Celltronix BT1000 Manuale utente
- 1 -
Bluetooth
Bluetooth
Bluetooth
Bluetooth
®
®
®
®
Headset
Headset
Headset
Headset BT1000
BT1000
BT1000
BT1000
- 2 -
1.
1.
1.
1. Notice
Notice
Notice
Notice Before
Before
Before
Before Using
Using
Using
Using
Thank you for purchasing the Celltronix ® Bluetooth ®
Headset BT1000 . Please check the contents of this package
to verify the items listed below have been included in your
package.
Please read this User's Manual completely before you use
the Headset. The BT1000 has been developed using
Bluetooth ® wireless technology and is capable of
connecting with Bluetooth ® d e vices designed with Audio
Gateway . PDAs, Desktop and Notebook computers can be
connected and paired with the Headset using a USB
Bluetooth ® Dongle. Before using the Headset please verify
your Bluetooth ® device (Phone, PDA) complies with
Bluetooth ® V 1.1/V1.2/V2.0/ V 2.1 and supports the
Bluetooth ® Headset or Hands-free profile.
- 3 -
2.
2.
2.
2. Package
Package
Package
Package Contents
Contents
Contents
Contents List
List
List
List
Please inspect this package and refer to the package
contents list below to verify all items were included in this
package:
A. BT1000 Bluetooth ® headset............................. ... ...........1
B. AC Travel Charger........................................ ... ......... . .. .....1
C. DC Car Charger................................................. ... .. . .........1
D. USB Charging Cable......................................... ... ... . ........1
E. User's Manual...................................................... . .. . .......1
F.
Ear Pad (Large and Small).................................. ... .... . . . ....2
- 4 -
3.
3.
3.
3. BT1000
BT1000
BT1000
BT1000 Bluetooth
Bluetooth
Bluetooth
Bluetooth ®
®
®
® Headset
Headset
Headset
Headset Overview
Overview
Overview
Overview
- 5 -
4.
4.
4.
4. Battery
Battery
Battery
Battery information
information
information
information
The device is equipped with an integrated lithium-polymer
battery. The battery cannot be replaced. Do not attempt to
remove the battery from the device since it would damage
the device. The full performance of a new battery is not
achieved until after two or three complete
cha rging-discharging cycles. The battery can be charged and
discharged several hundred times, but it looses its capacity
over time.
Disconnect the BT 1000 from the power supply as soon as
the battery is fully charged, since overcharging would
reduce the service life of the battery. A charged battery
looses its capacity if it is not used.
Important: Ensure that the battery is fully charged if you do
not use the device for a longer period of time.
To
avoid a
complete discharge of the battery, the BT 1000 should be
charged at least every 3 months.
- 6 -
5.
5.
5.
5. Charging
Charging
Charging
Charging the
the
the
the battery
battery
battery
battery
The BT 1000 is operated with a rechargeable battery. Charge
the battery completely before its first use. Read the section
"Battery information" before starting the charging process.
1) Connect the charger to the correct outlet.
2) When the charger is connected to the headset, the red
indicator light will turn on. Charging the battery fully
may take up to 2 hours.
3) When the battery is fully charged, the red indicator
light will turn blue . Disconnect the charger from the
headset and the wall outlet. The headset is ready to
use.
NOTE:
- For first time use, please charge the headset fully.
- The fully charged battery has power for up to 2 7 hours of
talk-time or up to 75 0 hours of standby time. However, the
talk and standby times may vary when used with different
- 7 -
mobile phones or other compatible Bluetooth ® devices,
usage settings, usage styles, and environments. When the
battery power is low, the headset will remind you by "B eep "
tone every 20 seconds, and the red indicator light starts to
flash.
- For using the BT1000 with iPhone or Blackberry, a
additional battery meter feature will be activated, the
remaining battery capacity will display on your phone.
6.
6.
6.
6. Pair
Pair
Pair
Pair to
to
to
to your
your
your
your Bluetooth
Bluetooth
Bluetooth
Bluetooth ®
®
®
® phone
phone
phone
phone
Before you use your headset the first time, you must pair
- 8 -
the unit with a Bluetooth ® enabled mobile phone. Pairing is
a one-time process and required only for the first
connection with the cell phone The BT 1000 can be paired
with up to eight cell phones and be connected
simultaneously with two cell phones.
- Hold the BT1000 within range of a Bluetooth ® -ready cell
phone;
- the distance should not exceed a mete
r
.
- The BT1000 must be turn ed off .
- Press the On/Off button for approx. 5 seconds until you
hear a short-low signal tone and the indicator light
intermittently flashes red and blue. The device is in pairing
mode. For first time use, when turn on the headset then
enter the paring mode automatically.
- Activate the Bluetooth ® function of the cell phone and
start the search for Bluetooth ® devices. (For further details,
please read the operating instructions of your cell phone).
- 9 -
- From the list of devices found, select the " BT1000 ".
- If required, enter the PIN code "0000" and confirm the
entry. If the pairing process was successful, you will hear a
signal tone and the indicator lights blue for 3 seconds. (Note:
The PIN code is preprogrammed and cannot be changed.)
- After pair ing, the BT1000 automatically connects with the
cell phone. For some cell phones, you have to manually
confirm the connection. Next, the BT 1000 changes to
standby mode and the indicator light flashes blue every 10
seconds.
Note: If the pair ing is not completed within 2 minutes, the
BT 1000 turn s off again. In this case, repeat the pair ing
procedure .
7.
7.
7.
7. Multi-connection
Multi-connection
Multi-connection
Multi-connection function
function
function
function
The multi-connection function allows the simultaneous use
of the BT1000 with two cell phones. This is advantageous
for users with a personal and a business cell phone.
- 10 -
Establishing
Establishing
Establishing
Establishing a
a
a
a connection
connection
connection
connection with
with
with
with two
two
two
two cell
cell
cell
cell phones
phones
phones
phones
There are several options of connecting the BT1000 with
already paired cell phones.
- Automatic connection
When turn ing on the BT1000 , a connection is automatically
established with the two most recently connected cell
phones.
- Establishing a connection via the BT1000
To
manually establish a connection between the BT1000
and the two most recently connected cell phones, press the
On/Off button. The BT1000 fi r st connects itself with the
most recently connected cell phone. Then it connects itself
with the next most recently connected one.
- Establishing a connection via the cell phone
If the cell phone is not one of the two most recently
connected cell phones with the BT1000 , you have to
establish the connection via the Bluetooth ® menu of the
Indice
Altri manuali Celltronix Cuffia
