CFI TERA BOX SATA RAID IV Manuale utente

TERA BOX

SATA RAID IV

Storage Appliance

CFI-BXX43JD

User’s Manual

March 31, 2010

Table of Contents

1WELCOME........................................................................................................................................................4

1.1 INTRODUCTION...........................................................................................................................................4

1.2 PRECAUTION................................................................................................................................................5

1.3 FEATURES .....................................................................................................................................................5

1.3.1 OVERALL FEATURES................................................................................................................................5

1.3.2 SATA FEATURES ........................................................................................................................................6

1.3.3 USB FEATURES...........................................................................................................................................6

1.4 SPECIFICATIONS.........................................................................................................................................6

1.5 SYSTEM REQUIREMENTS.........................................................................................................................7

1.5.1 PC SYSTEMS................................................................................................................................................7

1.5.2 MACINTOSH SYSTEMS.............................................................................................................................7

1.6 PRODUCT CONTENTS................................................................................................................................8

2STORAGE POLICIES......................................................................................................................................9

2.1.1 CLEAN MODE..............................................................................................................................................9

2.1.2 LARGE MODE..............................................................................................................................................9

2.1.3 CLONE MODE............................................................................................................................................10

2.1.4 R0 MODE ....................................................................................................................................................11

2.1.5 R1 MODE ....................................................................................................................................................11

2.1.6 R10 MODE ..................................................................................................................................................12

2.1.7 R3 MODE ....................................................................................................................................................12

2.1.8 R5 MODE ....................................................................................................................................................13

3INSTALLATION.............................................................................................................................................15

3.1 BEFORE INSTALLING ..............................................................................................................................15

3.2 INSTALLING HARD DISK DRIVE...........................................................................................................15

3.3 UNSTALLING HARD DISK DRIVE..........................................................................................................16

3.4 POWER ON /OFF........................................................................................................................................17

3.5 INSTALLING SATA TO ESATA BRACKET CABLE.............................................................................17

3.6 INSTALLING EH HOST BUS ADAPTER (OPTIONAL)........................................................................18

3.6.1 WINDOWS XP (32/64-BIT).........................................................................................................................18

3.6.2 WINDOWS VISTA (32/64-BIT)..................................................................................................................19

3.6.3 WINDOWS 7(32-BIT).................................................................................................................................21

3.6.4 WINDOWS 7(64-BIT).................................................................................................................................23

3.6.5 MACINTOSH OS TIGER 10.4.X /LEOPARD 10.5.X /SNOW LEOPARD 10.6.X..................................26

3.7 INSTALLING MR HOST BUS ADAPTER (OPTIONAL).......................................................................31

3.7.1 WINDOWS XP (32/64-BIT).........................................................................................................................31

3.7.2 WINDOWS VISTA (32/64-BIT)..................................................................................................................34

3.7.3 WINDOWS 7(32-BIT).................................................................................................................................36

3.7.4 WINDOWS 7(64-BIT).................................................................................................................................40

3.8 INSTALLING NH HOST BUS ADAPTER (OPTIONAL)........................................................................43

3.8.1 WINDOWS XP (32/64-BIT).........................................................................................................................43

3.8.2 WINDOWS VISTA (32/64-BIT)..................................................................................................................47

3.8.3 WINDOWS 7(32/64-BIT)............................................................................................................................51

Ver. 100331 TERA BOX SATA RAID IV User’s Manual

4CONFIGURATION.........................................................................................................................................55

4.1 CONFIGURATION PREREQUISITES.....................................................................................................55

4.1.1 SATA HOST CONNECTIONS...................................................................................................................55

4.1.2 USB HOST CONNECTIONS......................................................................................................................55

4.2 CHANGING HOST CONNECTIONS........................................................................................................55

4.3 DISCONNECTING AUSB DEVICE..........................................................................................................55

4.3.1 WINDOWS SYSTEMS...............................................................................................................................55

4.3.2 MACINTOSH SYSTEMS...........................................................................................................................56

4.4 HARD DISK DRIVE HOT SWAP...............................................................................................................56

4.5 LED INDICATIVE STATUS.......................................................................................................................56

4.5.1 POWER LED...............................................................................................................................................57

4.5.2 PC LINK LED..............................................................................................................................................57

4.5.3 HRAD DISK DRIVE LED...........................................................................................................................57

4.6 MODE SETTING..........................................................................................................................................58

4.6.1 CLEAN MODE............................................................................................................................................58

4.6.2 LARGE MODE............................................................................................................................................59

4.6.3 CLONE MODE............................................................................................................................................60

4.6.4 CLONE MODE WITH HOT SPARE ..........................................................................................................61

4.6.5 R0 MODE ....................................................................................................................................................63

4.6.6 R1 MODE ....................................................................................................................................................64

4.6.7 R1 MODE WITH HOT SPARE...................................................................................................................65

4.6.8 R10 MODE ..................................................................................................................................................66

4.6.9 R3 MODE ....................................................................................................................................................67

4.6.10 R3 MODE WITH HOT SPARE.................................................................................................................68

4.6.11 R5 MODE ..................................................................................................................................................70

4.6.12 R5 MODE WITH HOT SPARE.................................................................................................................71

4.7 REBUILDING AREDUNDANCY OR HOT SPARE DRIVE..................................................................73

4.7.1 REBUILDING AREDUNDANCY DRIVE................................................................................................73

4.7.2 REBUILDING AHOT SPARE DRIVE ......................................................................................................75

5PARTITIONING VOLUMES ........................................................................................................................76

5.1 PARTITION AVOLUME............................................................................................................................76

5.1.1 WINDOWS SYSTEMS...............................................................................................................................76

5.1.2 MACINTOSH SYSTEMS...........................................................................................................................81

6APPENDIX.......................................................................................................................................................83

6.1 FAQ................................................................................................................................................................83

6.2 HARD DISK DRIVE COMPATIBILITY LIST.........................................................................................83

6.3 MOTHERBOARD COMPATIBILITY LIST ............................................................................................86

TERA BOX SATA RAID IV User’s Manual Ver. 100331

1 WELCOME

1.1 INTRODUCTION

Thank you for choosing TEAR BOX SATA RAID IV storage appliance. It is a low-cost solution for digital home

and small office storage appliances. Features of the TEAR BOX SATA RAID IV include advanced RAID modes.

It’s available from leading storage partners in pre-configured set-ups with USB or eSATA host connections.

Simply connect the appliance with an appropriate USB or eSATA cable to the USB host or eSATA bracket cable

(must be connected to your mainboard SATA port) or HBA (eSATA host bus adapter can be purchased

separately and must be installed in your host computer); it’s that simple.

The TEAR BOX SATA RAID IV storage appliance are available in eight different configurations (Clean, Large,

Clone, R0, R1, R10, R3 and R5), each offering a different application of features and capabilities.

The TEAR BOX SATA RAID IV Storage Processors are powered by JMicron JMB394 chip, 1 to 5-ports Serial

ATA II Port Multiplier with RAID function support. It is designed to provide SATA port expansion, data protection

and performance aggregation at various applications. It is a self-contained storage processor chip which

completely frees up the main CPU loading and the SATA ports comply with eSATA specification, the USB ports

comply with Super Speed USB specification, making it suitable for use in external storage applications.

The TEAR BOX SATA RAID IV storage appliance uses JMicron’s production-proven Multi-port Serial ATA PHY

technology and JMicron-proprietary storage processor to provide very high efficient SATA RAID operation.

With an easy configuration scheme, the device can be a pure port-multiplier which provides SATA port expansion

just like a SATA Hub, or hard-drive performance booster which provides a high performance device seen by host

controller or hard-drive data protector which automatically backup data to prevent data loss from hard-drive

damage. TEAR BOX SATA RAID IV storage appliance also has advance mode to provide both benefit of

performance boost and data protection.

The TEAR BOX SATA RAID IV storage appliance architecture which provides:

• Fully hardware-accelerated RAID Engine.

• No driver, BIOS or software required for RAID operation.

• Independent of device SATA port connection sequence.

• Rebuild proceeds continuously between power cycling.

• Supports on-line read data integrity check.

• Supports on-line command based bad sector recovery.

• Supports disk modes: Clean, Large, Clone.

• Supports RAID levels: 0, 1, 3, 5, 10.

• RAID 3 / 5 write-back cache to enhance performance.

• Supports Auto-Rebuild on Clone, R1, R3, R5, R10.

• Supports Hot-Spare on Clone, R1, R3, R5.

• Rebuild speed: 200GB/hour.

• Supports various RAID configuration methods.

Ver. 100331 TERA BOX SATA RAID IV User’s Manual

1.2 PRECAUTION

Please read the safe precautions carefully before you using TEAR BOX SATA RAID IV storage appliance. Ensure

that you use the product correctly according to the procedure described in this guide.

The following safety precautions are intended to remind you to operate the product safely and correctly. Please

read and ensure that you understand them before you proceed to the other sections of this guide.

zDo not attempt to disassemble or alter any part of the product that is not describe in this guide.

zDo not allow the product to come into contact with water or other liquids. In the event that water or other

liquids enter the interior, immediately unplug the product from the computer. Continued use of the product

may result in fire or electrical shock. Please consult your product distributor or the closest support center.

zDo not handle the product near a heat source or expose them to direct flame or heat.

zNever place the product in close to equipment generating storage electromagnetic fields. Exposure to strong

magnetic fields may cause malfunctions or corrupt data.

zCan’t operate properly under Windows 3.x/ 95 / 98SE/ ME/ NT.

zHard disk drive is not including.

zPlease be noted the following product may run irregularly which are not under warranty.

9Toshiba DynaBook, Satellite series (All K6 CPU models).

9IBM Aptiva E series (All K6 CPU models).

9Sotec E-note M260 series.

9All AMD K6 system.

9PC with sis7000/ 7001/ 7002 PCI to USB host controller.

1.3 FEATURES

1.3.1 OVERALL FEATURES

zProvides Clean, Large, Clone, R0, R1, R3, R5, R10 modes for effective storage management.

zEasy configuration of RAID modes, no IT expertise required.

zEasy monitoring of system status via LED indicators.

zEnsures data integrity with redundant backup capability.

zAchieves fastest performance via R0 mode.

zSupports automatic rebuild in Clone, R1, R3, R5, R10 mode.

zSupports hot spare drive in Clone, R1, R3, R5 mode.

zSupports HDD roaming.

zSupports current SATA II compliant HDDs, backward compatible with most SATA I compliant HDDs.

zSimplifies HDD installation; user friendly design enables effortless HDD swapping.

zFlexible connection via eSATA or USB host port.

zEliminates potential downtime, repair costs, and lost sales due to disk failure.

zDissipates heat efficiently with metal housing.

zMaximizes airflow with silent, high quality fan.

z1 host port (eSATA or USB) to 4 Serial ATA hard disk drives.

TERA BOX SATA RAID IV User’s Manual Ver. 100331

zCompatible with SATA Gen1 and Gen2 host controllers.

zCompatible USB3.0 specifications.

zEmbedded fast Storage Processor.

zUltra-fast 3Gbps host and device port capability.

zGreater than 200MBps sustained reads in R0 mode (limited by drives and host controller).

