CEL-FI GO Istruzioni operative e di manutenzione

Indice

Altri manuali CEL-FI Estensione

Manuali Estensione popolari di altre marche

SY

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

Install Service Antenna

2

For best performance make sure there is 50cm of metal around

the base of the antenna.

Mount your Donor Antenna on the exterior of the vehicle, towards

the rear, according to its design, and the type of vehicle it’s being

used with. Make sure you consider the cable connection to the

Cel-Fi GO unit with your location choice.

Install Service Antenna in the cab, towards the front, where

coverage is needed. Ideally, there should be substantial material,

like the metal of the roof, between the Donor and Service

Antennas, to improve isolation.

DONOR ANTENNA (Not Included)

SERVICE ANTENNA

(Not Included)

Cel-Fi GO is an evolved cellular smart signal booster design

that can amplify cellular signals up to 70 dB. Connect a single

Donor Antenna to receive the macro-network signals, and then

a single indoor Service Antenna where you need service, and

Cel-Fi GO will do the rest automatically.

Install Donor Antenna

I

MOBILE VERSION

DONOR ANTENNA

Cel-Fi GO

Quick Start Guide

Smart Signal Booster™

4Connect Donor & Service Antennas

to the Cel-Fi GO Unit

5Plug in Cel-Fi GO & Select Mode

6Tips & Tricks

7Cel-Fi WAVE

3Mount Cel-Fi GO

CEL-FI GO

OPTIONAL

LOCATION

Press the MODE button on the unit

to select desired scanning mode.

Status Indicator will blink during the

setup process, and may take a few

minutes to complete.

(OPTIONAL: use your smartphone

to select mode. Download the

Cel-Fi WAVE app, and follow the

on-screen instructions.)

Find a good mounting location

in your vehicle. Location should

contact with external objects.

Make sure the unit is within

cable range of the 12V power

supply on your vehicle.

Best to make sure all cable

lengths support the intended

mounting location BEFORE

permanent mounting.

DO NOT plug in at this time.

• Keep Donor and Service Antennas separated/

isolated from each other for best performance

• For best performance, the cable between the Outdoor

Antenna and GO unit should be as short as possible

• Use sealant if any connections are exposed to

elements

For more Cel-Fi GO features, go to App Store or Google

play and download the mobile Cel-Fi WAVE app.

(NOTE: If you do not have a compatible smartphone, go to

to download the Desktop app.)

LEFT SIDE: Service Antenna Connector

RIGHT SIDE: Donor Antenna Connector

(*NOTE: if Error, go to troubleshooting

at )

AUTO

3G

4G LTE

MODE

SELECT

BUTTON

MODE

STATUS

INDICATOR

Boosting 3G

Boosting 4G LTE

Error*

STATUS

INDICATOR

NETWORK STRENGTH

12V POWER SUPPLY

DONOR ANTENNA

DONOR ANTENNA

DONOR ANTENNA

CEL-FI GO

CEL-FI GO

CEL-FI GO

TOP VIEW

STATUS

INDICATOR

MODE

SERVICE

ANTENNA

SERVICE

ANTENNA

SERVICE

ANTENNA