Challenger NG1010T Manuale utente
SLAPSHOT TABLETOP AIR HOCKEY
TABLE ASSEMBLY INSTRUCTIONS
NG1010T
2
Thank you for your purchase of our product.
We work around the clock and around the globe to ensure that our
products maintain the highest possible quality. However, in the rare
instance that your product is defective or missing parts, contact
Challenger Manufacturing at 800-759-0977 to submit parts requests
or warranty claims. Please read the warranty information at the back
of these assembly instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN
ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
THANK YOU!
Please see Parts List at end of manual for Part Numbers when ordering parts. For replacement parts please call 800-759-0977.
ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. The table will
be partially assembled upside down and then turned over onto its legs.
2. Remove all of the contents from box and verify that you have all of the parts shown
on the Parts Identier before you begin assembly. Note: Some parts may be pre-
installed or pre-assembled.
3. Some gures or drawings may not look exactly like your product. Please read and
understand the text before beginning each assembly step.
4. When installing parts that have more than one screw or bolt, hand tighten all screws
or bolts in place before nishing tightening with screwdriver or hex wrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low
torque and use extreme caution because screws may be stripped or overtightened if
the electric screwdriver's torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS -
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
4
ASSEMBLY INSTRUCTIONS
1. Attach one LEG #2 to each corner of the TABLE BODY #1 with BOLT #4 and FLAT
WASHER #5. Note: The table is assembled upside down.
2. Carefully turn table over. Attach one GOAL #3 to each end of the table with 1/2"
SCREW #6.
5
CONGRATULATIONS!
You have now assembled your Game Table.
Please note the Care and Use instructions below to
ensure years of trouble free use of your game table.
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT sit, climb or lean on the table.
3. Do NOT drag the table when moving it as this will damage the legs.
6
90-DAY LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects
manship for a period of ninety days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; does not
for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defec-
tive product. During the warranty period, shall repair or replace defective
the purchaser. Shipping charges and insurance are not covered and are the respon-
chaser. Labor charges and related expenses for removal, installation or replacement
components are not covered under this warranty.
reserves the right to make substitutions to warranty claims if parts or unav-
shall not be liable for loss of use of the product or other consequential
expenses or damages incurred by the consumer of any other use. The user assu-
resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to pro-
cess all warranty claims. The model number and part numbers found within the assem-
bly instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977
Challenger Manufacturing
in material or work
Challenger Manufacturing
assume any liability
Challenger Manufacturing
parts at no cost to
sibility of the pur
of the product or
Challenger Manufacturing
Challenger Manufacturing
ailable or obsolete.
or incidental costs,
mes all risk of injury
Challenger
Manufacturing
PARTS LIST
8
For replacement parts please call 800-759-0977
NGP50701 TABLE BODY 1
NGP5067 LEG 2
NGP5068 GOAL 3
NGP5069 HARDWARE (PK OF #4,5,6 &9) 4,5,6,9
NGP5070 STRIKER 7
NGP5071 PUCK 8
Product Descripon
NG1010T
NAME:
Parts Idenfier Number
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Challenger Giocattolo
