Celestron 44423 Istruzioni per il montaggio
D I G I TAL
MICROSCOPE IMAGER
SOFTWARE MANUAL
MODEL #44423
2 | ENGLISH
A. SOFTWARE PRE-SETS
1. When running the S-Viewer software for the first time, taking the time to make a few pre-set choices will make future use
easier and more effective.
2. When more than one video device is available on the computer, the software allows you to select the target video device you
wish to use.
3. Select Video Capture Device from the Option tab in the main toolbar.
1. OPERATING INSTRUCTIONS
Note: The contents of this manual and updates are subject to change without notice.
4. When the dialog box Select Device appears, you can select the target video device in the list of devices.
5. Next, set the video resolution. To begin, select Option—>Video Resolution.
ENGLISH | 3
6. When the dialog box Properties appears, you can change the video resolution by choosing from the list of options.
7. Next, set the desired video attributes.
8. Select Option—>Video Properties to adjust the basic video capture properties.
4 | ENGLISH
9. The Cap Properties window will appear.
10. The Video Proc Amp tab allows you to adjust the video Brightness, Contrast, Hue, and other attributes.
11. The Camera Control tab allows you to pre-set the Aperture (Iris) of the camera.
ENGLISH | 5
12. Finally, select how you would like to save your recordings.
13. Select Option—>Save Option, and the Save Option dialog box will pop up.
14. From the Save Option window, you can set where and how you would like the recordings to be saved to your computer.
6 | ENGLISH
15. Shortcut: Clicking on the vertical rectangle next to the Folder address bar will bring up the Browse for Folder window.
16. Once you have made your selections here, your recordings will always be saved accordingly when you select File—>Save.
17. Helpful Tip:If you ever would like to save a recording to a different location, simply select File—>Save As and the
Save As window will appear to enable you to save the file somewhere else on your computer.
ENGLISH | 7
B. OPERATION- MENU CONTROLS
FILE MENU
1. Open Picture Folder: Opens the folder set as the default location for saving
recordings made with the software.
2. Open: Allows you to open files from their saved locations.
3. Close: Closes the opened videos or images.
4. Save: Saves the current video or still image to the default file location.
For more information on defining the file location, see Option—>Save Option.
5. Save As: Opens the Save As window to enable you to save a recording to a
location other than that specified as the default location.
6. Exit: Exits the application.
VIEW MENU
1. Status Bar: Displays or conceals the status bar.
2. Tool Bar: Displays or conceals the consequently-used tool bar.
3. Process Bar: Displays or conceals the process bar.
4. Measure Bar: Displays or conceals the measuring tool bar.
5. Full Screen: Displays the video in full screen. (Use the Esc key to return to
normal view.)
8 | ENGLISH
VIDEO MENU
1. Adjust: Opens the Cap Properties window to allow adjustment of video
parameters (Color, Exposure, WB, Frame Rate, Power Frequency, etc.).
2. Enable: Activates or deactivates the real-time processing effects
(described below) and/or real-time measurement.
3. The rest of the commands in the Video menu are also accessible via
the toolbar.
The effects of these commands are as follows:
Original Image A. Flip Horizontal
B. Flip Vertical C. Gray
ENGLISH | 9
A note on Binary Video:You can adjust the threshold
value of binary (1 to 255) to display dynamically; simply
check the Enable box in the Binary window to use or
deactivate the binary real-time processing effect.
4. RGB: Opens and closes the RGB real-time video
control window.
A. To use these RGB controls, simply check the Enable
box in the RGB Adjusting window.
B. A control window for advanced RGB adjustments
can be accessed through the Advanced button.
D. Negative
F. Sharpen
E. Emboss
G. Binary
10 | ENGLISH
MEASURE MENU
1. The commands in the Measure menu can also be accessed in the toolbar under Measure.
A. This toolbar is initially positioned vertically and to the right of the image area in the software,
but it can be dragged to a horizontal position along the top if desired.
C. Simply check the Enable box in this window to
activate these controls.
D. Adjust the red-green-blue slide bars for video
tri-color matching.
E. Apply:Selects options from list box and then
applies them to the current video.
F. Add: Adds the adjusted red-green-blue value to
the database and displays this formula in the list.
G. Delete: Deletes options from the list or database.
Altri manuali per 44423
1
Indice
Lingue:
Altri manuali Celestron Microscopio
Celestron
Celestron 4040 Manuale utente
Celestron
Celestron 44308 Manuale utente
Celestron
Celestron 4010 Manuale utente
Celestron
Celestron 44302-B Manuale utente
Celestron
Celestron 44360 Manuale utente
Celestron
Celestron 44340 Manuale utente
Celestron
Celestron 44341 Manuale utente
Celestron
Celestron FlipView 44315 Manuale utente
Celestron
Celestron 44310 Manuale utente
Celestron
Celestron 44320 Manuale utente
Celestron
Celestron 44121 Manuale utente
Celestron
Celestron kids Manuale utente
Celestron
Celestron FirstScope 21024 Manuale utente
Celestron
Celestron COSMOS 44362 Manuale utente
Celestron
Celestron 44320 Manuale utente
Celestron
Celestron 44342 Manuale utente
Celestron
Celestron 44104 Manuale utente
Celestron
Celestron 44124 Manuale utente
Celestron
Celestron COSMOS 44362 Manuale utente
Celestron
Celestron 44341 Manuale utente
