Chamberlain SECURITY+ WPB3LM3 Manuale utente

Carton Inventory

Overview

The Wireless 3-Button Control Station is designed to

be used only with the Wireless 3-Button Radio

Receiver (not provided).

Control Station

Model WPB3LM3

Wireless 3-Button Control Station

Bolt (4)

Washer (4)

Nut (4)

Screw (4)

Allen Wrench

Assembly

Install 4 AA Alkaline batteries (not provided). (Lithium

batteries recommended for colder environments.)

Learn

Button

Dipswitch

Block

Your WPB3LM3 can also be programmed to operate

as a 3-button wireless control station: The green

button will open the door, the white button will close

the door and the red button will stop the door's

movement. This feature may be setup as follows:

1. To enter programming press the RADIO button on

the logic board (the RADIO LED will light).

2. To program the OPEN button to the WPB3LM3

press OPEN on the logic board. The RADIO LED

will flash and then stay on. Press the green button

on the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

3. To program the CLOSE button to the WPB3LM3

press CLOSE on the logic board. The RADIO LED

will flash and then stay on. Press the white button

on the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

4. To program the STOP button to the WPB3LM3

press STOP on the logic board. The RADIO LED

will flash and then stay on. Press the red button on

the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

5. After programming the WPB3LM3 press the

RADIO button on the logic board (LED will turn off).

NOTE: If there is no activity within 30 seconds the

radio will automatically exit programming mode.

Programming WPB3LM3 to a

Commercial Logic 3 Operator

Operation

Clear Memory of Receiver: When the Receiver has

power, press the Learn button until the LED blinks a

total of 6 times.

Mount Control Station

Step 1

Choose mounting location for Control Station. Remove

the back panel and attach it to a solid surface or post.

Mount the Control Station onto the back panel with

screws. Tighten screws with Allen wrench.

Step 2

It is recommended that the Control Station be

mounted to a Gooseneck post or non-metallic

surface.

Refer to Receiver manual for mounting instructions.

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited,

except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:

1-800-528-2806

www.liftmaster.com

The Chamberlain Group, Inc. warrants to the first retail purchaser of this product that it is free from defect in materials and/or workmanship for a period

of 1 year from the date of purchase.

One Year Limited Warranty

Altri manuali Chamberlain Controllori

Chamberlain

Chamberlain Liftmaster PROFESSIONAL 412-315HM Manuale utente

Chamberlain

Chamberlain 772CB Manuale utente

Chamberlain

Chamberlain 945C Manuale utente

Chamberlain

Chamberlain myQ 821LM Manuale utente

Chamberlain

Chamberlain LiftMaster Professional CB224 Manuale utente

Chamberlain

Chamberlain Security+ CLLA1 Manuale utente

Chamberlain

Chamberlain SMART GARAGE CONTROL Manuale utente

Chamberlain

Chamberlain Motorlift GWUP180 Manuale utente

Chamberlain

Chamberlain 395LM Manuale utente

Chamberlain

Chamberlain Dial Code Manuale utente

Chamberlain

Chamberlain CLLACD Manuale utente

Chamberlain

Chamberlain 41A6127 Manuale utente

Chamberlain

Chamberlain 855CB Manuale utente

Chamberlain

Chamberlain MyQ Manuale utente

Chamberlain

Chamberlain CAP2D Manuale utente

Chamberlain

Chamberlain 883LMW Manuale utente

Chamberlain

Chamberlain 811LM Manuale utente

Chamberlain

Chamberlain 320LM Manuale utente

Chamberlain

Chamberlain CB124EV Manuale utente

Chamberlain

Chamberlain 872 Series Manuale utente

Chamberlain

Chamberlain Motorlift GWAP120 Manuale utente

Chamberlain

Chamberlain LA400UL Guida rapida

Chamberlain

Chamberlain CAP2D Manuale utente

Chamberlain

Chamberlain LiftMaster Professional 915LM Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente