CENTURION SYSTEMS D5-EVO Manuale utente
D5-EVO THEFT-RESISTANT CAGE
KIT INSTALLATION MANUAL
THEFT-RESISTANT CAGE
Centurion Systems (Pty) Ltd
www.centsys.com
After-sales
multi-language
Technical Support
Monday to Friday
from 07h00 to 18h00
GMT+2
Saturdays
08h00 to 16h30 GMT +2
Manufactures to
international
quality standard
ISO 9001:2008
100%
testing of
products
In-house
R&D
development
team
Centurion Systems (Pty) Ltd reserves the right to make changes to the products described in this
manual without notice and without obligation to notify any persons of any such revisions or changes.
Additionally, Centurion Systems (Pty) Ltd makes no representations or warranties with respect to
this manual. No part of this document may be copied, stored in a retrieval system or transmitted in any
form or by any means electronic, mechanical, optical or photographic, without the express prior written
consent of Centurion Systems (Pty) Ltd.
1986 1990 1995 1999 Today
COMPANY PROFILE
Company prole
Sales and technical support
to Africa, Europe, Asia,
the Americas, Australia
and the Pacic
page 3
www.centsys.com
CONTENTS
Icons used in this manual
This icon indicates tips and other information that could be useful during the
installation.
This icon denotes variations and other aspects that should be considered during
installation.
This icon indicates warning, caution or attention! Please take special
note of critical aspects that MUST be adhered to in order to prevent
injury.
ATTENTION
To ensure the safety of people and possessions, it is important that you
read all the following instructions.
Incorrect installation or incorrect use of the product may cause
serious harm to people and / or property.
The installer, being either professional or DIY, is the last person
on the site who can ensure that the operator is safely installed, and that
the whole system can be operated safely.
IMPORTANT
SAFETY INSTRUCTIONS
Warnings for the installer
CAREFULLY READ AND FOLLOW ALL INSTRUCTIONS before beginning to install
the product.
• Do not in any way modify the components
• Do not leave packing materials (plastic, polystyrene, etc.) within reach of children as
such materials are potential sources of danger
• Neither Centurion Systems (Pty) Ltd, nor its subsidiaries, accepts any liability caused
by improper use of the product, or for use other than that for which the automated
system was intended
• This product was designed and built strictly for the use indicated in this
documentation. Any other use, not expressly indicated here, could compromise the
service life/operation of the product and/or be a source of danger
• The installer must explain the operation of the SECTOR Breakaway Coupler and
any safety hazards to the end-user – refer to section “Installation Handover”
• Anything not expressly specied in these instructions is not permitted
page 4
www.centsys.com
GENERAL DESCRIPTION
The CENTSYS Theft-resistant cage, is designed to signicantly reduce the risk of an
intruder gaining access to the operator and increases the resistance of the unit against
theft.
Disclaimer: Due to continuous improvement in the design and manufacture of this
product, the actual product may dier slightly in appearance to that which is depicted
herein. Centurion Systems (Pty) Ltd cannot be held liable under any circumstance for any
damage, loss or action that results from your gate operator being tampered with.
1. General Description
SECTION 1
FIGURE 1. THEFT-RESISTANT CAGE KIT
page 5
www.centsys.com
2. Product Identication
3. Required Tools
FIGURE 2. PRODUCT IDENTIFICATION
1
5
6
1. Theft-resistant cage overstrap
2. Closed-up mounting bracket
3. Mounting bracket
4. Discus padlock
5. Front bar
6. Padlock enclosure
1. Spanner – 17mm
2
3
4
PRODUCT IDENTIFICATION SECTION 2
page 6
www.centsys.com
SECTION 4
SITE CONSIDERATIONS
4. Fitting the padlock to the front bar
The padlock is supplied already tted to the front bar. In the event that it needs
to be retted, the following instructions detail the procedure for doing so.
FIGURE 3
FIGURE 5
FIGURE 7 FIGURE 8
FIGURE 4
FIGURE6
Unlock the discus padlock Locate the padlock enclosure on the front
bar
With the key in the lock, insert the discus
padlock through the opening from the
inside of the enclosure.
Turn the key clockwise to secure the
padlock in place.
Align the padlock with the hole, ensuring
that it is seated in the slot as shown in
Figure 4.
Ensure that the padlock remains in position
as shown in Figure 8.
page 7
www.centsys.com
Please take note of the
positioning of the mounting
brackets. They should be
placed as shown Figure 9.
SECTION 5INSTALLATION
5. Theft-resistant cage installation
IMPORTANT! For
magnetic origin operator
models, relocate gate
magnet as close as
possible to operator
cover and reset gate
Limits.
Remove the side covers to access
the mounting bolts
Remove the mounting nuts and
washers from the bolt using a 17mm
ring spanner.
Insert the mounting bracket facing
down as shown in Figure 11 before
placing them onto the base plate
FIGURE 9
FIGURE 10
FIGURE 11
page 8
www.centsys.com
SECTION 5
INSTALLATION
Lift the motor with the inserted
brackets and place over the
mounting bolts and fasten them
using the provided M10 washer and
M10 nut
FIGURE 12
With the brackets mounted in
position, insert and and align the
bracket strap in position as shown in
Figure 13.
Insert the front bar and discus
padlock assembly through the
mounting brackets and bracket strap
assembly. Lock the front bar into
position
FIGURE 13
FIGURE 14
Always unlock the discus
padlock before placing the
front bar into position
page 9
www.centsys.com
A nished installation should look
like Figure 15
FIGURE 15
SECTION 5INSTALLATION
page 10
www.centsys.com
SECTION 5RHS SURFACE MOUNT - SIMILAR DIRECTION OF TRAVEL
8. Installation handover
Notes
Once the Theft-resistant cage has been successfully installed and its operation tested,
it is important for the operation and safety considerations to be explained to the end-user
of the system.
INSTALLATION HANDOVER
SECTION 8
Altri manuali per D5-EVO
1
Indice
Altri manuali CENTURION SYSTEMS Serratura
