CBT Supply Li'lBrig Manuale utente
Assembly Instructions for
For small form factor CPUs
4 Carbon Steel Bars
Li’l Brig
Mounting Bracket
Bottom Pan Top Pan with
Mounting
Slots
SecurityTabs
& Self-tapping
Screws 4 bar extensions - Li’l Brig
5 bar extensions - Brig
8Machine Screws & Wire Clip - Li’l Brig
10 Machine Screws & Wire Clip - Brig
Parts Identification ©2010 CBT Supply, Inc. All rights reserved
5 Carbon Steel Bars
Brig
1. Install Bars in
Bottom Pan
Place CPU on bottom pan
and determine locations for
bar installation. Choose the
closest clearance between
bars and CPU case. Use 4 of
the 8 black machine screws
provided.
The Brig uses 5 bars and
does not use a security tab.
3. Install Bars in Top Pan
With bars and security flanges installed, place CPU
on bottom pan. Front of CPU should be oriented with
curved flanges as shown. If CPU is taller than the bars,
screw in bar extensions. Use 4 remaining black ma-
chine screws to install top pan onto bars.
2. Install Security Tabs (Li’l Brig only)
Use self-tapping metals screws to install security tabs into holes
provided in the top and bottom pans at the back edge. This
operation requires slow, steady force. Once installed, screws are
difficult to remove. Several sets of holes are provided so you can
avoid cable routing conflicts. When the top is installed, the CPU
is trapped inside
©2010 CBT Supply, Inc. All rights reserved
4. Install Mounting
Bracket to Table
The mounting
bracket is designed to
integrate with the C-Leg
used in HorizonLine™ and
Pi™ table systems. It may
alsobe installed to the
under surface of any table
withsufficient clear space
for the CPU.
Use the bolts provided
withHorizonLine™ or Pi™
table legsto mount the
bracket using the common
plate holes.
If mounting to table
surface without C-leg
system, provide your own
screws or bolts appropri-
ate for table thickness.
5. Slide Onto Mounting Bracket
Slots onthetop panslide over studs onthe mounting
bracket. Slide the locking hole tab through the slot in the
mounting bracket.
Use the wire clip to interlock thebracket with the Li’l Brig™.
The wire clip, provided for this purpose, is easily re
-
moved. You may wish to use acable tie or your own
combination lock for added security.
©2010 CBT Supply, Inc. All rights reserved
©2010 CBT Supply, Inc. All rights reserved
CBT Supply, Inc.
800 770 7042
Products for the Net Generationsm
Indice
Altri manuali CBT Supply Scrivania
