Part 2 Operation Instructions
1. Press the "ON/OFF" key to turn on:
In order to make the weighing more accurate, please warm up for more
than 3 minutes for better results.
(5-digit LCD display module) The scale will flashing display "88888"
for 3 seconds, then display "0.0g".
(6-digit LCD display module) The screen will scroll from full bright
"000000" to "999999", and then display the voltage value. After a
while, "0.0g" or "0.00" is displayed.
2. Overload reminder:
Please remove the samples immediately when the scale is overload,
otherwise it will cause damage to the scale.
(5-digit LCD display module) When weighing, if the weight of
samples exceed + 2% , the scale will display “o_Ld”.
(6-digit LCD display module) When weighing, if the weight of
samples exceed + 9d than full capacity, the scale will display
“HHHHHH”.
3. Tare:
If the displayed value deviates from the zero point or the tare weight is
