Celleden STB-2881 Manuale utente

Stereo

Headset

User’s Guide

STB-2881

Bluetooth

Made in China

www.celleden.com

Http://www.celleden.com

Introduction

The Celleden STB-2881 Bluetooth Stereo Headset is a new concept inwireless

connectivity. Using Bluetooth v1.2, the STB-2881 delivers great stereo

sound via a robust and secure Bluetooth connection. The STB-2881 works

with any Bluetooth enabled device that supports the headset profile,the

handset profile, or the A2DP profile forstreaming stereo audio. This makes

the STB-2881 compatible with cellphones, PCs/laptops, PDAs,even MP3/MP4

players. If you have a cellphone thatsupports streaming audio, you can

listen to your tunes without worry -incoming calls will be routed to the

headset automatically. Once thecall is finished the music will comeback

on, so you won't miss a thing.

This package contains the following:

The accessories may be subject to change for

the sake of product improvement.

Changes may be made without prior notice.

Main unit User's Guide

User's

guide

User's

guide

2Contents

USB Extension Cable Quick Guide

Specifications:

Technical Specifications

Compliance: Bluetooth version 1.2 Class 2 6 ~ 4dB

Frequency range: 2.4-2.48 GHz

Speaker output: < 90 dB

Talk time: about6 hours

Music playing time: about 6 hours

Standby time: 80 hours

Supported profiles: Headset, Handsfree, and A2DP

Weight: 25g

Dimensions(LxWxH): 80 x 24 x 8mm

Features:

1. Talk button---

Multi-function control key

2. DC jack --- Used for charging

3. Neck strap

4. LED indicator --- Status check

5. Microphone

6. Ear phone

7. Vol+ key

8. Vol- key

Operating Instructions:

Charging

Use the USB cable included in thepackage to connect the STB-2881 with

your PC/laptop. Charging will start automatically whenthe headset is

connected and the red indicator light willturn on. It will then turn off

when charging is completed.

Wearing the headset

See diagram

Note: Make sure you

charge the unit for at

least 3 hours before

first use.

Power on/off

Power on

Press and hold the multi-function control keyfor about 4 seconds

until the blue LED indicator starts flashingor a tone is heard from

the headset. Now the headset is onand in Standby mode.

Note: The red LED indicator will beflashing

when the battery is low

Operating Instructions:

4 seconds

Power on/off

Power off

Press and hold the multi-function control keyfor about 2 seconds until

the red LED indicator flashes or atone is heard from the headset. The

headset is now off.

Operating Instructions:

Pairing

"Pairing" means creating a trusted relationshipbetween two or more

Bluetooth devices. The devices must be paired beforethey can

communicate with each other. Pairing identification is stored for later

use, and the devices will automatically recognizeeach other the next

time they are connected.

Note: Before use, the STB-2881 must bepaired with another

Bluetooth enabled device. The STB-2881 can save upto 7 device

IDs in memory, althoughit can communicate with only one device

at a time. The 7 IDs willbe stored in the device list byorder. When

more than 7 devices are paired withthe unit, the oldest one will

be deleted. The headset can only automaticallyconnect with the

most recently paired device.

See diagram on the following page.

1. Place the STB-2881 within 30 cmof the device to be paired with.

Operating Instructions:

2 seconds

2. While the STB-2881 is off,

press and hold the multi-function

control key for about 6 seconds,

until the red and blue LEDs flash

alternately. The STB-2881 will

now be in Pairing mode.

3. Initiate the Bluetooth search function

in the device to be paired

with, such as a mobile phone or PC/laptop. Please refer tothe user's

manual of the device for more information.

4. Select “STB-2881”in the device list and follow the instructions to

proceed.

5. Follow the instruction to enter pairing code“1234”. The red LED

indicator will stop flashing if pairing is successful. STB-2881's device

ID will be stored in the device list ofthe Bluetooth device so that no

pairing will be required for the next use.

Operating Instructions:

Volume adjustment

Press the Vol+ button to increasethe volume. A tone will be heardfrom

the headset to indicate that the levelhas been changed. A separate tone

will be heard when the unit isat maximum volume.

Press the Vol- button to decreasethe volume. A tone will be heardfrom

the headset to indicate that the levelhas been changed. A separate tone

will be heard when the unit isat minimum volume.

Operating Instructions:

Low High

6 seconds

Stereo Music

After pairing with a Bluetooth device that supports the A2DP profile,

such as a PC, MP3 player orcellphone, the music output of those devices

will be be transmited to the STB-2881.

Answering/Ending phonecalls

After pairing with Bluetooth enabled cell phones, the music play will

be paused when there is an incomingcall. A beep tone will also be

heard to notify that there is anincoming call. Press the multi-function

control key once to answer the calland press it once again to endthe

call. The music play will now beresumed when the call is ended. Ifthe

call is ended from the other side,music play will automatically be resumed.

Note: Automatic switching between phonecallsand music play

function is not supported by Sony EricssonT series cellphones.

Operating Instructions:

Status TALK Vol+ Vol-

Press and

hold

Press

briefly Press and

hold

Press

briefly Press and

hold

Press

briefly

Power on

(around

4 secs)

Enter

pairing

mode

(around

6 secs)

Power

Off

function No

function

Standby Last

number

redial

No function

for Sony

Ericsson

Last

number

redial

No function

for Sony

Ericsson

Vol+ Vol-

No function

for Sony

Ericsson

No function

for Sony

Ericsson

Voice

activated

dial

Power off

(around

2 secs)

Cancel

pairing

Pairing Power off No

function No

function

Cancel

Voice

Activated

Dial

Voice

Activated

Dial

Power off No

function No

function

Status TALK Vol+ Vol-

Press and

hold

Press

briefly Press and

hold

Press

briefly Press and

hold

Press

briefly

Power off

for Sony

Ericsson

Reject call

Answer

call

Incoming

call

function No

function

Answer call

for Sony

Ericsson

function

Answer call

for Sony

Ericsson

During a

call

End call Power off Volume

up Mute Volume

Down Mute

Operating Instructions:

The voice activated dialing function only works withcellphones that

support this function. Please refer to the user’s manual of your cellphone

regarding this issue.

Low-power prompt

The red LED will flash and a beep sound will be heard from the unit

when the power level is low. Please recharge the unit or the unit will

turn off by itself.

14 Important information

(Note: Please read all this information before using the STB-2881

Bluetooth Stereo Headset)

1. Check for any exceptions or rules, due to national/local requirements or

®®

limitations, in usage of this Bluetooth Stereo Headset or any other Bluetooth

devices.

2. Check also the laws and regulations on the use of mobile phones and

handsfree equipment in the areas where you drive.

3. Please note that only authorized Celleden dealers or service partners should

remove and/or replace the rechargeable battery, or any other components.

4. Please use Celleden original accessories only. Use of non-Celleden original

accessories may result in damage, loss of performance to the headset,

injury, electric shock or even fire.

5. Please do not expose the Stereo Headset to extreme high or low temperatures,

moisture or fluid.

6. Please do not drop, throw or bend the Stereo Headset as rough treatment will

damage it .

7. If the Stereo Headset will not be used for a while, please store it in a place

where it is dry, free from dust, and not prone to extreme temperature

fluctuations.

8. RF frequency and energy may affect some electronic systems in a motor

vehicle. Please check with the manufacturer to ensure that the headset

will not affect the electronic systems in the motor vehicle.

9. Some medical electronic equipment may not be shielded from RF energy.

Therefore, please do not use the headset near medical equipment without

permission.

Important information

10. Please turn off the Stereo Headset before boarding any aircraft. To prevent

any interference with communication systems, please do not use the

Stereo Headset while the plane is in the air.

11. Please turn off the Stereo Headset in any area with a potentially explosive

atmosphere.

12. Please do not allow children to play with the Stereo Headset since it contains

small parts.

13. Please do not expose the rechargeable battery to extreme temperatures.

If the battery is used at low temperature , the battery capacity will be

reduced.

14. The rechargeable battery has a long life if treated properly.

Note: The Stereo Headset is connected to a mobile phone or other electronic

devices using radio frequency signals which cannot guarantee connection

under all conditions or circumstances. Therefore, please never rely solely

upon the headset for essential or emergency communications.

Changes or modifications to this unit not expressly approved by

the party responsible for compliance will void the user's authority

to operate the equipment. Any change to the equipment will

void FCC grant.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different

Warning

Indice

Altri manuali Celleden Cuffia

Celleden

Celleden ADB-2381 Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente