Certa CTINV35GENA Manuale utente

Warnings

•Exhaust contains poisonous carbon monoxide. Do not operate the generator in a

confined environment. Only use outdoors, away from open doors, windows or vents.

•The muffler becomes extremely hot during operation, and remains hot for a while after

stopping the engine. Be careful not to touch the muffler while it is hot. Let the engine

cool before storing the generator indoors.

•The engine exhaust system will be heated during operation and will remain hot

immediately after stopping the engine. To prevent scalding, pay attention to the warning

labels on the generator.

•Do not connect other cables to receptacles during use or use a special ack as it may

cause electric shock.

•Fuel is extremely flammable, and is even explosive under certain conditions. Refuel unit in

a ventilated area with the engine stopped.

•Keep away from cigarettes, smoke and sparks when refuelling the generator. Always

refuel in a well ventilated location.

•Connecting the unit to a building electrical system as a standby power source must be

performed by a qualified electrician. The connection must isolate the generator from

utility power, and must comply with all applicable laws and electrical codes. Improper

connections to a building's electrical system can allow electrical current from the

generator to backfeed into the utility lines. Such backfeed may electrocute utility

company workers or others who contact lines during a power outage, and the generator

may explode or catch fire when utility power is restored.

•To avoid accidents and equipment damage, check the generator every time before

starting the engine.

•Keep the generator at least 1 meter away from other equipment during operation.

•Keep the generator horizontal when running. If the generator is tilted, it may cause fuel

spillage.

•Generator operators must be trained, must know how to stop the generator quickly and

understand the purpose and operation of all controllable parts. Untrained operators must

not be allowed to use the equipment.

•Keep children and pets away from operation area.

•Keep away from rotating parts during operation.

•Do not operate unit with wet hands.

•Do not operate the generator in rain or snow, or let it get wet.

•Wipe up any spilled fuel at once.

Table of Contents

Warnings............................................................................................................................................................................ 1

Product Layout............................................................................................................................................................... 3

Unit Body.................................................................................................................................................................... 3

Control Panel............................................................................................................................................................. 3

Smart Throttle........................................................................................................................................................... 3

Safety Label Locations........................................................................................................................................... 3

Pre-operation Checks............................................................................................................................................. 4

Checking the Oil....................................................................................................................................................... 4

Checking the Fuel Level........................................................................................................................................ 5

Check the Air Cleaner............................................................................................................................................. 5

LCD Display Layout................................................................................................................................................. 6

Attaching the wheels to the generator ........................................................................................................... 7

Using the remote controller & emergency button.......................................................................................7

Using the Generator...................................................................................................................................................... 8

Starting the Engine.................................................................................................................................................. 8

High Altitude Operation........................................................................................................................................ 9

Generator Use........................................................................................................................................................... 9

AC Applications...................................................................................................................................................... 10

Output and Overload Indicators....................................................................................................................... 10

DC Applications....................................................................................................................................................... 12

Starting the Engine................................................................................................................................................ 13

Oil Alert System...................................................................................................................................................... 13

Stopping the Engine.............................................................................................................................................. 13

Maintenance................................................................................................................................................................... 14

Maintenance Schedule.......................................................................................................................................... 15

Changing Oil............................................................................................................................................................. 15

Air Cleaner service................................................................................................................................................. 17

Spark Plug Servicing.............................................................................................................................................. 17

Transporting and Storage......................................................................................................................................... 18

Transporting the generator................................................................................................................................ 19

Before storing the unit for an extended period...........................................................................................19

Muffler Fire Net Service........................................................................................................................................ 19

Troubleshooting.......................................................................................................................................................... 20

Engine will not start.............................................................................................................................................. 20

Deficient AC Output.............................................................................................................................................. 21

Equipment connected to generator won't start..........................................................................................21

There is no power in the DC electric outlet...................................................................................................21

Specifications................................................................................................................................................................ 22

Product dimensions.............................................................................................................................................. 22

Engine........................................................................................................................................................................ 22

Generator ................................................................................................................................................................. 22

Product Layout

Unit Body

Control Panel

Smart Throttle

The engine speed is kept at idle automatically when an electrical appliance is disconnected, and

will return again to proper speed when an electrical appliance is connected. This is designed to

minimise fuel consumption during operation.

Safety Label Locations

These labels warn you of potential hazards that can cause serious in ury. Read the labels and

safety notes and precautions described in the manual carefully.

Air Vent Knob

Fuel

Cap

Top Maintenance

Cover

Control

Panel

Starting Grip

Muffler

Cover

Fuel Valve

Primer Bulb

Maintenance

Access

Overload Indicator

Light

Output Indicator

Light

Oil Alert Indicator Light

Eco Throttle Switch

Engine Switch

Socket

DC Circuit

Breaker

Grounding

Terminal

AC Socket

AC RV

Socket

Avoid Fire

Label

Avoid Burns

Label

Parameter

Label

Ventilation

Label Primer Bulb

Label

EPA Label

Pre-operation Checks

•Be sure to check the generator is on a level surface with the engine stopped.

•Check the engine oil level.

•Using 2-stroke engine oil could shorten the engine's service life. Use a premium quality

4-stroke engine oil.

Checking the Oil

•Loosen the cover screw and remove the left side maintenance cover. Remove the oil filer

cap, then wipe the dipstick with a rag. Check the oil level by reinserting the dipstick into

the filler hole without screwing it in.

•If the oil level is below the end of the dipstick, refill up to the top of the oil filler neck.

ote: The Oil Alert System will automatically stop the engine before the oil level falls below the

safe limit, however to avoid the inconvenience of an unexpected shut-down, it is still advisable

to visually inspect the oil level regularly.

Dipstick

Lowest oil

level allowed

Checking the Fuel Level

•Turn the fuel cap lever to the “OFF” position before transporting.

•Use unleaded automotive fuel.

ote: DO NOT use any fuels containing alcohol. Fuel system damage or engine performance

problems resulting from the use of fuels that contain alcohol are not covered by warranty.

•Never use an oil/petrol mixture or dirty fuel.

•Avoid getting dirt, dust or water in the fuel tank.

•After refuelling, tighten the fuel filler cap securely.

•Petrol is extremely flammable under certain conditions.

•Refuel in a well-ventilated area with the engine stopped.

•Do not smoke or allow flames or sparks in the area where the engine is refuelled or where

petrol is stored.

•Do not overfill the fuel tank. After refuelling, make sure that the tank cap is closed

properly and securely.

•Be careful not to spill fuel when refilling. Spilled fuel or fuel vapours may ignite. If any fuel

is spilled, make sure the area is dry before starting the engine.

•Avoid repeated or prolonged contact with skin, or the breathing of vapour.

•KEEP FUEL OUT OF REACH OF CHILDREN

Check the Air Cleaner

Check the air cleaner element to ensure it is clean and in good working condition.

1. Loosen the cover screw and remove the left side maintenance cover.

2. Press the latch tab on top of the air cleaner body, remove the air cleaner cartridge, then

check the element.

3. Clean and replace the element if necessary.

Never run the engine without the air cleaner. Rapid engine wear will result from airborne

contaminants such as dust and dirt being drawn through the carburettor and into the engine.

It is normal for a little oil to appear under the air filter box if the generator is running for a long

period of time or if a lot of oil is in the engine. Wipe up excess oil after each use and after

stopping the generator.

Fuel Cap

Open

Air Cleaner

Cartridge

Air Cleaner

Case

Screws

Access Panel

Screws

Access Panel Air Cleaner

Element

LCD Display Layout

The LCD display will light up after the generator has started up, and will be functioning after 3-5

seconds.

Running display instructions

•U : Voltage

Displays the current voltage (V). The XXX.X (V) format (one decimal).

•I : Current

Displays the current Current (A). The XX.X (A) format (one decimal).

•F : Frequency

Displays the current frequency (Hz). The XX.X (Hz) format (integer).

•P : Power

Displays the current Power (W). The format is XXXX.X (W) (integer).

•Oil : Fuel

Invalid

•Time : Running Time

Displays the total running time. The format is xxx: xx: xx (hr: m: sec)

Overload / Oil Sensor light

Overload

The LCD screen will display the current output when the generator

is running normally. When the generator is overloaded or short

circuited, the generator will not supply power to appliances. The

voltage, current and frequency will display “0” and the power

display will show “OVER”.

At this time, the generator is not automatically shut down. Please

manually shut the generator down and investigate the reason of

the overload.

Oil Sensor

The oil sensor system is to prevent engine damage

due to not enough oil being in the reservoir. The oil

sensor light will light up in red before the oil level is

under the safe line in the crankcase, while the oil

system shutdown of the generator is automatic.

Over

Oil sensor

light

Attaching the wheels to the generator

1. Fix the wheel to the axle.

2. Fix the washer onto the wheel axle.

3. Fix the dowel onto the axle.

Using the remote controller & emergency button

ote: the generator can be started by using the starting key &

remote control.

•Use the starting key, not the remote controller, to stop the

generator when the generator has been started by the

starter key.

•Use the remote controller, not the starting key, to stop the

generator when the generator has been started by the

remote control.

•The emergency stop button can be used to stop the

generator at all times, no matter which method was used to

start the generator.

Axle

2 wheels,

2 washers,

2 dowels

Dowel

Washer

Wheels

Wheel

assembly

Fix dowel

on axle

Remote

controller

Starting

key

Emergency

stop button

Stop

Start

Press button

twice to start

generator.

Generator

remote control

Starter key

Using the Generator

Starting the Engine

1. Before starting the engine, disconnect any load from the DC receptacle. Turn the fuel cap

lever fully clockwise to the ON position.

2. Set the fuel valve to the ON position.

3. Set the motor switch to the ON position.

4. Pull slightly on the start cord until you feel resistance, then yank hard and swiftly.

•Do not let the start cord retract by itself, but instead guide it back by hand.

•Hold the carry handle firmly to prevent the generator from falling over when you pull the

start cord.

ote: A hot motor will not start if there is too much fuel in the cylinder. If this happens, wait for

five to ten minutes before trying again.

Fuel Cap

Lever

Turn the fuel

valve knob to

the ON position

Engine Switch

Once the engine has started, allow the engine to run continuously and warm up.

If the engine stops and will not restart, check the engine oil level before troubleshooting in other

areas.

Before using a device once it is connected, switch the ECO switch off.

High Altitude Operation

At high altitudes, the standard carburettor air/fuel mixture will be excessively rich. Performance

will decrease and fuel consumption will increase.

High altitude performance can be improved by installing a smaller diameter main fuel et in the

carburettor and read usting the slow tempo screws. If you always operate the generator at

altitudes higher than 1,500m (4,000 feet) above sea level, have a specialist perform these

carburettor modifications.

Even with suitable carburettor etting, engine horsepower will decrease by approximately 3.5%

for each 300m (1,000 feet) increase in altitude. The effect of altitude on the horsepower will be

greater than this if no carburettor modification is made.

ote: Operation of the generator at an altitude lower than the carburettor is etted for may

result in reduced performance, overheating and serious engine damage caused by excessively

lean air/fuel mixture.

Generator Use

•To prevent electric shock from faulty appliances, the generator should be grounded.

Connect an electric conductor (cable) of at least 1.5mm2 between the generator's

ground terminal and an external ground source.

•Connections for standby power to a building's electrical system must be made by a

qualified electrician and must comply with all applicable laws and electrical codes.

Improper connections can allow electrical current from the generator to feedback into

the utility lines.

•Do not exceed the current limit set by any one receptacle.

•Do not connect the generator to a household circuit. This could cause damage to either

the generator, or to electrical appliances in the house.

•Do not modify or use the generator for any purpose other that what it is intended for.

•Keep the generator away from other electrical cables or wires such as the distribution

network.

•The DC receptacle can be used while AC power is in use. If you use both at once, ensure

you do not exceed the total power for AC and DC.

•Most appliances require more than their rated wattage for start up.

Starting Grip

Altri manuali per CTINV35GENA

Indice

Altri manuali Certa Invertitore

Certa

Certa CTSIWAVINVB Manuale utente

Certa

Certa CTPSWAVINVA Manuale utente

Certa

Certa CTCSWAVINVA Manuale utente

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente