are one-time alarms. The snooze alarm operation will

repeat every ﬁ ve minutes, up to seven times.

You can also turn on an Hourly Time Signal, which will

cause the watch to beep twice every hour on the hour.

Alarm number

Alarm time (Hour : Minutes)

E-22

To enter the Alarm Mode

Use C to select the Alarm Mode as shown on page E-9.

 The snooze alarm screen is indicated by SNZ, while the other alarm screens are

numbered AL1 through AL4. The Hourly Time Signal screen is indicated by SIG.

 When you enter the Alarm Mode, the data you were viewing when you last exited

the mode appears ﬁ rst.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

AL1 AL3 SNZAL2 AL4 SIG

D D DD D

Alarm ON/OFF indicator

Alarm indicator

E-23

2. Hold down A for about two seconds until the alarm time starts to ﬂ ash. This is

the setting mode.

3. Press C to move the ﬂ ashing between the hour and minute settings.

4. While a setting is ﬂ ashing, use D (+) and B (–) to change it.

 When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting mode.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

E-24

To turn an alarm and the Hourly Time Signal on and off

In the Alarm Mode, use D to select an alarm or the

Hourly Time Signal.

 When the alarm you want or the Hourly Time Signal

is displayed, press A to toggle it between on (“ ”

displayed) and off (“ ” displayed).

 The alarm on indicator (when any alarm is on), snooze

alarm indicator (when the snooze alarm is on), and the

Hourly Time Signal on indicator (when the Hourly Time

Signal is on) are shown on the display in all modes.

To stop the alarm

Press any button.

Hourly time signal

on indicator

Snooze alarm indicator

E-25

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two ﬁ nishes.

To enter the Stopwatch Mode

Use C to select the Stopwatch Mode as shown on

page E-9.

1/100 Seconds

Split

Seconds

Hours

Minutes

E-26

To perform an elapsed time operation

DD D D A

Start Stop (Restart) (Stop) Reset

To pause at a split time

DA A D A

Start Split

(SPL displayed)

Split release Stop Reset

To measure two ﬁ nishes

DA D A A

Start Split

(SPL displayed)

First runner ﬁ nishes.

Display time of ﬁ rst

runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Reset

E-27

Note

 The Stopwatch Mode can indicate elapsed time up to 23hours, 59minutes,

59.99seconds.

 Once started, stopwatch timing continues until you press D to stop it, even if

you exit the Stopwatch Mode to another mode and even if timing reaches the

stopwatch limit deﬁ ned above.

 Exiting the Stopwatch Mode while a split time is frozen on the display clears the

split time and returns to elapsed time measurement.

E-28

Countdown Timer

The countdown timer can be set within a range of

one minute to 24hours. An alarm sounds when the

countdown reaches zero.

To enter the Countdown Timer Mode

Use C to select the Countdown Timer Mode as shown

on page E-9.

Seconds

MinutesHours

E-29

To conﬁ gure the countdown timer

1. While the countdown start time is on the display in

the Countdown Timer Mode, hold down A until the

current countdown start time starts to ﬂ ash, which

indicates the setting mode.

 If the countdown start time is not displayed, use the

procedure under “To perform a countdown timer

operation” (page E-30) to display it.

2. Press C to move the ﬂ ashing in the sequence shown

below to select other settings.

Start Time (hours) Start Time (minutes)

Operation Guide 5338

E-30

3. Use D (+) and B (–) to change the hours and minutes settings.

 To count down from 24hours, set a start time of 0:00.

4. Press A to exit the setting mode.

To perform a countdown timer operation

DD D D A

Start Stop (Restart) (Stop) Reset

 Before starting a countdown timer operation, check to make sure that a

countdown operation is not in progress (indicated by the seconds counting down).

If it is, press D to stop it and then A to reset to the countdown start time.

To stop the alarm

Press any button.

E-31

Adjusting the Analog Hand Setting

Use the following procedure to adjust the analog hands so their settings match the

digital time.

To adjust the analog time

1. In the Timekeeping Mode, hold down D for about

three seconds until the current time start to ﬂ ash. This

is the analog setting mode.

2. Press D to advance the analog time setting by

20seconds.

 Holding down D advances the analog time setting

at high speed.

E-32

 If you need to advance the analog time setting a long way, hold down D until

the time starts advancing at high speed, and then press B. This locks the high-

speed hand movement, so you can release the two buttons. High-speed hand

movement continues until you press any button. It will also stop automatically

after the time advances 12hours or if an alarm (daily alarm, Hourly Time Signal,

or countdown beeper) starts to sound.

3. Press A to exit the setting mode.

 The watch will automatically adjust the minute hand slightly to match its internal

second count when you exit the setting mode.

E-33

Illumination

The face of the watch is illuminated for easy reading in

the dark.

To turn on illumination

In any mode (except when a setting mode, with ﬂ ashing

digits is on the display), press B to illuminate the display.

Illumination Precautions

 Illumination may be hard to see when viewed under

direct sunlight.

 Illumination turns off automatically whenever an alarm

sounds.

 Frequent use of illumination runs down the battery.

E-34

Button Operation Tone

The button operation tone sounds any time you press one

of the watch’s buttons. You can turn the button operation

tone on or off as desired.

 Even if you turn off the button operation tone, alarms,

the Hourly Time Signal, and other beepers all operate

normally.

To turn the button operation tone on and off

Hold down C until the button operation tone sounds

(about 3seconds).

 This will toggle the button operation tone either ON or

OFF.

 The mute indicator is displayed while the button

operation tone is turned off (muted).

 The mute indicator is displayed in all modes when the

button operation tone is turned off.

Mute indicator

E-35

Troubleshooting

Time Setting

■ The current time setting is off by hours.

Your Home City setting may be wrong (page E-12). Check your Home City setting and

correct it, if necessary.

■ The current time setting is off by one hour.

You may need to change your Home City’s standard time/daylight saving time

(DST) setting. Use the procedure under “Adjusting the Digital Time and Date

Settings” (page E-15) to change the standard time/daylight saving time (DST) setting.

World Time Mode

■ The time for my World Time City is off in the World Time Mode.

This could be due to incorrect switching between standard time and daylight saving

time. See “To specify standard time or daylight saving time (DST) for a city” (page E-20)

for more information.

E-36

Main Indicators

Number Name See

zSnooze alarm indicator E-24

xAlarm indicator E-22

cHourly time signal on indicator E-24

vPM indicator E-11

bMute indicator E-34

nSplit indicator E-25

mDST indicator E-14

,Graphic indicator –

6 5

B @

E-37

, Graphic indicator

Mode Indicator Meaning

Timekeeping

World Time

Alarm

Current second

Countdown Timer Timer seconds

Stopwatch Elapsed 1/10 seconds

E-38

Speciﬁ cations

Accuracy at normal temperature:

30 seconds a month

Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the

week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Home City code (can be assigned one of 48 city codes);

Standard Time/Daylight Saving Time (summer time)

Analog Timekeeping: Hour, minutes (hand moves every 20seconds)

World Time: 48 cities (29 time zones)

Other: Daylight Saving Time/Standard Time

Alarms: 5 daily alarms (with 1 snooze alarm); Hourly time signal

Stopwatch:

Measuring unit: 1/100 second

Measuring capacity: 23:59'59.99"

Measuring modes: Elapsed time, split time, two ﬁ nishes

E-39

Countdown Timer:

Measuring unit: 1 second

Countdown range: 24 hours

Countdown start time setting range: 1 minute to 24 hours (1-minute increments)

Illumination: LED (light-emitting diode)

Power Supply: Two silver oxide batteries (Type: SR726W)

Approximately 2 years on type SR726W (assuming alarm operation 20seconds

per day and one illumination operation 1.5seconds per day)

Frequent use of illumination runs down the battery.

Operation Guide 5338

L-1

City Code Table

L-2

City Code Table

City

Code City UTC Offset/

GMT Differential

PPG Pago Pago –11

HNL Honolulu –10

ANC Anchorage –9

YVR Vancouver –8

LAX Los Angeles

YEA Edmonton –7

DEN Denver

MEX Mexico City –6

CHI Chicago

MIA Miami

–5YTO Toronto

NYC New York

SCL Santiago –4

YHZ Halifax

YYT St. John’s –3.5

City

Code City UTC Offset/

GMT Differential

RIO Rio De Janeiro –3

RAI Praia –1

UTC

0LIS Lisbon

LON London

MAD Madrid

PAR Paris

ROM Rome

BER Berlin

STO Stockholm

ATH Athens

+2CAI Cairo

JRS Jerusalem

MOW* Moscow +3

JED Jeddah

THR Tehran +3.5

L-3

City

Code City UTC Offset/

GMT Differential

DXB Dubai +4

KBL Kabul +4.5

KHI Karachi +5

DEL Delhi +5.5

DAC Dhaka +6

RGN Yangon +6.5

BKK Bangkok +7

SIN Singapore

HKG Hong Kong

BJS Beijing

TPE Taipei

SEL Seoul +9

TYO Tokyo

ADL Adelaide +9.5

GUM Guam +10

SYD Sydney

NOU Noumea +11

WLG Wellington +12

* As of December 2012, the ofﬁ cial UTC

offset for Moscow, Russia (MOW) has

been changed from +3 to +4, but this

watch still uses an offset of +3 (the old

offset) for MOW. Because of this, you

should leave the summer time setting

turned on (which advances the time

by one hour) for the MOW time.

 This table shows the city codes of

this watch.

 The rules governing global times

(UTC offset and GMT differential) and

summer time are determined by each

individual country.

Indice

Manuali Orologio popolari di altre marche

Pandora

Pandora WATCH2 Manuale utente

Suunto

Suunto X6 Manuale utente

Seiko

Seiko N830 Manuale utente

MotionX

MotionX 365 Manuale utente

Garmin

Garmin VENU SQ 2 Manuale utente

QCY

QCY Watch GTC Manuale utente

Canyon

Canyon Cindy CNE-KW41WP Manuale utente

Esq

Esq Watches Guida all'installazione

Crane

Crane AA5-CDSM-3A Manuale utente

Timex

Timex W-214 Manuale utente

DETOMASO

DETOMASO MATERA Manuale utente

Geemarc

Geemarc Watch N Shake Manuale utente

LORUS

LORUS W590 Manuale utente

STENLILLE

STENLILLE Actío Manuale utente

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuale utente

Slazenger

Slazenger SLZ800 Manuale utente

iTOUCH

iTOUCH 3360 Manuale utente

Seiko

Seiko 4R57A Guida rapida