1.3.2 SATA FEATURES

The TEAR BOX SATA RAID IV provides the following Serial Advanced Technology Attachment (SATA) features:

z1 eSATA host port to 4 SATA devices (Port Multiplier Functionality).

zAuto-negotiation between SATA I (1.5Gpbs) and SATA II (3Gpbs).

zSupports SATA II Gen2i and Gen2m (External SATA Connection, eSATA).

zSupports Hot-Plug on CLEAN MODE.

zSupports Native Command Queue (NCQ).

zSupports PM aware and non-PM aware host on RAID mode.

zSupports asynchronous signal recovery.

zSupports spread spectrum clocking.

zSupports BIST and loopback mode.

zSupports 48-bit LBA addressing.

zSupports ATAPI drives.

zSupports host control of hard disk drive staggered spin-up.

zSupports Asynchronous Notification.

zOutput swing control and automatic impedance calibration for SATA II PHY.

1.3.3 USB FEATURES

The TEAR BOX SATA RAID IV provides the following Universal Serial Bus (USB) features:

z1 USB3.0 host port to 4 SATA devices.

zOperates at USB full and super speed rates (12Mb ~ 5Gb/s).

zOS independent, Driverless, Auto Configuration.

zSupport USB Super Speed, High Speed and Full Speed Operations.

zSupports and compatible with OHCI/UHCI/EHCI hosts.

zSupport Mass Storage Class.

zSupport on line USB firmware update.

zCompliance with USB3.0 electrical specification.

zCompliance with USB Mass Storage Class, Bulk-Only Transport Specification.

1.4 SPECIFICATIONS

zFour 3.5-inch SATA HDDs to a standard B type USB or eSATA interface with door cover.

zPower, PC Link, and four HDD LEDs.

zDesign based on the JMicron JMB394 and JMS539 controllers.

zSupport Clean, Large, Clone, R0, R1, R3, R5, R10 modes.

zMetal chassis (SECC) and plastic panel frame (ABS) design.

z265 (L) x 135 (W) x 186 (H) mm, NW: 2.4 Kgs, GW: 3.5Kgs.

Ver. 100331 TERA BOX SATA RAID IV User’s Manual

z150 watts power supply, 100 to 132Vac or 200 to 264Vac select switch / 47~63Hz with CE/ FCC/ UL/ CB/

BSMI requirement. Physical Dimensions: 121 mm (L) x 72 mm (W) x 35 mm (H).

zSingle packing (color box) and 4 in 1 outer carton.

1.5 SYSTEM REQUIREMENTS

1.5.1 PC SYSTEMS

• Intel Pentium-III 500MHz equivalent or faster

• Windows XP, Windows Vista, Windows 7 with the latest Service Packs

• CD-ROM drive

• 64 MB of RAM (minimum)

• 250 MB of free disk space

• Super VGA (800 x 600) or higher resolution display with at least 256 colors

• Mouse or compatible pointing device

• SATA connection: Intel ICH (Refer to the Mother Board Compatibility List Charpter) or optional Host Bus

Adapter card (controller number Sii3132/88SE9128/uPD720200) and associated software drivers with

Port Multiplier support

• USB connection: USB2.0 or 3.0 direct host connection

1.5.2 MACINTOSH SYSTEMS

• Mac Pro

• Mac OS Tiger 10.4.x

• Mac OS Leopard 10.5.x

TERA BOX SATA RAID IV User’s Manual Ver. 100331

• Mac OS Snow Leopard 10.6.x

• CD-ROM drive

• Mouse or compatible pointing device

• SATA connection: Optional Host Bus Adapter card (controller number Sii3132) and associated software

drivers with Port Multiplier support

• USB connection: USB2.0 or 3.0 direct host connection

1.6 PRODUCT CONTENTS

The following parts are content.

zTERA BOX SATA RAID IV x 1.

zUSB Cable x 1.

zeSATA Cable x 1.

zPower Cable x 1.

zTool-less Screw x 8.

zSetup and Installation Driver Repository CD x 1.

zSATA to eSATA Bracket Cable x 1.

zPCI-Express HBA x 1 (Optional).

Ver. 100331 TERA BOX SATA RAID IV User’s Manual

2 STORAGE POLICIES

You can configure the TEAR BOX SATA RAID IV storage appliance to use any of the following storage policies to

map the appliance’s physical hard drives to virtual drives that are visible to the host computer. The virtual drives

are called volumes. The host operating system treats each volume as if it were a single physical drive. This

virtualization allows you to overcome restrictions that are imposed by physical hard drives, such as speed,

storage capacity or data storage reliability.

2.1.1 CLEAN MODE

The CLEAN MODE storage policy enables each hard drive to be seen separately as one drive. When using a

SATA host controller, CLEAN MODE should only be used if the SATA host controller provides Port Multiplier (PM)

support. If a host is not PM-aware, only a single drive is presented (drive 1). No such limitation if using a USB

host connection.

The CLEAN MODE storage policy is available for a standalone (non-cascaded) storage or the top-level node of a

cascaded configuration, but not for subordinate nodes. Even though you can use the MODE SWITCH to select

CLEAN MODE for any node in a cascaded configuration, only the first CLEAN MODE volume of any subordinate

node is detected by your host. Therefore, selecting CLEAN MODE for any subordinate node is not recommended.

In a CLEAN MODE configuration, the TEAR BOX SATA RAID IV storage appliance directly exposes each

physical drive.

The CLEAN MODE will not clean up the drives partition if the drives were use as single drive before.

2.1.2 LARGE MODE

The LARGE MODE storage policy concatenates a series of physical hard drives as a single large volume;

resulting in a seamless expansion of virtual volumes beyond the physical limitations of singularly connected hard

drives. TEAR BOX SATA RAID IV storage policy delivers maximum storage space without a single large capacity

and costly hard drive.

Any node within a cascaded configuration can be set to LARGE MODE.

Hard drives 1 to 4 are concatenated into a single virtual volume in the Figure below with a storage capacity that is

equal to the sum of each of the physical hard drives 1 to 4.

TERA BOX SATA RAID IV User’s Manual Ver. 100331

It is also possible to create a LARGE volume using only a single hard disk drive connected to Port 1. However, it

is not possible to expand an existing LARGE volume by adding another hard disk drive and still preserve any

existing data on that volume.

2.1.3 CLONE MODE

The CLONE MODE storage policy stores all data in duplicate on separate drives to protect against data loss due

to drive failure. One drive clones the others at all times. Every write operation goes to all drives. CLONE MODE

provides the highest level of data protection for critical data that you cannot afford to lose if a hard drive fails, but

waste the amount of storage capacity because all data must be stored to all drives. The resulting storage capacity

of the virtual CLONE volume will be equivalent to the size of one hard drive (if all drives are the same) or the

smallest of the all drives (if they are different).

If drive fails (Maximum four drives), the CLONE volume is still usable, but it is in a vulnerable state because its

cloned hard drive is inaccessible. When the offline drive comes back online, the appliance begins a rebuild

process immediately one by one (if they are more than one fails) to restore data redundancy. A message appears

in the LED indicator to notify you that a rebuild is in progress.

Although the volume remains available during the rebuild process, the volume is susceptible to data loss through

damage to the remaining drive until redundancy is restored at the end of the rebuild and verification process. Host

access takes precedence over the rebuild process. If you continue to use the CLONE volume during the rebuild,

the rebuild process will take a longer time to complete, and the host data transfer performance will also be

affected.

It is also possible to create a CLONE volume using one hard disk drive connected to Port 1 of the TEAR BOX

SATA RAID IV, although no clone will occur until a second hard disk drive is connected to Port 1. With only one

hard disk drive connected, the CLONE volume will be available, although no data protection will be provided until

a second hard disk drive is connected.

Ver. 100331 TERA BOX SATA RAID IV User’s Manual

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CFI Magazzinaggio

CFI

CFI TERA STOR SATA RAID IV Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente