Celia & Perah M6 Manuale utente
M6 | The Dramatic Moment
User Manual
Wireless Scalable Hi-Fi Audio System
2 3
Table of Contents Table of Contents
Getting started .................................................................................................................... 4
Package contents ................................................................................................................................... 4
Controls, connections and display ............................................................................................... 5
Installation precautions ...................................................................................................................... 7
Installation .................................................................................................................................................. 8
Installation suggestions ...................................................................................................................... 11
Audio source inputs .............................................................................................................................. 12
Settings ................................................................................................................................... 13
Powering on .............................................................................................................................................. 13
Subwoofer and Zone 2 speakers connection (if any) ........................................................ 13
Main Speakers' left and right channels settings ................................................................... 15
Zone 2 Speakers' left and right channels settings .............................................................. 15
Sound testing .......................................................................................................................................... 15
Remote control .................................................................................................................. 16
Remote control buttons ..................................................................................................................... 16
Buttons functions explanation ....................................................................................................... 16
Bluetooth ...............................................................................................................................18
Pairing ........................................................................................................................................................... 18
Unpairing .................................................................................................................................................... 18
Wi-Fi .........................................................................................................................................19
Connecting M6 to your Wi-Fi network ..................................................................................... 19
Wi-Fi playback .................................................................................................................... 24
C&P Connect playback instructions ............................................................................................ 24
Using AirPlay ............................................................................................................................................ 25
Care and Maintenance .................................................................................................. 26
Troubleshooting ............................................................................................................... 27
Important safety instructions ....................................................................................29
4 5
① ON/OFF ⑥ 3.5 mm jack input
② Source ⑦ Optical input
③ WPS (Wi-Fi connection) ⑧ DC in
④ CONN. (C&P wireless connection) ⑨ RCA line connector
⑤ USB-C input ⑩ Coaxial input
Ⓐ Remote control receiving area Ⓒ LED display
Ⓑ LED status indicator
Package content
Getting started Getting started
Controls, connections and display
Package content description
Please make sure that the package contains the following components:
»Main Speakers
»Main Speakers │ | Control panel and display
»Subwoofer
»Zone 2 Speakers
2.1 set-up 4.1 set-up 6.1 set-up
Main Speakers (pair) 1 unit Main Speakers (pair) 1 unit Main Speakers (pair) 1 unit
Subwoofer 1 unit Zone 2 Speakers (pair) 1 unit Zone 2 Speakers (pair) 2 units
Subwoofer 1 unit Subwoofer 1 unit
Master speaker (front) Master speaker (back)
Remote control
Adapter Power cord RCA cable Rubber pads Rubber pads template User manual
Master speaker Slave speaker
Adapter Power cord RCA cable Rubber pads Rubber pads template
Master speaker Slave speaker
Subwoofer
Adapter Power cord
6 7
LED indicator Current state
Steady light Stand-by
Blinking light Entering pairing mode
Change in quantity It indicates whether the Zone 2 Speakers or the Subwoofer
are currently connected
LED indicator Current state
Slow blinking Stand-by
Quick blinking Waiting for the Main Speakers to enter pairing mode
Steady light Paired with the Main Speakers
LED indicator Current state
Slow blinking Stand-by
Quick blinking Waiting for the Main Speakers to enter pairing
mode
Steady light Paired with the Main Speakers
LED indicator
The LED display provides information such as source, volume and 3D mode selected, as well as
an interface when operating the remote control; the LED status indicator shows the connection
status of the Subwoofer and the Zone 2 Speakers. For detailed instructions, please refer to the
table below.
Main Speakers and Zone 2 Speakers can be installed on wall mounts or desk stands as well.To
purchase them, please contact C&P's distribution channel or visit directly the C&P website at
www.celia-perah.com.
• To avoid any interference, please keep the Main Speakers and other wireless devices (such
as Wi-Fi routers, wireless phones etc.) at least 30 cm away one from the other, and make sure
that no wall or metal barrier is found between the Main Speakers, the Zone 2 Speakers and
the Subwoofer.
• Direct the front (soft grille) of the Main Speakers towards the centre of the room.
• If you wish to install the Main Speakers on a bookshelf or cabinet, make sure to position
them nearby the front edge to avoid the sound to be aected.
• Place the Subwoofer's rubber pads on the ground and make sure that the power outlet is
located nearby the installation spot.
• Do not place anything on top of the Main Speakers or the Subwoofer.
• Keep the speakers away from heat sources.
LED indicator
LED indicator
»Subwoofer │ | Connections
Installation accessories
»Zone 2 Speakers │ | Connections
① DC in
② CONN.
③ LED status indicator
④ Software update port
① DC in
② CONN.
③ LED status indicator
④ Software update port
⑤ RCA line connector (left and right
channel connection)
Installation precautions
Getting started Getting started
Subwoofer(back)
Master speaker (back)
8 9
Installation
»Main Speakers
»Subwoofer
»Zone 2 Speakers (if any)
① Master and slave speaker positioning
Position the master speaker—the one with the control panel on the back—on the left side
of the listening position and the slave speaker on the right side. Depending on the position
of the TV screen and the surroundings, the speakers can be placed upright on the left and
right sides of the screen, or horizontally below the screen.
① Installation spot
Place the Subwoofer nearby a power outlet with the rubber pads on the
ground.
Tip: Place the Subwoofer at a distance of 30 cm from the corner of the room for
optimal performances. Place the Subwoofer nearby the listening position for a
more direct and powerful bass performance.
① Master and slave speaker positioning
The active speaker—the one with the connection ports and the buttons on the
back—should be installed to the left side of the listening position, while the
passive speaker should be installed to the right.
② Adhesive rubber pads
Align the template to the four corners of the speaker's bottom and attach the rubber pads
one after the other. ② Connecting the power
Plug one end of the power cord into theDC INpower port on the back of the
Subwoofer and plug the other end into a power outlet.
Attention:The LED indicator will light up and blink slowly.
③ Master and slave speaker connection
Insert the RCA cable into the L/R into the connection ports on the back of the two speakers.
Getting started Getting started
④ Connecting the power
Plug one end of the power cord into the DC IN power port on the back of the
active speaker and plug the other end into a power outlet.
Master speaker Slave speaker Master speaker Slave speaker
Upright placementH orizontal placement
10 11
③ Slave and master speaker connection
Insert the two ends of the RCA cable into theL/RandCH Outconnection ports on
the back of the Zone 2 Speakers.
④ Connecting the power
Plug one end of the power cord into theDC INpower port on the back of the
active speaker and plug the other end into a power outlet.
Attention:The LED indicator will light up and blink slowly.
Installation suggestions
Getting started Getting started
2.1 set-up - suitable for the bedroom
4.1 set-up - suitable for the living room
6.1 set-up - suitable for larger living rooms or commercial spaces
② Adhesive rubber pads
Align the rubber pad template to the four corners of the speaker's bottom and
attach the rubber pads one after the other.
Master speaker Slave speaker
Upright placementH orizontal placement
12 13
Audio source inputs Powering on
Subwoofer and Zone 2 Speakers pairing (if any)
You can connect the Main Speakers to your TV using the following inputs:
optical, coaxial, 3.5 mm jack
You can connect the Main Speakers to your PC using the following inputs:
USB, 3.5 mm jack, Bluetooth, Wi-Fi
You can connect the Main Speakers to your smartphone or tablet using the following inputs:
Bluetooth, Wi-Fi, 3.5 mm input
You can connect the Main Speakers to your gaming console or Blu-ray player using the
following inputs: Optical, coaxial
You can connect the Main Speakers to other sources such as turntable or CD player using
the following inputs: 3.5 mm jack
Attention: to connect an audio source wirelessly, using Bluetooth or Wi-Fi, see pages 18 to 23.
① Remove the battery insulation slip from the battery compartment of the remote control to
allow the remote control battery to supply power.
② Point the remote control at the remote control receiving area on the front of the speaker and
press thePowerbutton: you will hear the system power-on tone.[LED display: boot animation
and preset audio source (BT)]
Attention:The next time you power on the system, the most recently used audio source will
be selected by default.
② Press and hold the CONN. button on the
Zone 2 Speakers until the LED indicator starts
blinking rapidly: the Zone 2 Speakers are now
in the C&P wireless connection pairing mode.
