Be seated on the driver’s seat.
Step on the brake pedal and turn the start key to the "ON" position.
Move the machine to the work area using the steering wheel and the
forward/backward button.
The moving speed can be adjusted from 0 to the maximum value by pressing
the accelerator pedal.
Press the sweeping button to start work, and use the steering wheel,
accelerator pedal and forward/backward button to move the machine.
The garbage can must be closed during the sweeping work.
The sweeper applies automatic and one-button operation. When the sweeping
button is turned on, all motors (including the main brush motor, side brush
motor, and ventilator motor) will automatically start, and the main brush and
side brushes will automatically descend.
2.2.4 Stopping the machine
Release the accelerator pedal to stop the machine.
Press the stop button and all sweeping functions are stopped, and the main
brush and side brushes are raised.
Turn the start switch to the "OFF" position.
2.3 Cautions
2.3.1 General instructions
When the brushes are rolling, do NOT leave the machine in the same place for
a long time, because this would leave unnecessary marks on the ground.
If you need to remove large light garbage, you can lift the front baffle so that
the garbage can be recycled into the garbage can. Note that when the front
baffle is lifted, the suction efficiency of the machine will be reduced.
In order for the machine to achieve its best cleaning effects, the filter screen
should be vibrated regularly: stop the machine, press the dust-vibrator button
to start the dust-vibrator motor and keep it operating for one minute.
During the work, the filter screen should be vibrated every 30 minute on
average (depending on the working area)
The machine cannot collect garbage when the filter screen is blocked or the
garbage can is filled. Do NOT use the machine on the damp ground to prevent
the filter screen from being damaged.
The garbage can must be discharged every time when the work is finished.
2.3.2 Discharging the garbage can
