Central Machinery 93507 Manuale utente

7” X 12”

METAL CUTTING BANDSAW

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

any artwork contained herein may be reproduced in any shape or form without the express

written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Model 93507

SKU 93507 For technical questions, please call 1-800-444-3353. Page 2

Contents

PRODUCT SPECIFICATIONS .....................................................................3

GENERAL SAFETY RULES........................................................................3

SPECIFIC SAFETY RULES.........................................................................6

GROUNDING ...............................................................................................8

UNPACKING ..............................................................................................11

ASSEMBLY INSTRUCTIONS ....................................................................11

A - ATTACH THE WHEELS ......................................................................................11

B - REMOVE THE SHIPPING BOLT ........................................................................12

C - ATTACH THE PULLEY COVER..........................................................................12

D - ATTACH THE TOOL STOP ROD AND BLOCK..................................................13

E - INSTALL THE COOLANT TANK.........................................................................13

WIRING INSTRUCTIONS.........................................................................................14

OPERATING INSTRUCTIONS...................................................................15

SELECTING PROPER BLADE SPEEDS: ...............................................................15

USING THE QUICK VISE: ........................................................................................15

ADJUSTING THE QUICK VISE FOR AN ANGLE CUT: ..........................................16

ADJUSTING THE STOP BLOCK:............................................................................16

CONVERTING THE BANDSAW FOR VERTICAL USE: ..........................................17

ADJUSTING THE BLADE GUIDE BEARINGS:.......................................................17

ADJUSTING THE BLADE TRACKING:....................................................................18

ADJUSTING THE BLADE TENSION: ......................................................................19

ADJUSTING THE FEED RATE: ...............................................................................19

ADJUSTING THE BLADE GUIDE BRACKETS:......................................................20

BASIC BANDSAW OPERATION -- VERTICAL POSITION: ....................................20

BASIC BANDSAW OPERATION -- HORIZONTAL POSITION:...............................22

INSPECTION, MAINTENANCE, AND CLEANING....................................24

TROUBLESHOOTING ...............................................................................29

PARTS LIST ...............................................................................................30

ASSEMBLY DIAGRAM ..............................................................................32

SKU 93507 For technical questions, please call 1-800-444-3353. Page 3

PRODUCT SPECIFICATIONS

Electrical Requirements 120/230 VAC (Dual voltage capability)

Motor Type: 1 HP /Single Phase

60 Hz / 1720 RPM

9 Amps @ 120 Volt

4.5 Amps @ 230 Volt

Power Cord Type & Length Provided: 120 volt / 6’4” Long

Power Cord Plug Type Provided: 120 volt, 3-Prong

Overload Equipped: Resettable Circuit Breaker

Cutting Capacity 7” (Round Stock) 7” x 12” (Flat/Square Stock)

Blade Speeds (FPM) 260 / 178 / 132 / 86

Required Blade Size ¾” Wide x .032” Thick x 93” Long (Included)

Required V-Belt Size 3V-270 (Included)

Vise Capacity/Miter Angles 10-1/2” / 0-45 Degrees in 1 Degree Increments (Right Only)

Throat Depth 9-5/8”

Coolant Pump 120 VAC / 60 Hz / 0.6 Amps

Coolant Tank Capacity 9 Quarts

Overall Dimensions 15-1/2” Long x 46-1/2” Wide x 62-7/8” High

Net Weight 312 Pounds

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, oper-

ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.

Keep your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, ﬁre, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

Do not operate power tools in explosive atmospheres, such as in the pres-

ence of ﬂammable liquids, gases, or dust. Power tools create sparks which may

ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control. Protect others in the work area from

debris such as chips and sparks. Provide barriers or shields as needed.

SKU 93507 For technical questions, please call 1-800-444-3353. Page 4

ELECTRICAL SAFETY

Grounded tools must be plugged into an outlet properly installed and grounded

in accordance with all codes and ordinances. Never remove the grounding

prong or modify the plug in any way. Do not use any adapter plugs. Check with

a qualiﬁed electrician if you are in doubt as to whether the outlet is properly

grounded. If the tools should electrically malfunction or break down, grounding

provides a low resistance path to carry electricity away from the user.

