Champion instruments Scepter III Manuale utente
Scepter III
Data Collector
Getting Started Guide
TM
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
1. Physical Appearance
GPS Antenna
Earpiece
USB Cable
Lock Nut
Touch Panel
Function
Keys
Camera Key
Power Key
Microphone
Front
1
Mini USB
socket
Back
Strap
Holder
Bottom
Reset Button
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Back
Back cover
Camera
Speaker
External antenna connector
Back strap holder
Lock Screw
2
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
2. Operating instructions
I. How to Charge the Scepter III
II. Inserting the TF (micro SD) card/SIM card/Battery
III. Turning the Scepter III on and off
IV. Connecting to PC to install an application or data
V. Collecting GIS data with internal GPS and GIS applications
1. Turn the back cover screw to the open position according to the instructions on the back
cover and take off the back cover
( Figure 1 )
2. Insert the SIM card and TF card according to the instructions on the battery compartment
( Figure 2 )
3. Insert the battery
4. Open the back cover and turn the screw to the lock position according to the instructions on
the back cover (Figure 1)
I. How to Charge the Scepter III
Insert the Li-ion battery into the battery compartment to charge. Note that the mini
USB cable can also be used to charge the receiver. During charging, if the receiver is
on, there is a charging icon in the top right corner of the screen.
II. Inserting the TF (microSD) card/SIM card/Battery
instructions on the back cover
（Figure 1）
Turning Lock
Counter clockwise rotation
（Figure 2）3
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
1. Make sure Microsoft ActiveSync application has been installed (if PC OS is Win-XP). If PC OS is
Vista/Win7/Win8, make sure Windows Mobile Device Center has been installed.
2. Connect the receiver to your PC with mini USB cable.
3. ActiveSync application connects the receiver and your PC automatically. The icon appears in
the toolbar of the PC and 'Syncronization Set-up Wizard' appears meantime, click 'Cancel'
4. Click "Browse" to check the files in the receiver, then transfer data between your PC and
receiver using Windows cut, copy, and paste functions.
Installing Applications
III. Turning the Scepter III on and off
Make sure the battery has enough power; connect the receiver to your PC with a mini USB
cable (battery inserted) Press Power button for 3~4 seconds to turn on (until the boot screen
appears)/turn off. Please note that if the receiver is down, press the reset button in the bottom
of the receiver to reset.
IV. Connecting to PC [to install an application or data]
1. Make sure the Scepter III is connected with your PC via ActiveSync
2. Click "Install file" on your PC to start the installation. If the install file is compatible for
mobile devices, copy the file into the Scepter III and click to start the installation
3. Select the installation directory in Scepter III (‘Flash Storage’ is suggested), click
‘Install’. Please note that it is suggested to install the application in ‘Flash Storage’,
and save your data in the TF card
V. Collecting GIS data with internal GPS and GIS applications
Using the GPS
The GPS's physical port number is COM3, Baud Rate is 9600, and its virtual port
number is COM5
1. Start -> File Explorer -> My Device -> GNSSViewer folder -> GNSSViewer
2. BoardSetup:
BoardType: Select other or uBlox if module is uBlox GPSPort: COM3 or COM5 BaudRate:
9600
3. Press OK, wait for the connection to see GPS positioning
4
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
-Using the Camera
1. Select ‘Start->Picture & Video’，select ‘Camera’ or camera icon to take photos. Click
screen and select ‘OK’ to exit
2. Press the camera key to take a photo. Click screen and select ‘OK’ to exit
Using a Wireless Connection (Bluetooth/GPRS/Wi-Fi) Bluetooth
1. Select ‘Start→ Settings→ Connections→ Wireless management’, click the right of
Bluetooth to activate the Bluetooth device.
2. Select ‘Start→Settings→Bluetooth’, click ‘Add new device…’, system will search available
Bluetooth devices. Select the device in refurbished list and click ‘Next’ in the bottom right
corner, then input password
3. Select ‘Next’, input password in external Bluetooth device and finish the connection. Please
note the password is used to the connection between Bluetooth devices and can be setup
freely, e. ‘1234’
GRPS Connection Settings
Screen response
Select ‘Start→ Settings→ System→ Screen’, click ‘Align Screen’ icon and follow the guide to
align the screen
Adjust backlight
Select ‘Start→ Settings→ System→ Backlight', adjust backlight status according to the guild
1. Make sure there's a SIM card in the receiver
2. Select 'Start→ Settings→ Connections→ Connections '
3. Click ‘Add a new modem connection’
4. Input connection name, select ‘Cellular Line (GPRS)’, click ‘Next’
5. Input broadband (for AT&T) as the APN ,then click ‘Next’
6. Click ‘Finish’ and add new connection successfully
7. Click ‘Manage existing connections’
8. Hold down on the new connection button and select
‘Connect’
9. If there is a GPRS identifier on the signal icon on the top right corner, it indicates a successful
Connection to Wi-Fi
1. Select 'Start→ Settings→ Connections→ Connections→ Wi-Fi
2. Click 'Search for Networks,' select a network that listed. Follow the installation guide to
input password and finish the connection.
3. Useful Settings
5
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
•Operating temperature: -10+ 60℃
•Storage temperature: -30℃~+70℃
•Drop: 1.2m drop onto all faces
•Casing: Dustproof and resistant to heavy wind-driven rain per IP65 standard
•Humidity: 5% ~ 95% (non-condensing)
•Clean the display with a soft cloth, and be careful not to wipe the display with abrasive
chemicals of any kind. Do not expose your device to extreme heat(60℃） or cold (-10℃)
For example, do not leave it in the trunk of your car exposed to high heat.
•Do not attempt to open the device other than as instructed in this manual
•Rough handling can break internal circuit structure
•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
•Use only the recommended accessories.
•Do not excessive sound pressure from earphones and headphones. Note that this can
cause hearing loss.
USB Data Cables
•Insert the USB data cable connector into the USB interface of the Scepter III
•Connect the other terminal of the USB data cable with the USB interface of your PC
•This version supports a USB interface. You can connect your Scepter III with your PC via the
USB & Data cable. You can also copy or move the files to and from your Scepter III and PC,
browse the images, or record files and video files saved in the Scepter III, accessed on your
PC
Auto power off
Select ‘Start→ Settings→ System→ Power→ Advanced’, set the power off time
conditionally
Remove programs
Select ‘Start→ Settings→ System→ Remove Programs’, select the program in the list and
click ‘OK’ to remove
Restore Factory Defaults
Select ‘Start→ Settings→ System→ Clean Boot, restore factory
defaults settings according to the guide Caution: All the data and
programs will be lost, If restore factory defaults setting
4. Environmental Specifications
6
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
5. General Specifications
Size: 158mm x 85mm x 25mm
Weight: 290g (without battery)
350g (with battery)
Battery capacity of 3000mAh / 3.7V Voltage
8+ hours typical operational time
5 hours recharge time
Smart Battery System
Input at 5V DC, 500mA
Only use the specified Scepter III AC adapter
Actual time may vary, based on a variety of conditions
Windows Mobile 6.1/6.5
806MHz CPU / 256MB RAM
5.0MP Camera with AF
2G Flash storage / MicroSD max up to 8GB
3.7”VGA LCD with 480 x 640 resolution
Speaker and Mic
Professional GPS and GPS antenna
Support external GPS antenna
2-5m GPS accuracy*
TTFF: Cold Start < 50 seconds
Hot Start < 10 seconds
NMEA-0183 Protocol output
Bluetooth v2.0
WiFi connection
GSM/GPRS, 850/900/1800/1900MHz
Temperature: Operation: -20 to +60℃ Storage: -30 to +70℃
Waterproof: IP64
Drop: 1.2m height on to a concrete floor
•FCC Part 15
•CE
Enviroment
Regulatory
Communication
Physical
Battery
GPS
Performance
System
7
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
CAUTION!
The connection to USB Interfaces has to be
limited to USB 2.0 version or higher. The
connection to "power use" is prohibited.
Item Picture ERP NO. Name Description Quantity
6079-0011-0006 Getting Started
Guide
1
4009-0000-0056 USB-MiniUSB
L=1500mm
USB Cable 1
5010-0000-0002 USB Charger
USB Charger
No Cable
5V/1A
1
1
3070-0000-0001 Stylus Black 127mm 1
A5
English
31 pages
1018-0011-0006 Li-ion Battery 3.7V /3000 mAh 1
2081-0000-0005 Strap Black 180*12mm
6. Accessories
8
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
7. Warranty Terms
The GIS Scepter III is guaranteed against defective material and workmanship under
normal use and application consistent with this Manual. The equipment is guaranteed
for the period indicated, on the warranty card accompanying the product, starting
from the date that the product is sold to the original purchaser by Champion
Instruments Authorized Dealers.
During the warranty period, Champion Instruments will, at its discrepancy, repair or
replace this product at no additional charge. Repair parts and replacement products
will be furnished on an exchange basis and will be either reconditioned or new.
•The limited warranty does not include service to repair damage to the product
resulting from an accident, disaster, misuses, abuse or modification of the
product.
•Warranty service may be obtained from an authorized Champion Instruments
warranty service dealer. If this product is delivered by mail, purchaser agrees to
insure the product or assume the risk of loss or damage in transit, to prepay
shipping charges to the warranty service location, and to use the original
shipping container or equivalent.
•A letter should accompany the package furnishing a description of the problem
and/ or defect.
•The purchaser's sole remedy shall be replaces as provided above. In no event
shall Champion Instruments be liable for any damages or any other claim
including any claims for lost profits, lost savings, or other incidental or
consequential damages arising out of the use of, or inability to use the product.
9
Champion Instruments ,LLC 678-386-2208 | http://www.championinstruments.com
Indice
