Ceasa SET&SOFT Manuale utente
SHOWER SOFTENER-CEASA 1
2 SHOWER SOFTENER-CEASA
Application: The product is mainly used for shower water softening, but can also be used for
floor heating, beauty salons, hairdressing salons, washing machines etc.
The softener water is not drinkable.
Please note:
1. Due to occasional updates, some of the text or designs in the manual
may differ from the actual product. Please refer to the actual product.
2. All data has been carefully checked. If there are any printing or
content errors, we reserve the right of interpretation.
SHOWER SOFTENER-CEASA 3
Table of contents
1. Product list…………………………………………………………………………………………………………………………………5
2. Product overview……………………………………………………………………………………………………………………….6
2.1 Characteristics
2.2 Technical Parameters
2.3 Technological Processing of Water
2.4 Appearance and Dimensions
2.5 Structure
3. Installation………………………………………………………………………………………………………………………………….8
3.1 Installation Instructions
3.2 Product Installation
3.2.1 Preparation of Tools
3.2.2 Installation Position
3.3 Pipeline Installation Instructions
3.3.1 Installation after Water Heater
3.3.2 Installation before Water Heater
3.3.3 Drain Pipeline Installation
3.3.4 Power Wire Installation
4. Trial Run……………………………………………………………………………………………………………………………………22
5. Regeneration Operation……………………………………………………………………………………………………………22
5.1 Water Capacity
5.2 Regeneration Salt Consumption
5.3 Regeneration Process
6. Resin Replacement……………………………………………………………………………………………………………………25
7. Parameter Setting…………………………………………………………………………………………………………………….28
7.1 Product Control Panel Overview
7.2 Main Board Socket Overview
7.3 Product Installation Mode Setting
7.4 Regeneration Reminder Day Setting
7.5 Meaning of Operation Codes
8. Troubleshooting……………………………………………………………………………………………………………………….31
9. Warranty Card………………………………………………………………………………………………………………………….32
INDEX
4 SHOWER SOFTENER-CEASA
1. If accessories are required, please purchase superior quality products.
2. Given the particular nature of the environment where the product is used, all the components of
the shower softener have a certain service life. The service life of the main components is listed
in the user manual. Please replace components in accordance with the requirements.
3. The user manual provides guidelines for the correct use of this product. Please strictly follow
the user manual instructions regarding operation, routine inspection and maintenance.
4. We recommend that this product is installed by a qualified professional appointed by the
company authorized distributor. Users must provide details about the mounting surface (such as
the installation surface material, water and electrical layout) for installation.
5. This product is suitable for municipal tap water, with a water pressure of 0.1~0.6 Mpa and a
water temperature of 5℃-70℃. Not permitted for use outside this range.
6. The product is only suitable for indoor installation and use. It must be installed in a cool and dry
place, away from direct sunlight. Avoid exposing the pipe connected to the product to light, heat,
corrosive environments and impact from sharp objects.
7. This product should be installed at around 1 meter from a reliable worldwide floor drain for
drainage.
8. Never spray water on this product.
9. In case of product failure, please cut off the water supply and contact your distributor as soon as
possible.
10. In order to ensure efficient regeneration, please use our company-approved regeneration salt
particles where possible.
11. If the transformer and wire are damaged, they must be replaced at our factory.
12. Since the product needs electricity to operate, please do not install the transformer in a location
where water splashes are possible.
13. Our company shall not be liable for any damage resulting from operation not in accordance with
the above considerations.
NOTICE
SHOWER SOFTENER-CEASA 5
Name
Quantity
Remarks
Shower softener
1
Stainless steel plate
1
Transformer
1
3 meters
Accessories
1
Expansion
tube/screw/gasket
User manual
1
Certification
1
Optional accessories
Name
Quantity
Remarks
Braided hose
1
600mm
Cut-off filter
1
¼" Drain pipe
3
Cold water connector
1
Installation before the
water heater
Hot water connector
1
Installation before the
water heater
½" Elbow
1
Installation before the
water heater
1. PRODUCT LIST
Note: Optional accessories are required to install the product before the water heater.
If needed, please purchase from your distributor.
6 SHOWER SOFTENER-CEASA
2.1. Characteristics
●Wall-mounted, no brine tank, small volume.
●Dynamic regeneration mode. Higher water capacity. Save salt and water.
●Extensive applicability: installation before or after the water heater. Installed before
the water heater, it prevents scaling in the heater.
●Automatically controlled regeneration time, one button to perform regeneration. No
need for human supervision. LED display.
●Days of use reminder, next regeneration time display.
●Automatic backwash function that reduces resin hardening and strainer blockage to
improve resin service life.
●Built-in quick connector for easier maintenance and resin replacement.
●Outlet with check valve to prevent the backflow of water from the water heater.
●Data saved after power off.
2.2. Technical Parameters
Item
Requirements
Work Pressure
0.1～0.6MPa
Water Temperature
5℃～70℃
Environment Temperature
5℃～50℃
Transformer
AC100～240V/50～60Hz
Water regeneration capacity
750L
Water inlet/outlet specification
G1/2
Regeneration salt consumption
400g
Suitable water
Tap water
2. PRODUCT OVERVIEW
SHOWER SOFTENER-CEASA 7
Water quality: Conform to the “Health safety evaluation specifications and functions
for drinking-quality water processors -- general water processors” (2001)
All operating parameters for this product have been measured under standard test
conditions (total water hardness test in CaCO3, 200 mg/-), and will change under
different operating conditions
2.3. Technological Processing of Water
Tap Water Na cationic resin Soft water
2.4. Appearance and Dimensions
Product Diagram
Drain pipe
Outlet
Inlet
8 SHOWER SOFTENER-CEASA
2.5. Structure
3.1. Installation Instructions
This product can be installed in one of two ways:
A. Installation before the water heater
Advantage: Softens water first, then heats it, to prevent scaling in the water heater,
save energy and protect the environment, and soften the bathing water.
B. Installation after the water heater
Advantage: The installation after the water heater is convenient for pipeline
installation, softens the bathing water, and is suitable for users looking to decorate.
Salt tank cover
Soluble salt tank
Resin
Riser pipe
Resin tank
Control valve
3. INSTALLATION
SHOWER SOFTENER-CEASA 9
The installation method must be chosen between the above two according to the
user’s needs.
3.2. Product Installation
This product features a wall-mounting system. Please rely on a professional for the
installation. If you decide to install it yourself, please follow the steps below.
3.2.1. Preparation of Tools
The following tools are required for installation: adjustable wrench, pipe wrench,
screwdriver and percussion drill.
3.2.2. Installation Position
(For details on the product installation method to determine the installation position
and pipe connection, please refer to the pipe installation instructions in the user
manual).
When this product fails to use the resin, salt needs to be added for the regeneration. In
order to add salt, the user can choose at what height to hang the product based on
their own height. This product should be installed at around 1 meter from a reliable
worldwide floor drain.
Product wall-mounting steps:
2.1 Open the package and check if the softener is complete and all accessories
are included.
10 SHOWER SOFTENER-CEASA
2.2 Remove the expansion screws and stainless steel plate. Use the holes in the
plate as a reference to mark the drilling locations on the wall using the
percussion drill. Our company provides expansion screws for ST3.9 x30, so
we recommend selecting a 6 mm diameter drill bit. When selecting the height
to hang the product, please give priority to what is convenient for you in terms
of adding salt.
2.3 Normally the stainless steel plate can be installed using just four expansion
screws in a diagonal pattern in soft walls, such as wood, lime…Installation
under other special conditions may require more screws. Please refer to figure
1.
2.4 Insert the expansion screw tube into the drilled hole, then use a screwdriver
to fix the plate to the wall, as shown in figure 2, with the raised side facing
outwards.
2.5 Install the unit on the slots of the fixed plate, then complete the hanging
process. The appearance after installation is shown in figure 3.
Figure 1. Install the stainless steel plate
Expansion screw tube
Stainless steel plate
Self-tapping
screw
Indice
Altri manuali Ceasa Distributore d'acqua