Double insulated tools are equipped with a polarized plug (one blade is wider

than the other). This plug will ﬁt in a polarized outlet only one way. If the plug

does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact

a qualiﬁed electrician to install a polarized outlet. Do not change the plug

in any way. Double insulation eliminates the need for the three wire grounded

power cord and grounded power supply system.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges,

and refrigerators. There is an increased risk of electric shock if your body is

grounded.

Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

Do not abuse the Power Cord. Never use the Power Cord to carry the tools or

pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp

edges, or moving parts. Replace damaged Power Cords immediately. Dam-

aged Power Cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked

“W-A” or “W”. These extension cords are rated for outdoor use, and reduce the

risk of electric shock.

PERSONAL SAFETY

Stay alert. Watch what you are doing, and use common sense when operat-

ing a power tool. Do not use a power tool while tired or under the inﬂuence

of drugs, alcohol, or medication. A moment of inattention while operating power

tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long

hair. Keep your hair, clothing, and gloves away from moving parts.

Loose clothes, jewelry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure the Power Switch is off before plugging

in. Carrying power tools with your ﬁnger on the Power Switch, or plugging in power

tools with the Power Switch on, invites accidents.

SKU 93507 For technical questions, please call 1-800-444-3353. Page 5

Remove adjusting keys or wrenches before turning the power tool on. A

wrench or a key that is left attached to a rotating part of the power tool may result

in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper footing

and balance enables better control of the power tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, nonskid safety

shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

Use clamps (not included) or other practical ways to secure and support the

workpiece to a stable platform. Holding the work by hand or against your body

is unstable and may lead to loss of control.

Do not force the tool. Use the correct tool for your application. The correct

tool will do the job better and safer at the rate for which it is designed.

Do not use the power tool if the Power Switch does not turn it on or off. Any

tool that cannot be controlled with the Power Switch is dangerous and must be

replaced.

Disconnect the Power Cord Plug from the power source before making any

adjustments, changing accessories, or storing the tool. Such preventive safety

measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools

are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly main-

tained tools with a sharp cutting edge are less likely to bind and are easier to control.

Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

Check for misalignment or binding of moving parts, breakage of parts, and any

other condition that may affect the tool’s operation. If damaged, have the tool

serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may become hazardous

when used on another tool.

SERVICE

Tool service must be performed only by qualiﬁed repair personnel. Service or

maintenance performed by unqualiﬁed personnel could result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instruc-

tions in the “Inspection, Maintenance, And Cleaning” section of this manual.

SKU 93507 For technical questions, please call 1-800-444-3353. Page 6

Use of unauthorized parts or failure to follow maintenance instructions may create

a risk of electric shock or injury.

SPECIFIC SAFETY RULES

Maintain labels and nameplates on the Bandsaw. These carry important infor-

mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Always wear safety impact eye goggles and heavy work gloves

when using the Bandsaw. Using personal safety devices reduce the

risk for injury. Safety impact eye goggles and heavy work gloves are

available from Harbor Freight Tools. Heavy work boots, along with

other work clothing, are also recommended during use.

Maintain a safe working environment. Keep the work area well lit. Make sure

there is adequate surrounding workspace. Always keep the work area free of ob-

structions, grease, oil, trash, and other debris. Do not use a power tool in areas

near ﬂammable chemicals, dusts, and vapors. Do not use this product in a damp

or wet location.

Avoid unintentional starting. Make sure you are prepared to begin work before

turning on the Bandsaw.

Do not force the Bandsaw. This tool will do the work better and safer at the

speed and capacity for which it was designed. Do not force the Saw Blade into the

workpiece being cut.

WARNING! Keep hands and ﬁngers away from cutting area and Saw Blade.

Never leave the Bandsaw unattended when it is plugged into an electrical

outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

Make sure the Bandsaw is located on a ﬂat, level, sturdy surface capable of

supporting the weight of the Saw and workpieces. Always “chock” the Wheels

to prevent the Bandsaw from accidentally moving.

Make sure the Table of the Bandsaw and surrounding area are clear with the

exception of the workpiece to be cut.

Before using the Bandsaw, check to make sure the Saw Blade is properly

mounted and is not cracked or bent.

Industrial applications must follow OSHA guidelines.

Never stand on the Bandsaw. Serious injury could result if the Bandsaw is tipped

or if the rotating Saw Blade is accidently contacted.

Never attempt to cut more than one workpiece at a time.

10.

11.

12.

13.

SKU 93507 For technical questions, please call 1-800-444-3353. Page 7

Never attempt to cut freehand. Make sure the workpiece to be cut is pressed

ﬁrmly against the Table and/or secured in the Vise.

When cutting a large workpiece, make sure its entire length is properly sup-

ported. If necessary, use a roller stand (not included).

Do not lean on the Bandsaw when the tool is in its upright position.

When moving the Bandsaw, always have its Head lowered to its horizontal

position.

Allow the Saw Blade to rotate to full speed before feeding a workpiece into

the Blade. When turning off the Bandsaw, allow the Saw Blade to spin down and

stop on its own. Do not press against the Saw Blade to stop it.

To avoid accidental injury, always wear heavy duty work gloves when chang-

ing the Saw Blade.

The Saw Blade will become hot while cutting. Allow the Saw Blade to completely

cool before handling.

Do not force the workpiece into the Saw Blade when cutting. Apply moderate

pressure, allowing the Saw Blade to cut without being forced.

Turn off the Bandsaw and allow the Saw Blade to completely stop if the Saw

Blade is to be backed out of an uncompleted cut.

Never attempt to remove material stuck in the moving parts of the Bandsaw

while it is plugged in and running.

Make sure the workpiece to be cut off has sufﬁcient room to move sideways.

Failure to do so may result in offcut binding against the Saw Blade.

Always unplug the Bandsaw from its electrical outlet before performing any

inspection, maintenance, or cleaning procedures.

Keep this product and all other tools and equipment away from children and

animals. Do not allow spectators in the work area.

Keep all safety guards in place and in proper working order.

This Bandsaw is designed for indoor use only.

WARNING! Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities, contain chemicals known (to the State of Califor-

nia) to cause cancer, birth defects or other reproductive harm. Some examples of

these chemicals are: lead from lead-based paints, crystalline silica from bricks and

cement or other masonry products, arsenic and chromium from chemically treated

lumber. Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well ventilated

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

SKU 93507 For technical questions, please call 1-800-444-3353. Page 8

area, and work with approved safety equipment, such as those dust masks that

are specially designed to ﬁlter out microscopic particles. (California Health & Safety

Code § 25249.5, et seq.)

WARNING! People with pacemakers should consult their physician(s) before

using this product. Operation of electrical equipment in close proximity to a heart

pacemaker could cause interference or failure of the pacemaker.

WARNING! The warnings and cautions discussed in this manual cannot cover

all possible conditions and situations that may occur. It must be understood by the

operator that common sense and caution are factors which cannot be built into this

product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

GROUNDING

WARNING!

Improperly connecting the grounding wire can result in the risk of electric shock.

Check with a qualiﬁed electrician if you are in doubt as to whether the outlet is

properly grounded. Do not modify the power cord plug provided with the tool.

Never remove the grounding prong from the plug. Do not use the tool if the

power cord or plug is damaged. If damaged, have it repaired by a service facil-

ity before use. If the plug will not ﬁt the outlet, have a proper outlet installed by

a qualiﬁed electrician.

GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS

Tools marked with “Grounding Required” have a three wire cord and three prong

grounding plug. The plug must be connected to a properly grounded outlet. If

the tool should electrically malfunction or break down, grounding provides a low

resistance path to carry electricity away from the user, reducing the risk of electric

shock. (See Figure A.)

The grounding prong in the plug is connected through the green wire inside the

cord to the grounding system in the tool. The green wire in the cord must be the

only wire connected to the tool’s grounding system and must never be attached to

an electrically “live” terminal. (See Figure A.)

30.

31.

SKU 93507 For technical questions, please call 1-800-444-3353. Page 9

Your tool must be plugged into an appropriate outlet, properly installed and grounded

in accordance with all codes and ordinances. The plug and outlet should look like

those in the following illustration. (See Figure A.)

FIGURE A FIGURE B

DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS

Tools marked “Double Insulated” do not require grounding. They have a special

double insulation system which satisﬁes OSHA requirements and complies with

the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard

Association, and the National Electrical Code. (See Figure B.)

Double insulated tools may be used in either of the 120 volt outlets shown in the

preceding illustration. (See Figure B.)

EXTENSION CORDS

Grounded tools require a three wire extension cord. Double Insulated tools can

use either a two or three wire extension cord.

As the distance from the supply outlet increases, you must use a heavier gauge

extension cord. Using extension cords with inadequately sized wire causes a seri-

ous drop in voltage, resulting in loss of power and possible tool damage.

(See Figure C, next page.)

The smaller the gauge number of the wire, the greater the capacity of the cord. For

example, a 14 gauge cord can carry a higher current than a 16 gauge cord.

(See Figure C.)

When using more than one extension cord to make up the total length, make sure

each cord contains at least the minimum wire size required. (See Figure C.)

If you are using one extension cord for more than one tool, add the nameplate am-

peres and use the sum to determine the required minimum cord size.

(See Figure C.)

If you are using an extension cord outdoors, make sure it is marked with the sufﬁx

“W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

THIS PRODUCT

USES A

3-PRONG PLUG

SKU 93507 For technical questions, please call 1-800-444-3353. Page 10

Make sure your extension cord is properly wired and in good electrical condition.

Always replace a damaged extension cord or have it repaired by a qualiﬁed electri-

cian before using it.

Protect your extension cords from sharp objects, excessive heat, and damp or wet

areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120 OR 240 VOLT)

NAMEPLATE

AMPERES

(at full load)

EXTENSION CORD LENGTH

25 Feet 50 Feet 75 Feet 100 Feet 150 Feet

0 – 2.0 18 18 18 18 16

2.1 – 3.4 18 18 18 16 14

3.5 – 5.0 18 18 16 14 12

5.1 – 7.0 18 16 14 12 12

7.1 – 12.0 18 14 12 10 -

12.1 – 16.0 14 12 10 - -

16.1 – 20.0 12 10 - - -

FIGURE C * Based on limiting the line voltage drop to ﬁve volts at 150% of the rated amperes.

SYMBOLOGY

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

V~ Volts Alternating Current

AAmperes

n0xxxx/min. No Load Revolutions per Minute (RPM)

Indice

Altri manuali Central Machinery Sega

Central Machinery

Central Machinery 92658 Manuale utente

Central Machinery

Central Machinery 63469 Istruzioni per il montaggio

Central Machinery

Central Machinery 60564 Istruzioni per il montaggio

Central Machinery

Central Machinery 45804 Manuale utente

Central Machinery

Central Machinery 93762 Manuale di installazione

Central Machinery

Central Machinery 32208 Manuale di installazione

Central Machinery

Central Machinery 62519 Istruzioni per il montaggio

Central Machinery

Central Machinery 97099 Manuale di installazione

Central Machinery

Central Machinery 93380 Manuale utente

Central Machinery

Central Machinery 41311 Manuale utente

Central Machinery

Central Machinery 93012 Istruzioni per il montaggio

Central Machinery

Central Machinery 91815 Manuale utente

Central Machinery

Central Machinery 93012 Manuale utente

Central Machinery

Central Machinery 93762 Istruzioni per il montaggio

Central Machinery

Central Machinery 94652 Manuale utente

Central Machinery

Central Machinery 97896 Manuale utente

Central Machinery

Central Machinery 66435 Manuale di installazione

Central Machinery

Central Machinery 67595 Manuale di installazione

Central Machinery

Central Machinery 95112 Manuale elenco delle parti

Central Machinery

Central Machinery 90597 Manuale utente

Central Machinery

Central Machinery 04333 Manuale utente

Central Machinery

Central Machinery 93491 Manuale utente

Central Machinery

Central Machinery 46813 Manuale utente

Central Machinery

Central Machinery 94443 Manuale utente

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente