LiPo LiFe Battery Management System BMS16 V1.16
www.chargery.com
page 2 total 13
Chargery BMS16 is designed special for LiPo LiFe battery pack applied to storage energy system and
Electrical Vehicle including E-Motorcycle, E-Scooter and so on. The unit can measure or detect the
battery voltage, cell voltage, charge discharge current, battery temperature, and battery SOC
(State of Charge) , displayed with TFT color LCD.
Safety Notes
Please read the entire manual completely before using, to make sure you can use this device better
and more safely.
1. Ensure the BMS program and settings match the battery pack, otherwise the battery will be
damaged and a dangerous situation may arise, especially for Lithium batteries, which may cause
fire.
2. For storage energy system application and for Electrical vehicle application will have many
differences, please adjust those key parameters carefully, or contact us for more details.
3. Do not allow water, moisture, metal wires or other conductive material into the device.
4. Never charge or discharge any battery having evidence of leaking, expansion/swelling, damaged
outer cover or case, color-change or distortion.
5. Do not try to charge “non-rechargeable” dry cells.
6. Do not mix batteries of different types, different capacities or from different manufacturers.
7. Do not exceed the battery manufacturer’s suggested maximum charge and discharge rates.
8. Carefully follow the battery pack manufacturer’s recommendations and safety advice.
Copyright
Copyright@ Shenzhen Chargery Po er Co., Ltd. All rights reserved.
Without prior written consent by Shenzhen Chargery Power Co., Ltd, any units or individual extract
and copy parts or entire contents of this manual, and transmission in any form is illegal and strictly
prohibited.
The product described in this manual, may include copyright software ownership belonged to
Shenzhen Chargery Power Co., Ltd and its licensee, except getting the permission from relevant
rights holders, otherwise any copy, distribute, modify, excerpt, decompile, disassemble, decrypt,
reverse engineering, lease, transfer, sub-license, as well as other acts of infringement of software
copyright is strictly prohibited, but apart from the restrictions prohibited by applicable law.
BMS16 Special Features
1. The BMS16 uses advanced ADC measurement technology, high accuracy, high voltage and high
current detection circuit. The maximum voltage measurements tolerance is within 5mV at up to
16S LiPo battery (69V)
2. Charge/discharge current up to 300A.
3. Support regenerative braking, during braking operation can charge the batter pack and the
discharge power (Wh) will decrease to response to the braking power.
4. BMS16 calculate and display the charge and discharge power (Wh), generally the battery rated
power is rated voltage multiply rated battery capacity.
5. TFT LCD screen that provides rich information including current, voltage, power, capacity, control
status, SOC and temperature and so on.
6. BMS16 features a maximal safety protection, within the range parameters can be setup, BMS16
will alarm and cutoff charge or discharge according to users’ setup, out of range of parameters,
and trigged absolute maximum ratings BMS16 will force to cutoff charge or discharge to prevent
