7
Programmed Playback
1. In stop mode, press MEMO.
The player enters the program mode. The memory
indicator lights on the display. The TRACK No. and
STEP No. indicators blink.
2. Press numeric buttons
They are automatically stored in the program memo-
ry order.
Example to program tracks in the order 3 - 15:
Press 3with the numeric button of the remote
control. 3 appears in the Music Calender, TRACK 3
and STEP 2 blink in the display. Then press +10
and 5.
3. Press the play button Ź
•The same track can be programmed repeatedly.
•Playback stops when the last programmed track
has finished playing.
•The programmed contents will be held in memory
even after program playback has been completed or
when playback is stopped be pressing STOP.
•To terminate the program mode, press MEMO. in
Stop mode.
Checking the programmed contents:
The programmed contents can be easily checked
using the CHECK button in STOP mode. Each time
the button is pressed, the track number and STEP
number appear in the programmed order.
Clearing the program memory
• In STOP mode press CLEAR for more than 2 se-
conds to clear the program memory.
• The program is also cleared by opening the tray.
• Once the CD player has been powered off, any
program content is cleared.
Changing the program:
1. In STOP mode, press CHECK to indicate the
desired STEP number in the display
2. Press CLEAR. The track number displayed will be
deleted and the next track advance up.
Repeat the same steps to delete other track num-
bers.
Renewing a track:
1. In STOP mode, press CHECK to indicate the
desired STEP number in the display
2. To modify the program, input the desired TRACK
No. using the numeric buttons. The indicated track
which was previously programmed is modified.
Adding a track:
To add new track to the program, input the track
number using the numeric buttons in the STOP
mode. The track is added to the end of the program.
CHECK
5
3
+10
CLEAR
MEMO