» Subwoofer/Zone 2 Speakers operation:
① Press and hold the CONN. button on the
Subwoofer until the LED indicator starts
blinking rapidly: the Subwoofer is now in the
C&P wireless connection pairing mode.
Getting started Setting up
ON/OFF
14 15
Tip: Main Speakers Main Speakers、 Zone 2 Speakers。
② After pairing successfully, the LED indicators on the Subwoofer and the Zone 2 Speakers
will stop blinking, and the number of LEDs displayed on the Main Speaker's display will vary
accordingly to the conguration (a 2.1 conguration will be signalled by two LEDs, 4.1/6.1
congurations will be signalled by three LEDs);Now, press the CONN. button of the Main
Speaker again to exit pairing mode and stop searching for new speakers to connect.
»Main Speakers operation:
① Short press the CONN. button on the Main Speaker control panel: the LED will go from
steady light to blinking, indicating that the Main Speaker has entered the C&P wireless
connection pairing mode. The Main Speaker will automatically search for nearby speakers
that can be connected.
Main Speakers' left and right channels setting up
Zone 2 Speakers' left and right channels setting up
Testing the system
The active speaker is preset to be the left channel. If your power outlet is found on the right side,
you can switch the active speaker to the right channel by following the steps below.
Short press thePowerbutton on the control panel of
the Main Speaker to swap channels. The LED display
will show an R (right channel), and the slave speaker
will show an L (left channel).(After pressing the
power button again, the left and right channels will
be swapped again.）
Attention:The system will automatically return to
the default settings after powering it o.
The active speaker of the Zone 2 Speakers is pre-set to be the left channel. If your power outlet
is found on the right side, you can switch the active speaker to the right channel by following
the steps below.
Short press theCONN.button on the back of the active speaker
to swap to R (right channel);the slave speaker will beep to
indicate that it has been swapped to L (left channel).(Press
theCONN.button again and the left and right channels will be
swapped again.）
① 1. Connect an audio source from TV/PC/Blu-ray player/
Turntable.
② 2. Press the audio source button [OPT/Coaxial (COA)/USB
(USB)/3.5mm (AUX)] on the remote control to switch the
audio source from the preset one [Bluetooth (BT)] to the
audio source that is currently connected.
③ 3. The Main Speakers, the Subwoofer and the Zone 2
Speakers (if any) will start reproducing the sound.
④ 4. Press theMutebutton on the remote control.
⑤ The Main Speakers, the Subwoofer and the Zone 2 Speakers
(if any) will stop reproducing the sound.
Attention:If the audio source you are connecting to is a TV, turn
o the built-in speakers to avoid any sound distortion.For the
detailed steps, please refer to the TV user manual.
Setting up Setting up
MUTE
Master speaker LED display explanation
No speakers connected 2.1 set-up 4.1/6.1 set-up
16 17
Remote control buttons
Buttons functions
You can connect all the audio sources at once and switch through them by operating the
remote control.
① Make sure that all the audio sources are connected and powered on.
② The interaction between the sound sources, the buttons on theSOURCEarea of the remote
control, and the LED display is as follows:
On the remote:
• Press ▲ in the VOL area to increase the volume. [LED display: from the current level up to
+99]
• Press ▼ in the VOL area to decrease the volume. [LED display: from current level down to
mute]
• Press theMutebutton to mute the speakers and press it again to unmute them. [LED display:
mute or previous volume]
Tip:When connecting a new audio source for the first time, set the volume of the audio
source to the maximum level. By doing so, you will be able to adjust the volume by
operating the remote control only.
You can freely adjust the volume of the left and right channel to achieve the best listening
experience based on the placement of the speakers and the listening position.
① Press theBalancebutton on the remote control.[LED display: currently set value; default value
is 0]
② Press the ▲ or ▼ buttons in theVOLarea to adjust the volume of the left and right channel.
[LED display: adjust gradually from the currently set value up to L+9 or R+9]
You can freely adjust bass and treble according to dierent types of music and your personal
listening preferences.
① Press theHIGHorLOWButtonin theEQarea.[LED DISPLAY: HI or LO]
② Press the ▲ or ▼ Buttonof theVOLarea to adjust the bass or treble.[LED display: increase
from the current value up to +6 or decrease down to -6]
You can choose the most suitable among the three 3D modes available (Stereo, Live, Movie) to
suit dierent types of audio content
① Press the3Dbutton on the remote control: the LED display will show the currently set mode.
[LED display: STEREO/LIVE/MOVIE]
② Press the3Dbutton to switch between the modes.
You can freely adjust the volume of the subwoofer.
① Press theSUBbuttonon the remote control.[LED display: SUB]
② Press the ▲ or ▼ buttonin theVOLarea to adjust the volume of the subwoofer.[LED display:
from the current value up to +6 or down to -12]
You can freely adjust the volume of the Zone 2 Speakers.
① Press theZone 2buttonon the remote control.[LED display: Z2]
② Press the ▲ or ▼ buttonin theVOLarea to adjust the volume of the Zone 2 Speakers.[LED
display: from the current volume up to 0 or down to -12]**
In Bluetooth and Wi-Fi modes, you can operate the Play/Pause and Next/Previous playback
controls on the remote.
Attention:If you switch audio source during playback, the speakers will receive the audio signal
from the next source and reproduce it right away. Switching source will not pause the previous
audio source. If you want to pause the playback of the previous audio source, please operate
through the interface of the source itself.
Audio source switching
Volume adjusting
Left and right channel balance adjusting
Bass and treble adjusting
Switching between the sound modes
Subwoofer volume adjustment
Zone 2 Speakers volume adjustment (if any)
Playback control
Input Bluetooth Optical USB-C Wi-Fi Coaxial 3.5 mm jack
Button BT OPT USB WIFI COA AUX
LED display BT OPT USB WiFi COA AUX
Remote control Remote Control
Balance
Mute
SUB Vol Control
Treble/Bass Eq.
Zone 2 Volume
3D Listening Modes
ON/OFF
Volume
BT Pairing
Source
Playback
18 19
① Locate the WIFI button on the remote control and theWPSbutton on the back of the Main
Speaker and press them in sequence.
You will hear the “Entering setup mode” and “Follow the instructions in the app to finish the setup”
notications.
② Connect your mobile device to your home Wi-Fi network
③ Open the C&P Connect app
④ The description in the centre of the screen will let you know theName of the current Wi-Fi
network, tap "Add device" below.
Pairing
Connecting M6 to your Wi-Fi network
Unpairing
You can pair M6 with a Bluetooth-enabled audio device such as your smartphone, tablet or
laptop.
You can connect multiple M6 systems installed in dierent rooms through the Wi-Fi network.
The mobile devices under the same network can remotely control the systems through the C&P
Connect app. You can set the systems to play the same track simultaneously or dierent tracks
individually;In addition, you can answer calls or perform other activities on the mobile devices at
the same time: the music reproduction will not be interrupted.
Download and install the C&P Connect app
① Press theBTbuttonin theSOURCEarea of the remote control.[LED display: BT].
② Press thePairingbuttonabove theBTbuttonto put M6 into the Bluetooth pairing mode.[LED
display: pairing symbol].
③ Make sure that Bluetooth is enabled on the device.
Attention:This is usually found in the device's Settings menu.
④ Select "CnP M6 BT" from the "List of available Bluetooth devices" on the device.
⑤ Successful pairing.
⑥ Now you can stream your music wirelessly via Bluetooth.
Attention:You can pair any Bluetooth-enabled device with M6. After the rst time, you simply
need to tap on the M6 unit in the Bluetooth devices list: you won't need to go through the
pairing process again;However, at most two devices can be connected to M6 at the same
time. When M6 is already connected to two devices, other devices will no longer be able to
connect to M6.
※ If pairing or connection is unsuccessful, there may be already two devices connected to M6.
If this is the case, press thePairingbuttonagain to re-enter pairing mode and disconnect all the
devices.
① Access the list of available Bluetooth devices on the device.
② Tap the settings icon on the right of the "CnP M6 BT" name.
③ Tap "Unpair" or "Forget this device".
iOS Android
Bluetooth Wi-Fi
Indice
