ii
SAFETY
ImporTAn T SAFETY
InSTrucTIonS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods
of time.
13. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Warning:
>>Apparatus>shall>not>be>exposed>to>dripping>or>splashing>and>no>
objects>filled>with>liquids,>such>as>vases,>shall>be>placed>on>
the>apparatus.
• Locate the CM-7000PAL DVR in an open, well-ventilated area. Do not place the
CM-7000PAL DVR in an enclosure (such as a cabinet) without proper ventilation.
• Do not impede ventilation by covering the ventilation slots (such as with
magazines, curtains, tablecloth, etc.), or the CM-7000PAL DVR will overheat.
• Do not stack the CM-7000PAL DVR on top of or below other electronic devices
as this can cause heat build-up and vibration.
• Do not install the CM-7000PAL DVR in any area where the temperature can be
less than 40 °F or more than 113 °F, and do not cover it.
