CDVI CDV96KP Manuale utente

2 -Wire Intercom System

CDV96KP User Manual

4 5 6

8 9

0 #

2 3

4 5 6

8 9

0 #

2 3

CDV96KP CDV96KP-SF

CDV-ENG-96/KP-V2

Contents

2. Mounting.............................................................................................................. 1

1. Parts and Functions............................................................................................. 1

3.Terminal Description.. ........................................................................................... 2

9.Specications ..................................................................................................... 17

8. Precautions......................................................................................................... 17

7.Power Supply Instructions.................................................................................. 17

10.Cable Requirements.......................................................................................... 18

4. System Wiring and Connections ......................................................................... 3

5.Pan,Tilt & Zoom Function .................................................................................... 7

6. Function Setting Up ............................................................................................. 9

-1-

1.Parts and Functions

4 5 6

0 #

2 3

Camera Lens

Touch Sensitive

Digital Keypad

Speaker

Nameplate

Call Button

Microphone

93 mm

28 mm

182 mm

4 5 6

0 #

2 3

Night Light

2.Mounting

1 2

Connect the cable correctlyDrill holes in the wall to match the size of

screws and attach the rain cover to the wall.

CDV96KP Mounting

Rain Cover

CDV96KP

Attach the panel to the rain cover Using a screwdriver attach the keypad to

the rain cover, see diagram above.

-2-

1 2 3

Lock Control Jumper

BUS

S+ S-

Main Connect Port

3.Terminal Descriptions

Placing Name Label

•Lock Control Jumper: To select the lock type.

•Main Connect Port: To connect the bus line and

the electronic locks.

Using a screwdriver remove the fixing screw, pull forward the panel and slide in the name plate.

•BUS: Connect to the bus line, no polarity.

•PL: External lock power input.

(if using the external power

supply for the locks, the S- will not be connected).

positive(power +).

•S+: Lock power(+) output.

•S-: Lock power(-) output

-3-

Basic Connection

4.System Wiring and Connections

Electric Lock Connection

Note:

1. Electronic lock of Power-on-to-unlock type should be used.

2. The door lock is limited to 12V, and holding current must be less than 250mA.

3. The door lock control is not timed from Exit Button(EB).

4. The Unlock Mode Parameter of Monitor must be set to 0 (by default).

LOCK

BUS PL S+S-

Jumper position in

Connect one lock

2-3

1 2 3

A fail secure (power applied to unlock) electronic lock device should be used.

BUS(IM) BUS(DS)

PC6

AC~

L1 L2 PL S+ S-

Doorbell Button

Switch

1 2 3

DIPS

LOCK

Take off the Jumper

POWER

SUPPLY

BUS PL S+S-

Connect one lock

Door Lock Controlled with Dry Contact

Note:

1. The external power supply must be used according

to the lock.

2. The inside relay contact is restricted to AC or DC

24V/1A.

3. The jumper must be taken off before connecting.

4. Set the Unlock Mode of Monitor for different

lock types.

•Power-on-to-unlock type: Unlock Mode=0 (by

default - monitor code 8010)

Note:

1.must connect CDV96KP correctly before setting.

2.the parameter will be saved in CDV96KP automatically,so you need only set on one monitor.

3.the above diagram is t for icon menu series monitors only, to text menu series monitors,please refer to

the corresponding user manual.

•Power-off-to-unlock type: Unlock Mode =1

- monitor code 8011

Unlock parameter setting(set in monitor)

1.Touch icon on

main menu page.

2.Touch UNLOCK

button and hold for 2s.

3.A digital keypad will be

shown.

About

Local Address 00.00

Video Standard AUTO

System Verson 00.01.00

Display Driver 1.0

Front 1.0

UI 1.0

INSTALLER SETUP 123

-4-

Multi Door Stations Connection

100~240VAC

DBC4A

A B C D

OFF

Impedance

switch

BUS(IM) BUS(DS)

PC6

AC~

4# Camera

L1 L2 PL S+ S-

(Device Address:3)

3# Camera

L1 L2 PL S+ S-

(Device Address:2)

2# Camera

L1 L2 PL S+ S-

(Device Address:1)

1# Camera

L1 L2 PL S+ S-

(Device Address:0)

Code=15 Code=14

BUS(IM) BUS(DS)

PC6

AC~

100~240VAC

Code=0

4 5 6

8 9

0 #

2 3

(Device Address:0)

Basic IN-OUT(Daisy Chain) Wiring Mode

-5-

With DBC4A Wiring Mode

Code=0

OFF ON

DBC4A

A B C D

DBC4A

A B C D

Impedance

switch

Impedance

switch

100~240VAC

BUS(IM) BUS(DS)

PC6

AC~

Code=2

Code=1

Code=3

Code=12

Code=14

Code=13

Code=15

4 5 6

8 9

0 #

2 3

NOTE: DT47M( monitors) used as an example.

(Device Address:0)

-6-

123

456

789

Here are some examples:

Panview function:

Touch icon to zoom the center position.

Screen of monitor

In this case there are two panview modes:

-7-

Please Note: this function requires the CDV47-MGv2 monitor with zoom function.

It is possible to adjust the display view from the CDV96KPv2 door station byusing the

5direction pad button.

When the door station image displayed, move to

the desired position by touching

on the screen to view the image in zoom mode.

Note: The edge of pan/tilt image will not be displayed.

We have divided the screen image into nineparts, as shown

in the image on the right.

5. Pan-tilt & Zoom & Panview

1 2 3

456

7 8 9

Note: Touch the screen again to exit the panview mode.

1 2 3

456

7 8 9

Note: Touch the screen again to exit the panview mode.

-8-

1) Touch area 4: zoom to area 4, the lens moves to area 6, and

then returnsto area 4;(see details below)

2) Touch area 6: zoom area 6, the lens moves to area 4, and then

returnsto area 6;(As details below)

Altri manuali per CDV96KP

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CDVI Sistema di interfono

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente