Cateye PADRONE DIGITAL Istruzioni operative
Troubleshooting
Measurement does not work
The PADRONE DIGITAL does not switch to the measurement screen.
What should I do?
• Is flashing on the PADRONE DIGITAL?
The PADRONE DIGITAL is connected to a smartphone.
Set [Connect] to [OFF] in the (Menu) of the smartphone (Cateye Cycling™) or close
Cateye Cycling™.
Why is the sensor signal not being received?
• If using a smartphone (Cateye Cycling™), is [Connect] set to [ON] in the (Menu)?
Set [Connect] to [OFF] or close Cateye Cycling™.
• Are you using another smartphone application that is connecting to the
Bluetooth® sensor?
The Bluetooth® sensor may be connected to the smartphone.
Bluetooth® sensors are only able to connect with a single device at a time.
Stop using all other apps or change the app settings so that it does not connect to
Bluetooth® sensors.
• Turn off Bluetooth® on your smartphone, as the sensor may be connected to the
smartphone.
Confirm that the sensor gets connected with the PADRONE DIGITAL.
It is recommended that Bluetooth® is turned off on your smartphone when the sensor
disconnects easily.
• Are you also using other wireless devices simultaneously (including other Bluetooth®
products)?
Stop using the devices simultaneously and confirm that the connection is restored.
• Press the RESET button on the sensor that cannot connect.
Confirm that the sensor gets connected with the PADRONE DIGITAL.
CATEYE PADRONE DIGITAL
1
Troubleshooting
Measurement does not work
Why is the sensor signal not being received? (Continued)
• Is the sensor paired with the unit?
The sensor must be paired with the PADRONE DIGITAL. Perform the pairing with the
PADRONE DIGITAL or with a smartphone (Cateye Cycling™).
Caution!: Pairing of a commercial sensor and the PADRONE DIGITAL
If using a commercial sensor with an iPhone, go back to (Menu), set [Connect] to
OFF and perform pairing with the PADRONE DIGITAL.
* When using an iPhone, you cannot sync settings of commercial sensors with the
PADRONE DIGITAL.
• Is the PADRONE DIGITAL or sensor battery flat?
* Battery performance diminishes in winter.
Replace the batteries with new ones.
If speed sensor signals or cadence sensor signals are not received
• Is the clearance between the sensor zone of the sensor and the magnet too large?
(The clearance must be within 3 mm.)
• Does the magnet pass through the sensor zone correctly?
Adjust the position of the magnet and/or the speed sensor.
If heart rate signals are not received
• The electrode pad may have slipped out of position.
Check that the electrode pad is still in close contact with your body.
• Your skin may be dry.
Wet the electrode pad a little.
• The electrode pad may have deteriorated or become damaged due to prolonged usage.
If this is the case, replace the attachment belt with a new one.
CATEYE PADRONE DIGITAL
2
Troubleshooting
Abnormal display
The display remains blank when the button is pressed.
Replace the PADRONE DIGITAL battery.
Incorrect data appear.
Press only the AC button on the back of the PADRONE DIGITAL to restart it.
The setting values will be maintained.
Why are measurement values flashing?
If using a Cateye sensor, measured values start flashing to indicate that there is little remaining
battery life in the relevant sensor.
Replace the battery for the relevant sensor.
Errors when using Cateye Cycling™ (Smartphone)
Cannot connect a paired PADRONE DIGITAL with a smartphone (Cateye Cycling™)
Restart Cateye Cycling™. If this does not resolve the issue, restart your smartphone.
(import button) to import summary data is not displayed in the Activity List
• Have you reset the PADRONE DIGITAL?
To import summary data using Cateye Cycling™, the PADRONE DIGITAL must be reset (MODE
pressed for longer than 2 seconds on any display other than Dst2).
• If the PADRONE DIGITAL was reset but (import button) is not displayed:
Measurements for trips of 0.1 km or less are not recorded as summary data.
Cannot upload data
• Have you setup the account for each service site?
From (Menu) in the smartphone app (Cateye Cycling™), tap [Account] and enter the
account information for each site.
• Cannot share on Facebook or Twitter
In Cateye Cycling™, tap (Menu) > [Account], and turn off Facebook and Twitter
temporarily, and then turn them back on to solve the problem.
CATEYE PADRONE DIGITAL
3
Indice
Altri manuali Cateye Accessori per biciclette
Cateye
Cateye STRADA CC-RD100N Manuale utente
Cateye
Cateye VELO8 Manuale utente
Cateye
Cateye PADRONE SMART Manuale utente
Cateye
Cateye ENDURO 2 Manuale utente
Cateye
Cateye VELO 5 Manuale utente
Cateye
Cateye MSC-2DX N Manuale operativo e di manutenzione
Cateye
Cateye CC-VT100W Manuale utente
Cateye
Cateye TL-LD120-F Manuale utente
Cateye
Cateye Stealth EVO+ CC-GL51 Manuale di istruzioni
Cateye
Cateye HL-1600 Manuale utente
Cateye
Cateye Velo Wireless + Manuale utente
Cateye
Cateye CC-AT200W Manuale utente
Cateye
Cateye CC-MC100W Manuale utente
Cateye
Cateye DOUBLE SHOT PRO Manuale utente
Cateye
Cateye CC-VL510 Manuale utente
Cateye
Cateye STRADA CC-RD100N Manuale utente
Cateye
Cateye GVOLT100 Manuale utente
Cateye
Cateye OS 1.1 Manuale utente
Cateye
Cateye CC-RS100W Guida alla risoluzione dei problemi
Cateye
Cateye STEALTH EVO Manuale utente
