Cedia FLATLIFT SUPERFLAT Manuale utente
P.01
Operating Manual
Outperform. Outlast.
Operating Manual
Operating Manual
P.02
Operating Manual
Outperform. Outlast.
CONTENTS
CONTENTS
K.01 INTRODUCTION
K.02 FEATURES
K.03 PRODUCT DIMENSIONS
K.04 INITIAL PRODUCT SET-UP
K.05 PRODUCT CONTROL
K.08 TROUBLE SHOOTING
Set-up P.06
Images P.07 - P.08
Programming the remote control (S435) P.09
Resetting the receiver P.10
K.09 LEGAL NOTICE
K.06 PRODUCT INTEGRATION
Information TV swiveling P.11
P.03
Operating Manual
Outperform. Outlast.
CONTENTS
INTRODUCTION
INTRODUCTION
C.01:
Quality
In the choice of our components, our primary focus was on ensuring a high level of functionality,
straightforward use, safety and reliability.
We would like to thank you for the trust you have placed in our Flatlift brand products.
We can help you with your installation through providing individual customer care.
For safety reasons, the unauthorized conversion and/or changing of the product is not permitted. Do not
dismantle this product.
This product is not a toy and does not belong in the hands of children.
Do not allow the product to become damp or wet.
Do not leave the packaging material lying around as children may choke if they swallow it.
The product will be damaged if it is dropped, even from a low height.
Before using the product for the rst time, please check that the free raising and lowering of the Flatlift
including the mounted TV equipment is possible and ensure a collision-free run.
For legal reasons and insurance purposes, your Flatlift is equipped with an ‘automatic safety
device’.
This means that the button which controls the raising and lowering must be pressed down all
the time.
The system stops and remains in the same position as soon as you let go of the button.
Intended Use
The product swivels out of LCD and plasma TV equipment.
All company names and product names are trademarks of the corresponding owner. All rights reserved.
The scope of supply can vary depending on the product and the range of xtures and ttings. Please
check that the product supplied is complete and inform us within seven days of delivery if the scope of
supply is not complete.
Safety and Hazards Recommendations
Please read this chapter carefully and follow all of the instructions provided. In this way you are able to
guarantee the reliable operation and a long lifespan for your lift system. Keep the operating manual in a
safe place.
In the event of damage which is the result of non compliance with this operating manual, all claims pertai-
ning to the guarantee are null and void. We generally accept no responsibility for secondary damage.
We accept no responsibility for damage to objects or persons which is caused by the inappropriate use of
the product or through ignoring the safety instructions. In such cases, all claims pertaining to the guaran-
tee are null and void.
P.04
Operating Manual
Outperform. Outlast.
Features:
Installation dimensions Flatlift
H=750mm W=1540mm D=60mm
TV weight max. 150 kg
TV size 52-65“ (inch)
opening rate 18%/h
Soft Start / Soft Stop
Low noise level < 45 db
Environmental temperature from +5°C bis 40°C
Flatlift Superat
Control box
230V power supply unit
Motor cabel (1x)
433,92 MHz receiver
433,92 MHz remote control
Scope of supply:
PRODUCT FEATURES
PRODUCT FEATURES
C.02:
BUY NOW
L
I
F
E
T
I
M
E
R
e
p
a
i
r
c
o
s
t
l
i
m
i
t
5
y
e
a
r
s
f
u
l
l
s
e
r
v
i
c
e
GUARANTY
P.06
Operating Manual
Outperform. Outlast.
Initial setting /installation:
1) Fix your Flatlift Superat (img.1, no.1 and P.07, img. 1b) with 2 screws upon the wall. Depending on
assembly you can swivel your Superat system left- or rightwards
2) Connect the motor (img.1, no. 2) with the motor cable (P.08, img. 3) through the control box
(P.08, img 2, no. 39).
3) Connect the receiver (P.08, img. 4, no. 4) with the the control box (P.05, img 2, no. 5)
4) Link the power cord (P.08, img. 5) with the control box (P.08, img. 2, no. 6) and than with the mains
voltage.
5) Connect the wall power supply (P.08, img. 4, no. 7) of the receiver with the mains voltage.
6) Swivel out and in your Superat for 2 times. Observe at the moving that your system has a collision
clear course.
7) You can scroll the vertical mountings to adept them to your TV holdings (P.07, img. 1c).
8) Now you can mount your TV (P.07, img. 1d) on the Superat. Please consider that the liftsystem
needs space between the TV and the e.g. covering (P.11, img.1).
If you separate the motor cable from the control box, then the Flatlift must be initialised all
over again.
1
Image 1
INITiALPRODUCT SET-UP
INITAL PRODUCT SET-UP
C.04:
2
P.09
Operating Manual
Outperform. Outlast.
Image 2
56
3
4
1
Image 1
PRODUCT CONTROL
PRODUCT CONTROL
C.05:
2
INITIALPRODUCT SET-U
Programming the remote control (S435):
You can also get additional remote controllers for your Flatlift system (optional extra). As the controllers are
coded, you have to programme them.
1) To access the programming key, remove the cover (image 1, no. 1) on the receiver.
2) Press down the left hand key (image 1, no. 2). After this, an LED (image 1, no. 3) will then ash slowly.
3) Holding the programming key down, press the rst key on the remote control at the same time (image
2, no. 5). On recognising the remote control, the LED (image 1 no. 3) starts to ash rapidly.
4) Release both of the keys.
5) To store a second channel, repeat the procedure starting at step 2 using the second key on the remote
control (image 2, no. 6). If your remote control has been successfully recorded, you should hear a soft
‘click’ in the receiver when you press down the key on the controller.
P.010
Operating Manual
Outperform. Outlast.
Image 3
2
3
4
1
Abb.5
PRODUCT CONTROL
PRODUCT CONTROL
C.05:
Image 4
Resetting the receiver:
It may sometimes occur that the transmitting codes stored in the receiver are lost.
In this case, the receiver must be cleared and re-programmed.
1) To access the programming key, remove the cover (image 1, no. 1) on the receiver.
2) Press down both of the programming keys (image 3, no. 2 + 4) until the LED (image 3, no. 3) rapidly
ashes. This is the signal that the memory has been successfully cleared.
3) Now re-enter your remote control (refer to P.09).
Connection to a room control system:
You can connect your Flatlift to a room contro
l system (image 5) if this system has 2 relay outputs
with potential free contacts. These relays must be
actuated for a programmable time period.
1) Remove the receiver from the power supply
2) Remove the cables (contacts 2-4) from the receiver
(image 4).
3) Now connect the blue and red cable to one of the
relay outputs (control command: lower Flatlift).
4) Bridge the blue cable onto the second relay
output and also attach the green cable to this
relay output (lift Flatlift).
Indice
