Centsys D5-Evo Manuale utente
D5-Evo installation manual
TM
LIGHT-
INDUSTRIAL
SLIDING GATE
OPERATOR
Mechanical Setup
Electrical Setup
Commissioning and Handover
1. Declaration of conformity
2. General description
Lightning protection
Theft protection
3. Specifications
Physical dimensions
Technical specifications
Fuse protection
4. Icons used in this booklet
5. Product identification
6. Required tools and equipment
7. Preparation of site
8. Cabling requirements
9. Lubrication
10. Operator installation
11. Electrical setup
12. Wiring diagram for closing safety beam
13. Wiring diagram for opening safety beam
14. Wiring diagram for external radio receiver and loop detector
15. Wiring diagram for other inputs
16. Mains supply, battery, charger and pillar light connections
17. Earthing for effective lightning protection
18. Commissioning the system
Setting the gate limits
19. How to set up additional features on the D5-Evo controller
20. Menu navigation map
21. Controller features
22. Factory defaults schedule
23. Description of terminal functions
24. Diagnostics
Diagnostic LEDs
Gate status LED
LCD display
Buzzer feedback
25. Fault-finders guide
26. Manual operation
Manual release operation
Manual release latching
27. Installation Handover
Contents
IMPORTANT SAFETY INSTRUCTIONS
page 5
page 6
page 6
page 6
page 7
page 7
page 7
page 8
page 8
page 9
page 10
page 11
page 14
page 15
page 16
page 28
page 29
page 30
page 31
page 32
page 33
page 34
page 35
page 35
page 36
page 37
page 40
page 51
page 53
page 56
page 56
page 56
page 57
page 58
page 59
page 63
page 63
page 63
page 64
page 1
page 2
page 2
page 3
Mechanical setup
Heed necessary site considerations page 11
Check cabling requirements page 14
Gather required tools and equipment page 10
Secure foundation plate page 19
Add oil to gearbox page 15
Mount gearbox page 20
Mount rack page 21
Mount origin marker page 25
Apply warning decals page 27
These abbreviated instructions are for the experienced
installer who needs a checklist to get a standard installation
up and running in the minimum of time.
Detailed installation features and functions are referred to
later in this manual.
page 1
Connect all wiring
step
10
Electrical setup
page 2
step
11
Set gate end-of-travel limits
step
13
Carry out professional
handover to client
Commissioning
and handover
step
12
Set additional features via the
menus, if required
page 35
page 36
page 64
page 28
Warnings for the installer
CAREFULLY READ AND FOLLOW ALL INSTRUCTIONS
before beginning to install the product.
All installation, repair, and service work to this product must
be carried out by a suitably qualified person
Do not activate your gate opener unless you can see it and can
determine that its area of travel is clear of people, pets, or
other obstructions
NO ONE MAY CROSS THE PATH OF A MOVING GATE.
Always keep people and objects away from the gate and its
area of travel
NEVER LET CHILDREN OPERATE OR PLAY WITH THE
GATE CONTROLS
Secure all easily accessed gate opener controls in order to
prevent unauthorized use of the gate
Do not in any way modify the components of the automated
system
Do not install the equipment in an explosive atmosphere: the
presence of flammable gasses or fumes is a serious danger to
safety
Before attempting any work on the system, cut electrical
power to the operator and disconnect the batteries
The mains power supply of the automated system must be
fitted with an all-pole switch with contact opening distance of
3mm or greater. Use of a 5A thermal breaker with all-pole
circuit break is recommended
Make sure that an earth leakage circuit breaker with a
threshold of 30mA is fitted upstream of the system
Never short circuit the battery and do not try to recharge the
batteries with power supply units other than that supplied
IMPORTANT
Safety Instructions
ATTENTION
To ensure the safety of people, it is important that you
read all the following instructions. Incorrect
installation or incorrect use of the product could
cause serious harm to people.
The installer, being either professional or DIY, is the
last person on the site who can ensure that the
operator is safely installed, and that the whole system
can be operated safely.
page 3
with the product, or by CENTSYS
Make sure that the earthing system is correctly constructed,
and that all metal parts of the system are suitably earthed
Safety devices must be fitted to the installation to guard
against mechanical movement risks, such as crushing,
dragging and shearing
It is recommended that at least one warning indicator light be
fitted to every system
Always fit the warning signs visibly to the inside and outside of
the gate
The installer must explain and demonstrate the manual
operation of the gate in case of an emergency, and must hand
the User Guide over to the user
Explain these safety instructions to all persons authorized to
use this gate, and be sure that they understand the hazards
associated with automated gates
Do not leave packing materials (plastic, polystyrene, etc.)
within reach of children as such materials are potential
sources of danger
Dispose of all waste products like packaging materials, worn
out batteries, etc. according to local regulations
Always check the obstruction detection system, and safety
devices for correct operation
Centurion Systems (Pty) Ltd does not accept any liability
caused by improper use of the product, or for use other than
that for which the automated system was intended
This product was designed and built strictly for the use
indicated in this documentation. Any other use, not expressly
indicated here, could compromise the service life/operation of
the product and/or be a source of danger
Everything not expressly specified in these instructions
is not permitted.
page 4
1. Declaration of conformity
page 5
Manufacturer:
Centurion Systems (Pty) Ltd
Unit 13 Production Park
Intersection Newmarket Road & Epsom Avenue
North Riding
Gauteng
South Africa
Declares that the product:
Product name: D5 Evo
Conforms with the following specifications:
Safety: SANS 60335-1:2007
IEC 60335-1:2006
Emissions: CISPR 22 CLASS B: Radiated emissions – 150KHz TO 6GHz
CISPR 22 CLASS B: Conducted emissions – 150KHz TO 6GHz
Immunity: IEC 61000-4-2 – Electrostatic discharge
IEC 61000-4-3 – Radiated immunity – 80MHz TO 1000MHz
IEC 61000-4-4 – Electrical fast transients/burst
IEC 61000-4-5 – Surges
IEC 61000-4-6 – Conducted immunity – 150KHz TO 80MHz
Standard to which conformity is declared:
IEC 60335-1:2006 Safety
IEC 61000-6-3:2006 Emissions
IEC 61000-6-1:2005 Immunity
Signed at North Riding, South Africa on June 21, 2010
Ian Rozowsky
Research & Development Director.
2. General description
page 6
The D5-Evo is a domestic and light-industrial operator designed to open and close sliding
gates weighing up to 500kg. A custom designed gearbox moulded from robust
engineering polymers, coupled to a powerful 12V DC motor, provides fast and reliable
automation for entrances to homes and small housing estates.
The system operates off a 12V battery housed inside the operator using a switch mode
charger to maintain the battery in a fully charged state. The battery provides critical
power failure protection. A solar supply can be used as an alternative energy source to
charge the battery.
Gate travel limits are managed by an opto-electronic system, comprising a gate mounted
origin magnet and an internal rotary encoder. This system yields precise and repeatable
control over gate position.
Advanced features of the D5-Evo logic controller include:
Interactive graphical user interface via a backlit LCD display
Automated setup of gate endpoints (limits)
Fail-safe collision detection and auto reverse (adjustable sensitivity)
Smooth, adjustable start/stop (ramp up/ramp down)
Multiple operational modes
Selectable, adjustable autoclosing
Pedestrian (partial) opening
Positive close mode
Independent safety inputs for opening and closing beams
Automatic beam test for both open and closing beams
Advanced beam alarm functions
Advanced lightning/surge protection
Timed courtesy light output
Multiple pre-flashing modes
Independently adjustable motor speed in both opening and closing directions
Onboard CENTSYS code-hopping radio receiver with full channel mapping capability
(limited to 500 buttons)
Onboard ChronoGuard timer (patent pending) for autoactivation of various physical
input and outputs and time-barring of the same inputs and output including remote
controls
Lightning Protection
The electronic controller utilizes the same proven surge protection philosophy that is
used in all CENTSYS products. While this does not guarantee that the unit will not be
damaged in the event of a lightning strike or power surge, it greatly reduces the
likelihood of such damage occurring. The earth return for the surge protection is provided
via the mains power supply earth and/or earth spike located next to the operator.
In order to ensure that the surge protection is effective, it is essential that the
unit is properly earthed.
Theft Protection
While care has been taken in the design of the D5-Evo to prevent unauthorized removal
(theft) of the unit, an optional steel theft-resistant cage is also available for added peace
of mind.
3. Specifications
Technical specifications
Physical dimensions
page 7
FIGURE 1 OVERALL DIMENSIONS
345mm
250mm 150mm 40mm
60mm
D5
220-240V AC ± 10%, 50Hz
12V DC
Battery driven (standard capacity - 1 x 7Ah)
2A @ 14.2V (charging voltage 13.76V)
170mA
10A
25.5kgf
17kgf
500kg
100m
18-22 m/min
Lockable door with key release
150
Input voltage
Motor voltage
Motor power supply
Battery charger
Current consumption (mains)
Current consumption (motor at rated load)
Operator push force - starting
Operator push force - rated
Gate mass - maximum
Gate length - maximum
Gate speed (varies with load)
Manual override
Maximum numbers of operations per day
page 8
Based on 4m gate, no accessories fitted, such as infrared beams
Fuse protection
The following protection fuses are provided on the system:
Item Type Rating
Main controller
Motor circuit Automotive fuse ATO (25 x 7mm) 30A
Light circuit 5 x 20mm 3A fast blow
Auxiliary supply Resettable fuse 3A
Charger
Mains input 5 x 20mm 3A fast blow*
*Not user serviceable
4. Icons used in this manual
This icon indicates tips and other
information that could be useful
during the installation.
This icon indicates warning, caution or attention! Please take special note of critical
aspects that MUST be adhered to in order to prevent injury.
This icon denotes variations and other
aspects that should be considered
during installation.
Duty cycle - mains present
Operations in standby with 7Ah battery
half day
full day
Operations in standby with 35Ah battery
half day
full day
Collision sensing
Operating temperature range
Onboard receiver type
Receiver code storage capacity
Receiver frequency
Mass of unit packed (standard kit, excl.
rack and battery)
Packing dimensions (standard kit, excl.
rack and battery)
50%
44
35
150*
150*
electronic
-15°C to +50°C
CENTSYS code-hopping multichannel
500 transmitter buttons
433MHz
10kg
231mm deep x 303mm wide x 432mm high
Limited by maximum daily usage
Based on a push force of less than 50% of rated
Altri manuali per D5-Evo
2
Indice
Altri manuali Centsys Apricancello
Centsys
Centsys D5-Evo Guida rapida
Centsys
Centsys D5-Evo Manuale utente
Centsys
Centsys D10 Turbo Manuale utente
Centsys
Centsys VECTOR2 Manuale utente
Centsys
Centsys D3 Manuale utente
Centsys
Centsys R3 Manuale utente
Centsys
Centsys A10 Manuale utente
Centsys
Centsys Vector2 400 Manuale utente
Centsys
Centsys A10 Manuale utente
