Chard KS-2 Guida

Electric

FEATURES:

2-Stage electric sharpening

system allows for safe, easy

knife sharpening

- Non-slip feet allows sharpener

to stay in place while in use

2-STAGE SHARPENING

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS

Read and understand all instructions before using the appliance.

1. STAGE 1: Sharpening - Course Grind

2. STAGE 2: Honing - Fine Polish

3. ON/OFF SWITCH

4. NON-SLIP SUCTION CUP FEET

When using electrical appliances, basic safety precautions should always be followed,

including the following:

• Read all instructions before use.

• To protect against electric shock DO NOT immerse cord, plug, or sharpener in water or other

liquid.

• Close supervision is necessary when any appliance is used near children. DO NOT allow children

to use this appliance.

• Unplug from outlet when not in use, and before cleaning.

• DO NOT operate any appliance with a damaged cord or plug. Should the appliance malfunction,

or if it has been damaged in any manner, return appliance to retailer where purchased if under

warranty.

• The use of accessories is not recommended by the appliance manufacturer as it may cause

injuries.

• DO NOT use the appliance outdoors.

• DO NOT let cord hang over edge of a table, or touch a hot surface.

• DO NOT place on, or near, a hot gas or electric burner, or in a heated oven.

• DO NOT use this appliance for any purpose other than its intended use.

• This appliance is NOT intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a

similarly qualied person in order to avoid a hazard.

• This appliance is for household use only.

OVERVIEW OF COMPONENTS

How to Use:

1. Place sharpener on a at, stable surface. With the suction feet moist,

push down to secure it. Plug the cord into a polarized plug only - NEVER

use an extension cord. For safety, this sharpener will t into a polarized

plug one way. If the plug will not t, reverse it. Contact a qualied

electrician if it still will not go in completely. This safety feature should

not be changed in any way. Turn on the unit by by pressing the On/Off

switch.

2. When sharpening a knife for the rst time, use both STAGE 1 and

STAGE 2. From then on, it will only be necessary to use both stages

when the knife becomes dull again. Otherwise, you can simply use

STAGE 2 to keep a ne hone on your knife.

IF MISSING PARTS, PLEASE CALL 1-800-288-4545. DO NOT RETURN TO STORE.

Intended Use:

This device is used for sharpening household knives. It is intended exclusively for

this purpose and may only be used as such. It may only be used in the manner

described in these instructions. The device may not be used for commercial

purposes. Any other use of this device is considered to be contrary of the intended

use and may result in damage to materials or even personal injury.

The Metal Ware Corp.®does not accept any liability for damage caused as a

result of the use of this device contrary to its intended use.

HOW TO USE

Please do not return product to the store you purchased it from.

For questions or concerns please contact customer service at

800-288-4545 or visit our web site at chardproducts.com.

STAGE 1: Sharpening - Course Grind

• With the knife parallel to your work surface, slowly (2"per second) pull the

knife towards you through both slots in STAGE 1. Repeat three times. In order

to sharpen the tip of your knife, carefully lift up the handle as you draw the

curved portion of the blade through the blade guides.

STAGE 2: Honing - Fine Polish

• With the knife parallel to your work surface, slowly (2"per second) pull the

knife towards you through both slots in STAGE 2. Repeat three times. After

the third time, make one more fast pass (one second) through both blade

guides. Carefully wipe off the blade with a moist cloth prior to use. If the knife

still does not cut to your standards, repeat the entire process.

CAUTION

Do not run ngers along edge of knife to check sharpness. To avoid injury, handle knives with extreme

care. Never insert the tip of the knife into the blade guide rst and push through. This could damage the

knife sharpener and your knife. The knife sharpener is designed so that very little effort is needed to draw

the knife through the blade guides. If downward pressure is applied to the knife as it is being drawn

through the blade guides, the sharpening wheels will stall.

USEFUL INFORMATION

• If you would like to keep a razor sharp edge on your knife, run it through

STAGE 2 prior to every use.

• You may have to repeat STAGE 1 AND 2 under certain circumstance such

as: using a knife made of tempered steel, using a very dull knife, the knife

has been sharpened in the past by using another method or it is the rst

time you have sharpened a specic knife. This will only occur the rst time

you use this sharpening system. Moving forward, the normal process can

be used.

• DO NOT use this sharpener on electric serrated knives or knives serrated

on both sides. We DO NOT recommend using it on non-electrical one

sided serrated knifes. However, if you do, only use STAGE 2 and only

sharpen the non-grooved side of the knife.

CAUTION

Never use your ngers to check the sharpness of a knife. Always handle knives with extreme care. The

tip of a knife should never be placed in the blade guides rst and then pushed through. Doing so could

damage the sharpener and/or your knife. Do not press knife blade down as it goes through the blade

guides as the sharpener will shut down for safety reasons.

PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CARE AND CLEANING

• Wipe clean only the exterior of the sharpener with a non abrasive cleaner.

• Never submerge the knife sharpener in water or any other liquid.

• Never lubricate the sharpener.

• Not for use by children. Always keep out of reach of children.

• DO NOT attempt any maintenance or alteration to this item yourself. This

should always be done only by a trained professional.

• If you do need service, please contact Customer Service at 800-288-4545

• The metal lings collect inside two receptacles on the bottom of the

knife sharpener. To empty, remove the plastic plugs and dump out

the lings. Check every 6 months under normal usage. (IMAGE 1)

IMAGE 1

GENERAL INFORMATION

Meaning of the “Dustbin” Symbol

Protect our environment: DO NOT dispose of electrical equipment in the

domestic waste.

Please return any electrical equipment that you will no longer use to the collection

points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and

human health.

This will contribute to the recycling and other forms of reutilisation of electrical and

electronic equipment.

Information concerning where the equipment can be disposed of can be obtained

from your local authority.

LIMITED WARRANT Y

KS-2 / Chard

Electric Knife Sharpener

C/O MW

PO Box 237

Two Rivers, WI 54241-0237

chardproducts.com

Your product is warrantied for one year from date of purchase against all defects in material and

workmanship. Should your product prove defective within one year from date of purchase or receipt,

return the unit, freight prepaid, along with an explanation of the claim. Please package your product

carefully in its original box and packing material to avoid damage in transit. We are not responsible

for any damage caused to the product in return shipment.

Under this limited warranty, we undertake to repair or replace any parts found to be defective at

our sole discretion. This limited warranty is only valid if the product is used solely for household

purposes in accordance with the instructions. This limited warranty is void if the unit is connected

to an unsuitable electrical supply, or dismantled or interfered with in any way or damaged through

misuse.

LIMITATION OF REMEDIES AND DAMAGES: Except for the limited warranty and

remedies expressly stated above, the Metal Ware Corp shall not be liable to you, or to anyone

claiming by or through you, for any obligations or liabilities, including, but not limited to, obligations

or liabilities arising out of breach of contract, breach of warranty, statutory claims, negligence or

other tort or any theory of strict liability, with respect to the product or the Metal Ware Corp’s acts

or omissions or otherwise. Buyer agrees that in no event shall the Metal Ware Corp be liable for

incidental, compensatory, punitive, consequential, indirect, special or other damages. Warranty

does not cover consequential or incidental damages such as property damage and does not cover

incidental costs and expenses resulting from any breach of this warranty, even if foreseeable. Some

states or provinces do not allow the exclusion or limitations of incidental or consequential damages,

so the above limitation or exclusion may not apply to you depending on the State or Province of

purchase.

We ask that you kindly ll in the details on your warranty card and return it within one week from date

of purchase.

Send warranty card to:

Indice

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente