•Do not use any caustic substances to clean the sharpener.
•Do not use the unit or work on it within the proximity of flammable liquids or vapours.
•Protect the power cable from any dama e, includin acids or oils.
•Observe any and all national safety re ulations re ardin the installation, operation and
maintenance of this product.
•Upon completion of your sharpenin jobs, unplu the chainsaw sharpener from the mains power.
•Workin loves will protect your fin ers and skin from cuttin injuries durin use. Be sure to keep
your hands away from the rindin disk when it is movin .
•Store the unit in a location that is inaccessible to children.
•Always hold the unit with both hands when workin , and be sure you are standin with secure
footin on a stable surface.
Additional Safe Work Tips
•Keep your orkplace tidy.
A messy workplace may cause an accident.
•Al ays make allo ances for environmental effects and factors.
Do not expose the unit to rain, or use in a wet or moist location. Ensure there is sufficient li htin
and there are no flammable liquids or ases in the area.
•Prevent children from access.
Do not let other people touch the unit or the power cable. Prevent unauthorised people from
ainin access to the workin area.
•Store the unit in a safe location.
When not in use, the unit should be kept in a dry, elevated locked location, out of reach of children.
•Use the correct machine.
Do not use the unit for any purpose other than what it is intended for. Only use the unit as
described in the user manual.
•Wear proper clothing!
Do not wear any wide or loose arments or jewellery that may et cau ht in movin parts. For
workin outdoors, rubber loves and non-skid shoes are recommended. If you hair is lon , tie it up
or wear a hairnet. Use protective o les.
•Wear a breathing mask hen engaged in a dust-producing job.
•Do not use the cable for any purpose other than hat it is intended for.
Do not use the cable for carryin or han in the machine. Do not use the cable itself to pull the
plu out of the socket. Protect the cable from excessive temperatures, oil or sharp ed es.
•Avoid any abnormal posture.
Mind your safe footin and balance at all times.
•Take due care of the unit.
Abide by the maintenance and rindin disk replacement re ulations.
Check the power cable re ularly and when it is found to be dama ed, have it replaced by an
electrician. Check extension cables re ularly and replace them if dama ed.
Keep the handle dry, free of dirt, oil and rease.
•Unplug the machine hen not in use, prior to maintenance or hen replacing a grinding disk.
•Remove any spanners from the unit.
Before switchin on, check to see that any wrenches or adjustment tools have been removed.
•Be attentive and mind hat you are doing.
Never use the machine while you are distracted, after consumin alcohol or takin medication, or
under any other circumstances that may impact your ability to concentrate.
•Check the machine prior to use for any possible damage.
•Before using the unit, you should check any protective devices and any parts sho ing any slight
damage to see that the function intended is still available.
Check to see that movin parts are movin freely, do not dra and are not dama ed. Any parts
should be installed properly to comply with the conditions of the machines safe operation.
Parts should only be repaired in a professional workshop. Do not use the unit with a defective
ON/OFF switch.
3
