D1.5 CD/SACD transport with C1 DAC
D1.5 + C1
With non-CH DAC, the D1.5’s AES/EBU, S/PDIF or TosLink digital
outputs can be used to connect to the DAC’s digital inputs.
Diagram shows CH units tted with optional SYNC IO boards and
BNC clock link cable.
Clock Source Settings (with optional SYNC IO boards
tted)
D1.5 - Sync BNC 75 Ω
C1 - Internal
Clock Source Settings (without optional SYNC IO
boards tted)
D1.5 - Internal
C1 - Audio In
D1.5 CD/SACD transport with C1 DAC, X1 PSU and T1 Time Reference
D1.5 with C1, T1, X1
Please note that, even with the X1 connected, the D1.5 and C1 will
still require their AC power cords installed.
Use of the T1 Time Reference external clock with the D1.5 and/or
the C1 requires these units to have their optional SYNC IO boards
installed.
Both the D1.5 and C1 can be used with alternative external master
clocks. Connections and menu settings will be the same as with the T1.
Clock Source Settings
D1.5 - Sync BNC 75 Ω
C1 - Sync BNC 75 Ω
T1 BNC 1 and BNC 2 Output – State: On, Waveform: Sine, Level: Low
Ground
link
Ground
link
AC
power
AC
power
CH LINK HD
Ground
link
Ground
link
AC
power
AC
power
BNC clock cable
CH LINK HD
D1.5
D1.5
C1
C1
L/R channel analog outputs
to linestage or amplier
X1 umbilical cables
BNC clock cables
AC power
AC power
T1 X1
