CCTV PTA1318X Manuale utente

Solemn Declaration

While writing this manual, we’ve been very cautious and prudent in order to guar-

antee the credibility of all the information provided here. However, if there exists any

error, your precious advice and correction will be greatly appreciated. Meanwhile, the

misinterpretation of this manual is not controllable, so we are not responsible for the

accidents and the damage caused by misunderstanding this manual, the damage to the

third party and thereby the compensation claimed by the third party and the deletion

and loss of information and thereby other indirect loss caused by incorrect software op-

eration, maintenance or other accidental situations.

The distribution and marketing must be conducted by the original purchaser un-

der the items of permission agreement. No company or individual is allowed to copy or

duplicate the whole or part of this product, or convert it into other electronic media read-

able by other machines.

Any modification of the manual is not likely to be otherwise stated.

Please base on the software when any mismatch for this manual caused by soft-

ware upgrading occurs.

Please read the user’s manual carefully before using the product.

Make sure that your operation is complied with the operation procedure.

Please read the manual in detail before using the product!

Please obey all the rules of operation!

AUTO-TRACKING SPEED DOME

USER’S MANUAL

Speed Dome of Security & Safety of CCTV System

Contents

Part.1.Notice ...................................................................4

Part.2.Product Features...............................................4

Part.3.Function Description........................................5

Part.4.Technical Parameters.....................................7

Part.5.Installation Preparation.....................................8

Part.6.Installation Guidance....................................................8

1.Dome-Insert Installation ............................................................................. 8

2.Ceiling—mounted Installation.........................................................................9

3 . Wall-hung Installation................................................................... 10

4. Pillar Installation of Dome...................................................................................... 11

5.Lifting Installation of Dome...................................................................................... 12

6.Product Connection..................................................................................................... 12

Part.7. Menu Setting of OSD System............................13

1.English Menu Index......................................................................................... 13

2.Basic Operation........................................................................................ 14

3.Power-on and Self-check.......................................................................................... 15

4.Main Menu Description............................................................................................. 15

5.Restore Factory Settings....................................................................................16

6.Language&Video&Position Settings...................................................................................16

7.Date&Time Settings................................................................................. . 17

8.Menu Password Protection Settings....................................................................................18

9.Communication Settings....................................................................................... 19

10.System Other Settings………………………….................................……….. 20

11.Camera Settings................................................................................................... 21

1 2. Display Settings……........................................................................... 22

13.Dome Title Settings.......................................................................................23

14.Boot&Free Action Settings....................................................................................... 23

15.IR Set tin gs .. .. ..... ... ..... .. .. ... .. ... .. .. . .. .. ... ... .. .. .. ... ... .. ... .. .. ... .. ... .. .. . 24

16.Alarm Sett ings.. ......... .... ...... ... .......... ......... .... ...... ... ..... .... ......... .... .. 25

17.Privacy Masking Settings............................................................................................ 26

CCTV SYSTEM

Address

Code

Address Switch

Address

Code

Address Switch

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

195 1 1 0 0 0 0 1 1 226 0 1 0 0 0 1 1 1

196 0 0 1 0 0 0 1 1 227 1 1 0 0 0 1 1 1

197 1 0 1 0 0 0 1 1 228 0 0 1 0 0 1 1 1

198 0 1 1 0 0 0 1 1 229 1 0 1 0 0 1 1 1

199 1 1 1 0 0 0 1 1 230 0 1 1 0 0 1 1 1

200 0 0 0 1 0 0 1 1 231 1 1 1 0 0 1 1 1

201 1 0 0 1 0 0 1 1 232 0 0 0 1 0 1 1 1

202 0 1 0 1 0 0 1 1 233 1 0 0 1 0 1 1 1

203 1 1 0 1 0 0 1 1 234 0 1 0 1 0 1 1 1

204 0 0 1 1 0 0 1 1 235 1 1 0 1 0 1 1 1

205 1 0 1 1 0 0 1 1 236 0 0 1 1 0 1 1 1

206 0 1 1 1 0 0 1 1 237 1 0 1 1 0 1 1 1

207 1 1 1 1 0 0 1 1 238 0 1 1 1 0 1 1 1

208 0 0 0 0 1 0 1 1 239 1 1 1 1 0 1 1 1

209 1 0 0 0 1 0 1 1 240 0 0 0 0 1 1 1 1

210 0 1 0 0 1 0 1 1 241 1 0 0 0 1 1 1 1

211 1 1 0 0 1 0 1 1 242 0 1 0 0 1 1 1 1

212 0 0 1 0 1 0 1 1 243 1 1 0 0 1 1 1 1

213 1 0 1 0 1 0 1 1 244 0 0 1 0 1 1 1 1

214 0 1 1 0 1 0 1 1 245 1 0 1 0 1 1 1 1

215 1 1 1 0 1 0 1 1 246 0 1 1 0 1 1 1 1

216 0 0 0 1 1 0 1 1 247 1 1 1 0 1 1 1 1

217 1 0 0 1 1 0 1 1 248 0 0 0 1 1 1 1 1

218 0 1 0 1 1 0 1 1 249 1 0 0 1 1 1 1 1

219 1 1 0 1 1 0 1 1 250 0 1 0 1 1 1 1 1

220 0 0 1 1 1 0 1 1 251 1 1 0 1 1 1 1 1

221 1 0 1 1 1 0 1 1 252 0 0 1 1 1 1 1 1

222 0 1 1 1 1 0 1 1 253 1 0 1 1 1 1 1 1

223 1 1 1 1 1 0 1 1 254 0 1 1 1 1 1 1 1

224 0 0 0 0 0 1 1 1 255 1 1 1 1 1 1 1 1

225 1 0 0 0 0 1 1 1

18.Preset Settings....................................................................................................27

19.Auto Tour Settings....................................................................................................28

20.Limit Scan Settings....................................................................................................29

21.Pattern Scan Settings....................................................................................................30

22.Zone Indication Settings....................................................................................................31

23.Auto-tracking Settings....................................................................................................32

Part.8.Common functions operating Express .............33

1.Dome Function Express.................................................................................................33

2.Dome Controlling Function Express....................................................................................34

3.Camera Function Express.................................................................................................34

4.Auto-Tracking Function Express..........................................................................................35

5.IR Function Express.................................................................................................35

Part.9.Simple Trouble Shooting................................36

Part.10.Common Knowledge on RS485 Bus...…...........37

1. Basic.Features of RS485.Bus...............................................................................37

2.RS485 control bus transmitting distance........................................................................ 37

3.Connection Methods &Terminal Resistance...................................................... 37

4.Problems in Practical Use...........................................................................38

5. Wires Recommended........................................................................................... 38

Part.11.code Switch setting table …........................…..39

Part.12.Solemn Declaration …........................…..44

CCTV SYSTEM

Part 1 【Notice】

1.Handle with care while transportation.

Do not abuse the camera. Avoid pressing striking, shaking, etc. The camera could be damaged by improper

handling or storage.

2.How to deal with malfunction

If smoke or unusual smell comes out or malfunction occurs, SHUT DOWN the power, STOP using the

camera. Ask a qualified service person for servicing.

3. Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask

a qualified service person for servicing.

4. Do Not put other objects into the camera

No metals or combustible materials inside. If water or other liquid floats in, SHUT DOWN the power

immediately, and ask a qualified service person for servicing. Avoid raindrops and sea water.

5. Handle the camera with care while placing it

Do Not drop the camera or strike or shake it in 8. to avoid the unnecessary damage.

6. Install the camera where it’s away from power source and magnetic fields.

Jamming pictures will be caused if the camera is installed near TV, radio, magnetic device, motor, trans-

former and loud-speaker, etc.

7. Avoid moisture, dust and high temperature

Do Not install the camera near smoke, steam, or dusty and over-heated places.

8. Do not use strong or abrasive detergents

when cleaning the camera body. Use a dry cloth to clean the camera when dirty. In case the dirt is hard to

remove, use a mild detergent and wipe gently. Care should be taken not to scratch the dome when wiping it.

9. Never face the camera towards the sun, or it may damage the CCD.

10. Operate the camera under the required conditions

※ Warning: Do Not install the indoor speed dome outdoors.

Part 2 【Product Features】

1.Auto-recognition zoom camera

◆ Our Intelligent speed dome is auto-recognizable for SONY, HITACHI, SANYO, SAMSUNG, LG, CNB,

CANON etc. and some domestic zoom cameras. (Other zoom cameras should provide their protocols)

2.Built-in Decoder/PAN/TILT

◆ Adopt the ARM design of high performance with high, stable stability. Setting data will not be lost when

Indoor speed dome Outdoor speed dome

Temperature: -10~ 50°C Temperature: -40~55°C

Humidity:<90% Humidity:<90%

KPA::86-106kpa KPA::86-106kpa

DC: 12v/ 5A 50/60Hz DC : 12v/5A 50/60Hz

IR Intelligent Speed Dome Operation Manual ver2.0

Address Code Address Switch Address

Code

Address Switch

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

123 1 1 0 1 1 1 1 0 159 1 1 1 1 1 0 0 1

124 0 0 1 1 1 1 1 0 160 0 0 0 0 0 1 0 1

125 1 0 1 1 1 1 1 0 161 1 0 0 0 0 1 0 1

126 0 1 1 1 1 1 1 0 162 0 1 0 0 0 1 0 1

127 1 1 1 1 1 1 1 0 163 1 1 0 0 0 1 0 1

128 0 0 0 0 0 0 0 1 164 0 0 1 0 0 1 0 1

129 1 0 0 0 0 0 0 1 165 1 0 1 0 0 1 0 1

130 0 1 0 0 0 0 0 1 166 0 1 1 0 0 1 0 1

131 1 1 0 0 0 0 0 1 167 1 1 1 0 0 1 0 1

132 0 0 1 0 0 0 0 1 168 0 0 0 1 0 1 0 1

133 1 0 1 0 0 0 0 1 169 1 0 0 1 0 1 0 1

134 0 1 1 0 0 0 0 1 170 0 1 0 1 0 1 0 1

135 1 1 1 0 0 0 0 1 171 1 1 0 1 0 1 0 1

136 0 0 0 1 0 0 0 1 172 0 0 1 1 0 1 0 1

137 1 0 0 1 0 0 0 1 173 1 0 1 1 0 1 0 1

138 0 1 0 1 0 0 0 1 174 0 1 1 1 0 1 0 1

139 1 1 0 1 0 0 0 1 175 1 1 1 1 0 1 0 1

140 0 0 1 1 0 0 0 1 176 0 0 0 0 1 1 0 1

141 1 0 1 1 0 0 0 1 177 1 0 0 0 1 1 0 1

142 0 1 1 1 0 0 0 1 178 0 1 0 0 1 1 0 1

143 1 1 1 1 0 0 0 1 179 1 1 0 0 1 1 0 1

144 0 0 0 0 1 0 0 1 180 0 0 1 0 1 1 0 1

145 1 0 0 0 1 0 0 1 181 1 0 1 0 1 1 0 1

146 0 1 0 0 1 0 0 1 182 0 1 1 0 1 1 0 1

147 1 1 0 0 1 0 0 1 183 1 1 1 0 1 1 0 1

148 0 0 1 0 1 0 0 1 184 0 0 0 1 1 1 0 1

149 1 0 1 0 1 0 0 1 185 1 0 0 1 1 1 0 1

150 0 1 1 0 1 0 0 1 186 0 1 0 1 1 1 0 1

151 1 1 1 0 1 0 0 1 187 1 1 0 1 1 1 0 1

152 0 0 0 1 1 0 0 1 188 0 0 1 1 1 1 0 1

153 1 0 0 1 1 0 0 1 189 1 0 1 1 1 1 0 1

154 0 1 0 1 1 0 0 1 190 0 1 1 1 1 1 0 1

155 1 1 0 1 1 0 0 1 191 1 1 1 1 1 1 0 1

156 0 0 1 1 1 0 0 1 192 0 0 0 0 0 0 1 1

157 1 0 1 1 1 0 0 1 193 1 0 0 0 0 0 1 1

158 0 1 1 1 1 0 0 1 194 0 1 0 0 0 0 1 1

CCTV SYSTEM

Address

Code

Address Switch Address

Code

Address Switch

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

51 1 1 0 0 1 1 0 0 87 1 1 1 0 1 0 1 0

52 0 0 1 0 1 1 0 0 88 0 0 0 1 1 0 1 0

53 1 0 1 0 1 1 0 0 89 1 0 0 1 1 0 1 0

54 0 1 1 0 1 1 0 0 90 0 1 0 1 1 0 1 0

55 1 1 1 0 1 1 0 0 91 1 1 0 1 1 0 1 0

56 0 0 0 1 1 1 0 0 92 0 0 1 1 1 0 1 0

57 1 0 0 1 1 1 0 0 93 1 0 1 1 1 0 1 0

58 0 1 0 1 1 1 0 0 94 0 1 1 1 1 0 1 0

59 1 1 0 1 1 1 0 0 95 1 1 1 1 1 0 1 0

60 0 0 1 1 1 1 0 0 96 0 0 0 0 0 1 1 0

61 1 0 1 1 1 1 0 0 97 1 0 0 0 0 1 1 0

62 0 1 1 1 1 1 0 0 98 0 1 0 0 0 1 1 0

63 1 1 1 1 1 1 0 0 99 1 1 0 0 0 1 1 0

64 0 0 0 0 0 0 1 0 100 0 0 1 0 0 1 1 0

65 1 0 0 0 0 0 1 0 101 1 0 1 0 0 1 1 0

66 0 1 0 0 0 0 1 0 102 0 1 1 0 0 1 1 0

67 1 1 0 0 0 0 1 0 103 1 1 1 0 0 1 1 0

68 0 0 1 0 0 0 1 0 104 0 0 0 1 0 1 1 0

69 1 0 1 0 0 0 1 0 105 1 0 0 1 0 1 1 0

70 0 1 1 0 0 0 1 0 106 0 1 0 1 0 1 1 0

71 1 1 1 0 0 0 1 0 107 1 1 0 1 0 1 1 0

72 0 0 0 1 0 0 1 0 108 0 0 1 1 0 1 1 0

73 1 0 0 1 0 0 1 0 109 1 0 1 1 0 1 1 0

74 0 1 0 1 0 0 1 0 110 0 1 1 1 0 1 1 0

75 1 1 0 1 0 0 1 0 111 1 1 1 1 0 1 1 0

76 0 0 1 1 0 0 1 0 112 0 0 0 0 1 1 1 0

77 1 0 1 1 0 0 1 0 113 1 0 0 0 1 1 1 0

78 0 1 1 1 0 0 1 0 114 0 1 0 0 1 1 1 0

79 1 1 1 1 0 0 1 0 115 1 1 0 0 1 1 1 0

80 0 0 0 0 1 0 1 0 116 0 0 1 0 1 1 1 0

81 1 0 0 0 1 0 1 0 117 1 0 1 0 1 1 1 0

82 0 1 0 0 1 0 1 0 118 0 1 1 0 1 1 1 0

83 1 1 0 0 1 0 1 0 119 1 1 1 0 1 1 1 0

84 0 0 1 0 1 0 1 0 120 0 0 0 1 1 1 1 0

85 1 0 1 0 1 0 1 0 121 1 0 0 1 1 1 1 0

86 0 1 1 0 1 0 1 0 122 0 1 0 1 1 1 1 0

IR Intelligent Speed Dome Operation Manual ver2.0

power-off.

◆ Precision stepper electrode drive smooth operation, accurate positioning

◆ Infinitely variable speed Continuous 360°pan, tilt turning(180° auto flip), without any blind area.

◆ Automatic identification PELCO-D, PELCO-P Control Protocol

◆ Automatic identification Baud rate 2400,4800,9600

◆ Broadcast address 255 and Invalid address 0, Convenient control

◆ Software address ,Software Baud rate ,Software Protocol function ,Convenient setting

◆ 256 preset positions, 5 automatic programmable cruising function which can store 16 presets, including

guarding point, cruising group,

◆ 4 tracking record, 8privacy protecting area and 8 area indication, etc.

◆ 3 different Optional speed cruising function

◆ RS485 control bus

3.Build-in digital color camera

◆ Integrated digital processing camera with high sensitivity and high resolution.

◆ Auto focus, auto aperture, auto brightness compensation ,auto White Balance.

◆ Auto color/grayscale picture change, auto backlight supplement and auto shutter.

Part 3【Function Description】

This section only mentions main functions and their operation principles , the detailed operation will

be in other section..

1.Target tracking

Users can control the moving direction of lens by pushing joystick up and down, left and right to trace the

target or change the view-angles. The size of visual angle or target image can be adjusted by changing focus.

2.Focus length/auto matching technology of rotation speed

In the situation where focal length is long, the image will be easily distorted because speed dome responses

so fast that even a slight touch of joystick could make the picture shift rapidly. Based on people-oriented de-

sign, this speed dome camera can automatically adjust pan and vertical speed according to the focal length to

make the manual trace operation easier.

3.Auto-rotate

If operator keeps pressing the joystick after reaching the limitation in vertical direction, the lens would

automatically rotate 180°, so we can monitor the hind-scene

4.Set and transfer preset

Preset is a function that we can store parameters like the angle of PAN and the length of focus in the mem-

ory, and the speed dome could adjust itself to reach the angle of PAN and the length of focus when you transfer

the preset.

5. Tour

Automatic tour, which arranges presets in the desired order and interval by programming, is a build-in

function of this intelligent speed dome. With a command, the camera of speed dome would tour automatically

and continuously according to the route and interval preprogrammed.

6.Auto-- scan

The high speed dome camera can automatically and repeatedly scan 360°at both high speed and slow

speed.

7.Limit scan

CCTV SYSTEM

To set the starting point of limit scan by using the start command in the control keyboard, and then use the

joystick to move to the end point of limit scan at a certain speed. After calling the limit scan, camera will auto-

matically scan between the start and end points at the speed of joystick moving.

8.Guarding point

Guarding point is a function that if there is no operation for a long time, dome camera would be back to an

important preset position. It usually takes about 3-254 seconds before the start or stop of guarding point func-

tion.

9.Track record route patterns

4 tour route patterns at most. Each route can continuously record the controlling operation of the PAN and

camera within at least 1 minutes.

10.Privacy protection area setting (This function is related with camera）

Users can cover at most 8 privacy protection areas with black shadow through this setting.

11.Area Indication Function

Users can indicate at most eight areas with titles through this setting. A title will be displayed automati-

cally when the camera move to an indicated area. Note: Function 9, 10 and 11 are only applied to the speed

dome with menu

12.Regular operation Function

Users can in different times, to the operation of the speed dome perform different tasks, Can realize eight

times a day, seven days a week automatic timing function Settings.

13. Auto-tracking Function

Users can set up under the five scenarios for dynamic target, the speed dome automatic tracking targets,

When the target moving outside the picture, or enough to trigger a speed dome tracking function, The speed

dome will be in a preset time, return to a preset scenes.

14. The core technology of intelligent adjustable light

Through instruction and OSD menu to adjust the infrared light intensity and the irradiation angle, so that the

infrared light with the ball machine zoom, environmental changes to achieve the perfect synchronization.

15.Lens control

a、Focus length control: Users would get a panorama or close-up pictures by controlling the keyboard to

adjust focal length.

b、Focus control:

Auto-focus is included in system default. When zooming, camera will focus in the center of picture to

keep the picture clear. Under special circumstances, focus can be done by manual drive.

Please refer to your equipment control manual in terms of specific operation.

※NOTE: Camera can NOT automatically focus in the following situation:

◆Target is not the center of the screen.

◆Clear picture of target would not be guaranteed when observing them both in the distance and close-up at

the same time

◆Target can’t be a strong light object, such as neon light and spotlight

◆Target moves too fast

◆Target is too dark or blur

c、Aperture control:

Auto-IRIS is included in system default. Camera adjusts IRIS according to the change of environmental

light to stabilize images. Auto aperture is advised.

IR Intelligent Speed Dome Operation Manual ver2.0

1.SW2 IP address setting table

In the following table “1” stand for “ON” position in IP address switch.“0” stand for “OFF” position in IP

address switch.

Part 11【code Switch setting table 】

Address

Code

Address Switch Address

Code

Address Switch

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

1 1 0 0 0 0 0 0 0 26 0 1 0 1 1 0 0 0

2 0 1 0 0 0 0 0 0 27 1 1 0 1 1 0 0 0

3 1 1 0 0 0 0 0 0 28 0 0 1 1 1 0 0 0

4 0 0 1 0 0 0 0 0 29 1 0 1 1 1 0 0 0

5 1 0 1 0 0 0 0 0 30 0 1 1 1 1 0 0 0

6 0 1 1 0 0 0 0 0 31 1 1 1 1 1 0 0 0

7 1 1 1 0 0 0 0 0 32 0 0 0 0 0 1 0 0

8 0 0 0 1 0 0 0 0 33 1 0 0 0 0 1 0 0

9 1 0 0 1 0 0 0 0 34 0 1 0 0 0 1 0 0

10 0 1 0 1 0 0 0 0 35 1 1 0 0 0 1 0 0

11 1 1 0 1 0 0 0 0 36 0 0 1 0 0 1 0 0

12 0 0 1 1 0 0 0 0 37 1 0 1 0 0 1 0 0

13 1 0 1 1 0 0 0 0 38 0 1 1 0 0 1 0 0

14 0 1 1 1 0 0 0 0 39 1 1 1 0 0 1 0 0

15 1 1 1 1 0 0 0 0 40 0 0 0 1 0 1 0 0

16 0 0 0 0 1 0 0 0 41 1 0 0 1 0 1 0 0

17 1 0 0 0 1 0 0 0 42 0 1 0 1 0 1 0 0

18 0 1 0 0 1 0 0 0 43 1 1 0 1 0 1 0 0

19 1 1 0 0 1 0 0 0 44 0 0 1 1 0 1 0 0

20 0 0 1 0 1 0 0 0 45 1 0 1 1 0 1 0 0

21 1 0 1 0 1 0 0 0 46 0 1 1 1 0 1 0 0

22 0 1 1 0 1 0 0 0 47 1 1 1 1 0 1 0 0

23 1 1 1 0 1 0 0 0 48 0 0 0 0 1 1 0 0

24 0 0 0 1 1 0 0 0 49 1 0 0 0 1 1 0 0

25 1 0 0 1 1 0 0 0 50 0 1 0 0 1 1 0 0

Figure43

CCTV SYSTEM

4.Problems in practical use :

◆ In the real construction, user often adopts y-junction connection mode whose terminal impedance

are connected between the two farthest equipments (as B and D in figure 21). But it doesn’t comply

with the use requirement of RS485 industrial standard, so it will lower the reliability of control

signal by causing the problems such as signal reflection and a weaker anti-interference ability when

there is long distance among every equipment. Its syndrome is like that speed dome can't be con-

trolled completely or intermittently or keeps running even if it’s stopped. We advise user to use

RS485 allotter which can avoid problems and increase the communication reliability in the situation

mentioned above by change y-junction mode to the connection mode complying with RS485 indus-

trial standard.

5. Wires Recommended

1).12V power supply connection distance and cable material requirement:

2).Requirement of video cable：

NOTE：The same mode cable produced by different manufacturer may differ. The table

above simply mentions the average reference distance of video cable transmitting .

120

主控设备

120

分配器

RS485

A+

B-

Main control

Equipment

RS485 distributor

Power supply cable diameter 0.5mm2

(20#) 1.0mm2(18#) 1.5mm2(16#) 2.5mm2(14#)

Indoor speed dome 72W power

supply 25m(94ft) 45m(150ft) 70m(238ft) 110m(380ft)

Outdoor speed dome 72W

power source 10m(37ft) 18m(60ft) 28m(95ft) 45m(152ft)

Model Max transmitting distance

75-5 370M

75-7 500M

75-9 680M

Model Max transmitting distance

75-2 150M

75-3 200M

75-4 270M

IR Intelligent Speed Dome Operation Manual ver2.0

IR Distance 120M/200M,variety of optional distance

IR light control the camera focal length automatic switch the light at night

Power supply DC 12V, 50HZ

Power consumption 15W( without heating ),50W(with heating )

Synchronous mode Inner synchronization

Video output 1.0vp-p

Focus Iris Auto

Camera Support all mainstream camera currently on the market

Preset 255Presets

Tour 5(Editable)

Guarding position 3-254 seconds (settable)

Boot action All the action of running any can be set

Pattern Tracking Record 4 (256 preset can recording )

Privacy Protection 8 ( need for cameral supported )

Area-Indicative Function 8 zones at most can be set

Regular Operation Function 7 days a week, 8 hours a day, each period of 4 weeks

Auto tracking Multi-scene can be set

Auto Scan 4 differ in speed can be set

Left and right limitation scan 359

Day / Time display

OSD menu Password protection can be set

PTZ Speed to Auto Match focus Speed Auto match according to focus length (3 kind state can be set )

Auto Overturn ON / OFF

Horizontal Overturn Scan 360°continuous overturn

Manual Horizontal overturn speed 0.1°-350°/ s

Vertical Revolving Range 0.01°-250°/ s

Control Mode RS 485

Communication Protocol PELCO-D,PELCO-P auto recognition

Correspondence Baud Rate 2400/4800/9600 auto recognition

Address Code Hardware / software configuration

Operation Temperature Indoor:-10°+50°，outdoor:-40°+55°

Part 4【Technical Parameters】

CCTV SYSTEM

Part 5【Installation preparation】

1.Basic requirements

◆ All electrical work should comply with the latest local electrical regulations, fire-proof pre cautions and

other relative legislations and regulations.

◆ Check whether accessories are as complete as the packing list shows. If not, please contact the supplier.

◆ Make sure that the place where it’s applied and installed meets the requirements of installation.

2.Check the structure of the place of installation.

◆ Make sure that there is enough room to install this product and its accessories.

◆ Make sure that the ceiling, wall and bracket where this product is installed should be able to endure 4 times

as heavy as speed dome.

3. Set DIP switch

◆ Set DIP switch according to speed dome IP address (Detailed information refers to page 30)

◆ Setting IP address by software address refers to page 21【Communication settings】

4.Please keep all the packing material of dome

Please keep the packing material of dome after taking apart the package. If problems occur, please re-

pack it with the original package and send it back to manufacturer.

※NOTE: Non-original package will cause the unexpected damage during transportation.

Part 6【Installation Guidance】

A、 Intelligent speed dome camera mainly has three types of installations:

①:insert type； ②:ceiling type; ③:rack mounting

B、 In according to installation type, there are three ways on rack mounting below :

①:wallhung type ②:column type ③:lifting type

Rack mounting fits for indoor or outdoor installation. Outdoor dome camera has an extra sun-shade shell. Dome

camera IP rate is 66.

Step a. Drill a hole in the ceiling

(1) Use proper tools to drill a hole with 3mm diameter in the

center of installation place. On one side of the hole twist a

self-drilling screw and fix it on the ceiling.

(2)Draw a circle with pencil in ceiling, and then remove the

material inside the circuit.

1、Dome-Insert Installation conditions:

figure（1）

figure（2）

Insert dome camera is applied to indoor ceiling setting

(1) At least 200mm above the ceiling

(2) ceiling thickness is 5mm—42mm

(3) ceiling must bear 4 times the weight of camera at least.

IR Intelligent Speed Dome Operation Manual ver2.0

Part 10【Common Knowledge on RS485 control bus】

1.Basic features of RS485 control bus ：

◆ RS485 control bus is a half duplex communication bus whose impedance is 120Ω. Its load capacity

differs in the different connection interface, IC is 32-128 valid load (including main control equip-

ment and controlled equipments).

2. RS485 control bus transmitting distance:

◆ When using 0.56mm(24AWG) twisted pair line as the communication electric cable, the maximal

transmission distances differ in different Baud rate setting. Maximum transmission distances and

corresponding Baud rates are shown in following table:

◆ The max transmission distance would be shortened in conditions like: when a slim communication

cable is used or the speed dome is used in the environment with strong electromagnetic interference or

there are many equipments connected to control bus, vice versa.

3. Connect mode and terminal impedance

◆ The RS485 industry control bus requires daisy-chain connection mode between equipments, and 120Ω

terminal impedances should be connected at each end. The mode is shown in figure 41. Simplified

connection mode is shown in figure 42.The distance of D must be less than 23 feet (7 meters).

120

32#

120

32#

A+

B-

Figure41

Figure42

Baud rate Maximum distance Baud rate Maximum distance

2400BPS 1800m 4800BPS 1200m

9600BPS 800m 19200BPS 600m

CCTV SYSTEM

Part 9【Simple Trouble Shooting】

Breakdown phenomenon Possible causes Solution

Speed dome has no move-

ment and there is no picture

in monitor when power is

on .

1. The end of 12V DC power supply

isn’t connected with speed dome cor-

rectly.

2. Power failure or transformer break-

down.

1. Check whether speed dome is connected

to 12V DC power supply. Make sure

that connection with sockets is well.

2. Check whether the city power supply is

working well and whether 12V DC trans-

former works well.

After self testing, keyboard

can’t control speed dome.

1. IP address Switch of speed dome is set

incorrectly.

2. Reverse connection and open/short circuit

of RS485 control bus.

3. RS485 control bus breaks down.

1. Reset DIP switches according to DIP

switch setting table. Make sure that the IP

address speed dome is the same with that

of keyboard.

2. Check connection of RS485 control bus

and guarantee well and correct connection.

3. Refer to common knowledge of RS485

control bus .

Dome can be controlled but

without working smoothly .

A. Bad connection of RS485.

B. One line of RS 485 is off .

C. Main machine is too far from dome.

D. Too many parallel connections.

A. Reconnect RS485；

B. Change another RS485；

C. Install a terminal matching

resistance；

D. Install a RS485 distributor.

Blurry picture

1. Focus of speed dome is in the manual

status.

2. Transparent lower dome gets dirty.

1. Change the manual focus status to

auto focus status. Or call the preset

to adjust the focus.

2. Clean transparent lower dome.

No self-testing ,or with

noise

Power supply not enough Replacement to meet the require-

ments of power

Mechanical failure Need to overhaul

There are the vertical

direction of the roll bar

on the monitor, when

switching between cam-

eras

Different phase of the camera power

If several speed dome camera is

connected to the same transformer,

the power supply connection in each

speed dome camera to be the same,

that is, the transformer at one end of

the outlet must be connected to the

terminal on the same side of each

speed dome camera

Control lines reversed or open circuit

Check the wiring of control lines, to

ensure that wiring is correct and

good contact

The address or protocol baud rate of the

speed dome camera is not set correctly Refer to the manual reset

The self-testing success-

fully but can not operate

high-speed dome camera

IR Intelligent Speed Dome Operation Manual ver2.0

Step d. Connect dome lines

⑴ Put video line, power supply line and signal control line

through the round hole in the ceiling mount, and connect the

lines with the corresponding places in dome.( The type of

wire is shown as figure 5)

2、Ceiling-mounted installation ：

Installation conditions:

This installation way is applied to stiff ceiling indoor

(1) The thickness of ceiling must be enough to set up the screws

(2) Ceiling must bear 4 times the weight of camera at least.

Step b. Install ceiling mount

(1) First, keep pushing the ceiling mount into the hole in the

ceiling until the mount is totally inside the hole. Second,

unfold the three brackets and screw them up. Last, when the

metal pieces are fully expanded, tighten the screws to fix the

mount into ceiling firmly.

Warning: A steel safe belt must be used between

ceiling mount and ceiling to avoid that speed dome

accidentally drops. Safe belt should be provided by

user .

Steps e. Dome installation

⑴ Insert the three screws which are in the bottom of dome into

the holes in ceiling mount, and then turn the mount as figure

5 shows to make sure that the screws are inside positioning

slot firmly.

Step a. drill a hole in the ceiling

(1) Draw a circle according to the size of hole with a pencil in

ceiling, and then remove the material inside the circuit.

(2) Drill three holes around the hole in the ceiling according to

the corresponding position in the mount and insert set-

screws in each hole. (Setscrews should be provided by

users).

figure（3）

figure（4）

figure（5）

figure（6）

figure（7）

Step c. Set speed dome

(1) Set (DIP switches) SW2 under the bottom of dome machine

to control speed dome IP address. (Detailed information can

be found in PART 12)

(2) Without SW2 DIP switcher , setting the IP address by soft-

ware address refer to Page21【Communication settings】

CCTV SYSTEM

Step a. . drill a hole on the wall.

⑴As shown in figure 10, taking the installation holes of bottom

surface of wall bracket as the template, draw the drilling

positions and drill the holes:

Step b. Install bracket and housing:

⑴ Put the video lines, power lines and signal-control lines

through the hollow tube of the wall mounting bracket as the

figure 11 shows.

⑵ Install the speed dome camera on the bracket , and fix it

with 3 PCS screws.

⑶ Fix the installed dome camera to the wall with bulgy

screws.

Note :if the camera is used for outdoor environ-

ment, please seal it to be waterproof.

① After winding enough PTFE tapes around the

screw thread , screw the housing firmly to the wall

mounting bracket

②Seal the joint face between wall and the bracket,

holes, and the joint face between bracket and around

the housing with silica gel to be waterproof.

3、Wall-hung installation

Step b. fix ceiling mount

There are two connection ways:

One is from center hole, the other is from the hole beside

⑴Make sure the installation position and the connection way.

Insert the three setscrews in the holes respectively, and then

fasten the screws with gasket and screw cap.(Take the example

of putting the wire through the center of ceiling mount)

Step c. Set speed dome

(1) Set (DIP switches) SW2 under the bottom of dome machine

to control speed dome IP address. (Detailed information can

be found in PART 12)

(2) Without SW2 DIP switches , setting the IP address by soft-

ware address refer to Page21【Communication settings】

Step d Line connection:

⑴ Put video line, power supply line and signal control line

through the round hole in the ceiling mount. ( The type of

wire is shown as figure 9)

Steps e. Dome installation

Insert the three setscrews which are in the bottom of dome

into the holes in the ceiling mount, and then turn the mount as

figure 9 shows to make sure that the screws are inside position-

ing slot firmly.

figure（10）

figure（11）

figure（8）

figure（9）

IR Intelligent Speed Dome Operation Manual ver2.0

Preset NO. Speed dome / camera control content Call preset Set preset

96 Close the track function ¤

97 Start the tracking scenario 1 the corresponding preset 88 ¤

98 Start the tracking scenario 2 the corresponding preset 89 ¤

99 Start the tracking scenario 2 the corresponding preset 90 ¤

100 Start the tracking scenario 4 Corresponding to the first set

of 1-16 presets a cruise ¤

97 Set the low sensitivity ¤

98 Set the middle of sensitivity ¤

99 Set the high sensitivity ¤

100 Tracking lens time close ¤

101 Tracking lens time open ¤

4.Auto-Tracking Function Express

101 The user can arbitrarily set the distance light according to

the camera multiple switching mode 1 ¤

102 The user can arbitrarily set the distance light according to

the camera multiple switching mode 2 ¤

103 IR cut open ¤

103 IR cut close ¤

133 IR light near brightness with the lens set multiple relation-

ship ¤

134 IR light brightness with the lens set multiple relationship ¤

135 IR light far brightness with lens multiple relationship ¤

136

The maximum brightness settings for all lamp: [set No.

136preset + set 50-100 preset, (where 50-100 corre-

sponds to the maximum brightness brightness 50%-100%)]

137

An infrared detection threshold setting: [No. 137 preset +set

36-100 preset, (where 36-100 corresponding infrared sensi-

tivity values lower easily switch to the infrared mode])

128 Set fan start temperature: (set No. 128 preset + set 1-

80preset, 1-80 corresponds to 1-80 degrees) ¤

129 Close the lamp with the fan linkage function ¤

129 IR light with fan linkage function to open the lamp and

fan synchronous open ¤

5.IR Function Express

Indice

Altri manuali CCTV Macchina fotografica digitale

CCTV

CCTV CCM-1481 Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente