Channel Vision DS3-XXXX Manuale utente

Questo manuale è adatto per i seguenti modelli

2

Indice

Altri manuali Channel Vision Sistema di interfono

Channel Vision

Channel Vision DP Series Manuale utente

Channel Vision

Channel Vision SI Series Manuale utente

Channel Vision

Channel Vision DP Series Manuale utente

Channel Vision

Channel Vision ST-2000 Manuale utente

Channel Vision

Channel Vision IU-XXXXP8 Manuale utente

Channel Vision

Channel Vision DS3 series Manuale utente

Channel Vision

Channel Vision SI-8000 Manuale utente

Channel Vision

Channel Vision SIM Series Manuale utente

Channel Vision

Channel Vision DS3-0212 Manuale utente

Channel Vision

Channel Vision DP-XXXX Manuale utente

Channel Vision

Channel Vision SIK-XXXXA-XX Manuale utente

Channel Vision

Channel Vision IU-XXXX Manuale utente

Channel Vision

Channel Vision DP-5xxxP Series Manuale utente

Channel Vision

Channel Vision DP-XXXX Manuale utente

Channel Vision

Channel Vision DP Series Manuale utente

Channel Vision

Channel Vision DSK-XXXXC Manuale utente

Channel Vision

Channel Vision DP-XXXX Manuale utente

Channel Vision

Channel Vision IU Series Manuale utente

Channel Vision

Channel Vision SIM-8000 Series Manuale utente

Channel Vision

Channel Vision ST-3108 Manuale utente

Channel Vision

Channel Vision ST-3048W Manuale di servizio

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente

DS3-XXXX

DS3-XXXXC

DS3-XXXXP

Telephone Entry Door Intercom

1

1

123

456

789

*0#

2

Channel Vision’s DS3-Series door stations can interface with

a variety of telephone entry control products to provide

communication with the front door. They are available in a

variety of configurations including options for a hidden

camera and compatibility with Panasonic’s popular KSU

phone systems. These door stations also feature an

integrated access control keypad which can be used to open

an entrance gate or an electric door lock. The DS3-Series

door stations install in a standard 3-gang junction box,

making it a simple and affordable addition to any home.

Dimensions:

7.25”

5.0”

0.38”

1.25”

Depth

Behind Plate

Plate

Depth

Only

F e a t u r e s :

h

h

h

h

h

Rust-proof faceplate

Discrete speaker and microphone

Hidden camera option available

Fits a 3-gang box

Available in many different finishes

123

456

789

*0#

33

Understanding the model number:

Understanding the compatibility options

(DS3-0212C shown for example only)

Part numbering: DP door plates

DS3-0212C

Blank P-0920, P-0921, & TE110/C-0920 compatible

C P-0930 compatible

222 Polished Brass

232 Antique Brass

252 Oil Rubbed Bronze

302 Satin Nickel

0 No camera

6 Color camera (Note: camera option is not

available on IU-xxxxP8 models.)

There are three different types of systems that DS3 door stations can

be used with. The compatibility for these different types of systems is

indicated by the suffix of the model number which follows the 4-digit

numerical code.

If there is not a letter suffix on the model number, such as DS3-0212,

that door station is compatible with Channel Vision’s telephone entry

products including models P-0920, P-0921, C-0920, and TE110.

If the suffix is the letter “C”, such as DS3-0212C, then the door plate

is compatible with Channel Vision’s Whole-House CAT5 Intercom

Hub, model P-0930.

Please double check to be sure that you have purchased the correct

model number for your application.

This door intercom product consists of two sub assemblies which must be

attached to each other before the final assembly can be installed. In this

guide the electronic sub assembly will be referred to as the “Companion

Board” and the mechanical assembly will be referred to as the “Door Plate.”

Review the following diagrams and assemble as shown.

Attaching the Companion Board

Companion Board Connection Details

To Button

To Speaker

Microphone

Connect Telephone Entry Controller here

(see following pages for details)

Remove the plastic cap that covers the microphone compartment on the

door plate. Place the microphone in the compartment and replace the plastic

cap over the microphone. Note that the plastic cap will form a friction fit over

the top of the microphone wires holding them snug against the outer

compartment wall until they exit at the base as shown. Remove the mounting

screws which are already attached to the bracket and use them to attach the

companion board. The companion board should mount on the front side of

the bracket so that the screws pass through the companion board before

threading into the bracket.

4

Place microphone here and

cover with cap.

Microphone cap

Companion board

Place 2 washers on each side

between companion board

and mounting bracket.

5

This door intercom product consists of two sub assemblies which must be

attached to each other before the final assembly can be installed. In this

guide the electronic sub assembly will be referred to as the “Companion

Board” and the mechanical assembly will be referred to as the “Door Plate.”

Review the following diagrams and assemble as shown.

Attaching the Companion Board

(DS3-XXXXC)

Companion Board Connection Details

To Speaker

Microphone

(attached to back side) Use D1 for Door1 chime sound

Use D2 for Door2 chime sound

Volume Adjustment

Position the companion board onto the three mounting tabs as shown below.

The microphone attached to the back side of the companion board should

line up with the microphone tube on the bracket. Bend the mounting tabs to

secure the companion board. Connect the speaker and button wires by

sliding the small connector over the exposed pins on the companion board

as shown.

To Button

Companion Board

Connect Button Here

Connect Speaker Here

Microphone

Tube

Align holes with

mounting tabs

Bend mounting

tabs over to

secure the

Companion Board

Connect Intercom Hub here

(see following pages for details)

Completed Sub-assembly

#

0

*

9

8

7

6

5

4

123

6

The DS3-6xxx, DS3-6xxxC, & DS3-6xxxP come with a mini color camera that

can be attached to the integrated mount that allows the camera to see

through the opening in the plate. The illustrations bellow show how to mount

the camera.

Attaching & Installing the Camera

Mini Camera

Mounting

Hole

Cone

Lens

Connect Intercom Hub here

(see following pages for details)

Break away the section of perforated metal screen that

covers the camera opening by pushing a screwdriver

through the slot on the front of the door plate. Press

near the top or bottom of the section and the tabs that

hold it in place will break free. Attach the camera to the

mount so that the cone of the camera points through

the opening. Adjust the camera to the desired position

and secure it in place by tightening the screw on the

mount.

Remove this

section of screen

material

Front View

Rear View

Attach camera to mount

using the screw provided

Attach pigtail

to rear of

camera

Camera Power

To Monitor or

Video Distribution

Coax Extension

(not included)

BNC Video

Connector

2-Conductor Power

Supply Extension

(not included)

Installation:

If necessary, attach the camera’s video output to a coax extension that is long

enough to reach your monitor or video distribution equipment.

If necessary, cut the connector off of the end of the power supply and splice in

an extension using crimp-on connectors.

7

The DS3-0xxx and DS3-6xxx both interface with the Channel Vision’s

telephone entry controllers: TE110, C-0920, P-0920 and P-0921 to provide

audio and video communication with the front door. Using a 2-conductor

wire, connect the Telephone Entry Controller to the empty screw terminal

block on the door station (see diagram).

Channel Vision Compatible (DS3-xxxx)

Panasonic Compatible (DS3-xxxxP)

Strike

Active

Ring

Intercom

Active

12VAC

#

or

*

No CO

Strike

Time

3/5 rng

1

2

3

PowerIntercomUnlock

Door

ChimeCO Input Phones

TELEPHONE ENTRY CONTROLLER

CO Input Telephones

Model

P-0920

PRO

CH A NN EL

TM

VIS I O N

Connect to the

terminals marked

“ TO SYS”

From Telephone

Service Provider

House

Telephones

12VAC

500mA

Using a 2-conductor wire, connect the door

phone output of your Panasonic KSU to the

empty screw terminal block on the door station

Channel Vision's Panasonic models are a compatible replacement for the

Panasonic KXT30865. They are an attractive alternative to the standard

plastic door station sold by Panasonic. This product interfaces with

Panasonic’s KSU phone systems to provide communication with the front

door.

Connect to the

terminals marked

“ TO SYS”

From Telephone

Service Provider

System Phones

Panasonic

KSU

Using the Access Keypad

500ft.

max

The diagram below shows how to connect the DS3-xxxxC to Channel

Vision’s CAT5 Whole-House Intercom system. When the button is pressed

on the DS-xxxxC the ST-2000 Intercom Stations will generate a door chime.

Pressing Answer/End will open communication with the DS3-xxxxC. Model

DS3-6xxxC includes a color camera and DS3-0xxxC includes no camera.

Channel Vision Compatible

( -xxxx )

CAT5 Intercom

DS3 C

P-0930

PRO

CHANNEL

TM

VISI O N

Model

P-0930 Whole-House Intercom

Page Out

Page Trigger

IR

Emitters +15VDC

Power

Link

In

Link

Out

Hub

A

B

C

DRoom 1 Room 2 Room 3 Room 4 Room 5 Room 6

ST-2000

Press here to

answer door

These terminals can be

used to connect a ST-C5IDS

Door Strike Relay Module Roo m 1

Room 2

Room 3

Room 4

Room 5

Room 6

Monitor

DND Answer/End

Page

Using CAT5 wire, connect the

P-0930 to the 110 connector

on the door station

Power Light: Standby (Red)

Active (Green)

IMPORTANT: if power light

does not illuminate,

immediately disconnect

power supply and check

for correct polarity.

#

0

*

9

8

7

6

5

4

123

8

DS3-xxxxC

External Indicator Light (Orange)

Luminous keypad - 10 entry buttons

2 function keys

Features

Anti-tamper design and alarm will activate if unit is moved

Door opening setting adjuments 01-99 seconds

Stores up to 8 different door opening passwords

Power supply : DC 12V. 80 mA (standby), 110mA (active)

Programming the Keypad

System password (default is 4567) is required to enter system setting modes.

The reader will send a beep sound to indicate entering system setting modes.

If there isn’t any action within 20 seconds, the system will escape from the

setting mode. When programming, the “#” key is used as the Confirmation or

“Enter” key. In most cases “*” is used to clear an entry or exit a process.

Default system password : 4567

Change the 8 user passwords

Press: * # [system password] #

System Reaction: One beep

Press: 3 Then enter 1-8 (example:”1” for the first password, “2” for the

second, “3” for the third, etc.)

Press: [enter the 4-digit password]

System Reaction: One beep (Password changed successfully)

9

Gray

Yellow

Purple

Black

Red

AP-55 2” X 1” X 3/4” (Included)

NC

COM

ALARM

NO

PS

NC

OD OR

COM

NO

GR

Y

P

B

R

VIN

GND

GND

+12VDC

White : Wiring of orange LED

Blue :Anti-tamper switch COM

Orange : Anti-tamper switch N.C.

Door control relay. Dry contact N.O.

Door control relay. Dry contact COM

Door control relay. Dry contact N.C.

Alarm output relay. Dry contact N.O.

Alarm output relay. Dry contact COM

Alarm output relay. Dry contact N.C.

Exit push button

Keypad connections

Tamper spring installs on the

switch before mounting. Make

sure the tamper spring touches

the inner surface of the case.

Green : Door detection

Changing the System Password

Press: * # [system password] #

System Reaction: One beep

Press: 8 [enter new 4-digit system password] #

System Reaction: One beep

Press: [re-enter new 4-digit system password for confirmation]

Note: If confirmation password didn’t match, you’ll hear repeated beeps,

and the system will exit the process. If no beeps are heard, then

continue.

Change Anti-Tamper Switch Setting: 0=ON 1=OFF

Press: * # [system password] #

System Reaction: One beep

Press: 7 [enter the desired anti-tamper mode, 0=On, 1=Off]

System Reaction: One beep (Anti-Tamper mode has been set)

10

Opening the Door Lock with a System Password

Press: * # [system password] # 0 0

System Reaction: One beep, power light turns green and door is

Opening the Door Lock with a User Password

Press: [user password]

System Reaction: One beep, power light turns green and door is

Setting Activation Mode

NOTE : Set the activation mode before attempting to use the user

passwords.

To set activation:

Press: * # [system password] #

System Reaction: One beep

Press: 5, 1

Set Door Strike Time Duration

Press: * # [system password] #

System Reaction: One beep

Press: 4 [enter the 2-digit time duration in seconds (01-99)]

System Reaction: One beep (Time duration set successfully)

Change Reader Alarm Setting: 0=ON 1=OFF

Press: * # [system password] #

System Reaction: One beep

Press: 0 3

System Reaction: One beep

Press: [Enter the desired alarm setting 0=On, 1=Off]

System Reaction: One beep (Alarm mode has been set)