Injuries and Infections
For hygiene purposes, Charder recommends cleaning the measuring
platform after each measurement with a soft cloth and alcohol.
Ensure that the measuring platform is dry before usage.
Caution
Preventing Device Damage
Please contact your local Charder distributor for regular maintenance
and calibration.
This device does not contain any user-maintained parts. All
maintenance, technical inspections, and repairs should be conducted
by an authorized Charder service partner, using original Charder
accessories and spare parts. Charder is not liable for any damages
arising from improper maintenance or usage. Dismantlement of the
device will void the warranty.
Take care to make sure fluids do not enter the device, as they may
damage the internal electronics.
Switch off the device before disconnecting the power supply.
Do not place the device in direct sunlight, or in close proximity to an
intense heat source. Excessively high temperatures may damage the
internal electronics.
Strong cleaning agents can damage the measuring platform's
surface.
Caution
Disposal/Environmental
All batteries contain toxic compounds; batteries should be disposed
of via designated competent organizations. Batteries should not be
incinerated.
The optimum operating temperature for the scale is 0℃to +40℃;
although it will operate at higher and lower temperatures, battery
life will adversely be effected.
Warranty/Liability
If Charder is responsible for a fault or defect present upon receipt of
the unit, Charder shall either repair the fault, or supply a
replacement unit. Should the repairs or replacement delivery fail,
statutory provisions shall be valid. The period of warranty shall be
two years, beginning on the date of purchase. Please retain your
receipt as proof of purchase.
