Chatter Box Xbi2 Manuale utente

xbi2_maual.indd 2 4/15/09 3:40:36 PM

xbi2_maual.indd 3 4/15/09 3:40:38 PM

ChatterBox! strives to provide our customers with powerful

and reliable communication systems that offer state-of-the-

art technology and cutting edge design. Every communica-

tion system in the ChatterBox! product line provides unique

features and beneﬁ ts along with communication compatibility

within the entire product range. Each ChatterBox! system is

manufactured to exacting standards infusing affordable price,

multiple mounting options, intuitive accessories, crystal clear

reception, maximum range, compact design and quality. Inno-

vation, rigorous testing protocols, and outstanding customer

service are all top priority at ChatterBox!

xbi2_maual.indd 4 4/15/09 3:40:38 PM

CONTENTS

1. KIT INCLUDES 4

1.1 OPEN FACE KIT 4

1.2 FULL FACE KIT 4

2. XBI2 DESCRIPTION 5

2.1 EXTERIOR DESIGN 5

2.2 DESIGN DESCRIPTION 5

2.2.1 POWER Button 5

2.2.2 MODE Button 5

2.2.3 VOLUME UP Button 5

2.2.4 VOLUME DOWN Button 5

2.2.5 INTERCOM Button 5

2.2.6 CHARGE PORT 5

2.2.7 HEADSET PORT 5

2.2.8 LED 5

3. INSTALLATION 6

3.1 GENERAL INSTALLATION 6-7

3.2 ALTERNATIVE FULL FACE XBI2 UNIT HEADSET INSTALLATION 7

4. BASIC OPERATION

4.1 CHARGING XBI2 UNIT 7-8

4.2 TURNING XBI2 UNIT ON / OFF 8

4.2.1 Turning on 8

4.2.2 Turning off 8

4.3 BATTERY LEVEL STATUS DISPLAY 8

4.4 LOW BATTERY ALERT 9

4.5 ADJUSTING XBI2 UNIT VOLUME 9

5. PAIRING OPERATION

5.1 PUTTING XBI2 UNIT IN BLUETOOTH® PAIRING MODE 8

5.2 PAIRING XBI2 UNITS TOGETHER 9

5.2.1 Pairing 3 XBi2 units together 9

5.2.2 Pairing 2 XBi2 units together 9-10

6. FUNCTION OPERATION

6.1 BLUETOOTH® / WIRED AUDIO DEVICES 10

6.1.1 Pairing a stereo Bluetooth® adaptor 10

6.1.2 Connecting audio source via cable to AUX Port 10

6.1.3 Switching from Bluetooth® mode to AUX mode 10

6.1.4 Switching from Intercom mode to Audio mode 10

6.2 BLUETOOTH® PHONE OPERATION 10

6.2.1 Pairing a Bluetooth® compatible phone 11

6.2.2 Answering a phone call 11

6.2.3 Placing a phone call 11

6.2.4 Placing a last number dialed call 11

7. BLUETOOTH® CONNECTING OPERATION

7.1 CONNECTING A PAIRED STEREO BLUETOOTH® ADAPTOR 11

7.2 CONNECTING A PAIRED BLUETOOTH® PHONE 11-12

7.3 CONNECTING A PAIRED STEREO BLUETOOTH® ADAPTOR AND CONNECTING A

PAIRED BLUETOOTH®PHONE AT THE SAME TIME 12

8. SPECIFICATION

8.1 ELECTRICAL SPECIFICATION 12

8.2 PRODUCT SPECIFICATION 12

8.3 BUTTON FUNCTION SUMMARY 13

9. LIMITED WARRANTY

9.1 LIMITED WARRANTY 13

LICEN

SE INFORMATION

10.1 FCC ID 14

10.2 EUROPEAN CE NOTICE 14

10.3 DECLARATION OF CONFORMITY 14

10.4 WARNING 14

11. FREQUENTLY ASKED QUESTIONS

xbi2_maual.indd 5 4/15/09 3:40:39 PM

1.1 OPEN FACE KIT

1.2 FULL

FACE

KIT

NO.

DESCRIPTION

Q’TY

XBi2 Main Unit

AC Home Charger

Open Face Headset

Pre-Installed Lithium-Polymer Battery

Plastic Base Plate

Metal Mounting Bracket

Rubber Pad

Foam Speaker Covers

Popsicle Stick

Phillips Screws

Double Sided Mounting Tape

Sticky Back Velcro Discs

Wire Clips

1. KIT INCLUDES

NO.

DESCRIPTION

Q’TY

XBi2 Main Unit

AC Home Charger

Full Face Headset

Pre-Installed Lithium-Polymer

Battery

Plastic Base Plate

Metal Mounting Bracket

Rubber Pad

Foam Speaker Covers

Popsicle Stick

Phillips Screws

Double Sided Mounting Tape

Sticky Back Velcro Discs

Wire Clips

xbi2_maual.indd 6 4/15/09 3:40:44 PM

2.2 DESIGN DESCRIPTION

2.2.1 POWER BUTTON

*Power ON/OFF of main unit

*BLUETOOTH® pairing mode

*When the BLUETOOTH® phone is connected, use hands-free mode (An

swer/Hang up phone call)

GROUP INTERCOM pairing mode (with MODE button)

2.2.2 MODE BUTTON

*MP3 mode source select between BLUETOOTH® MP3 and AUX MP3

*GROUP INTERCOM pairing mode (with POWER button)

2.2.3 VOLUME UP BUTTON

*Audio volume increase

2.2.4 VOLUME DOWN BUTTON

*Audio volume decrease

2.2.5 INTERCOM BUTTON

*GROUP INTERCOM select – voice communication with other XBi2

*MP3 mode

2.2.6 CHARGE PORT

*Primary Function = charge cord port

*Secondary Function = optional auxiliary audio cord input

2.2.7 HEADSET PORT

*Primary Function = headset cord port

2.2.8 LED

*RED = Primary Function = XBi2 unit On/Off status

Secondary Function = GROUP INTERCOM pairing status

*BLUE = Primary Function = BLUETOOTH® status

Secondary Function = charging status

2. XBi2 DESCRIPTION

Power

Intercom

Mode

Volume Up

Volume Down

Headset Port

Charge Port

LED

2.1 Exterior Design

xbi2_maual.indd 7 4/15/09 3:40:45 PM

INSTALLATION

1. Attach plastic base plate to metal mounting bracket by aligning tabs “A”

with slots “B” and sliding plastic base plate onto metal mounting bracket.

Insert screw “D” through metal mounting bracket and into threaded hole

“C” and tighten. (Figure 1)

2. Attach the foam covers and sticky backed velcro discs to the speakers.

(Figure 2)

3. Place the helmet upside down on a soft surface. The metal mounting

bracket should be placed at approximately the middle of the left side of

the helmet. Insert the inner metal portion of the metal mounting bracket

between the inside of the outer shell and the inner liner of the helmet,

slide the metal mounting bracket all the way in while holding the outer

portion away from the helmet. (Figure 3)

Slot “B”

Tab “A”

Screw “D”

Threaded hole “C”

Figure

Figure 2

Figure

3.1 GENERL INSTALLATION

4. Slide rubber pad between outer shell of helmet and the outer portion of

the metal mounting bracket.

5. Attach the RIGHT speaker (the long wire) to the inside of the helmet.

Attach the LEFT (the short wire) to the inside of the helmet.

6. Slide XBi2 unit onto the plastic base plate and plug the headset into

the headset port. Use the popsicle stick to gently tuck the speaker wires

between the inner liner and the outer shell of the helmet.

xbi2_maual.indd 8 4/15/09 3:40:47 PM

4.1 CHARGING XBI2 UNIT

1. XBi2 unit must be off

2. Plug charger into household power supply, then plug charge cord into

the charge port of the XBi2

3. LED display on the XBi2 / charger

- XBi2 Unit

BLUE LED will remain on until XBi2 is done charging

- Charger

RED LED- XBi2 is charging

GREEN LED- XBi2 is done charging

4. For a complete charge it will take approximately 3 hours

*** CHARGE XBI2 UNIT BEFORE PERFORMING ANY OPERATIONS ***

**READ THROUGH INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING OPERATIONS**

*** DO NOT ATTEMPT TO OPERATE UNIT WHILE CHARGING ***

*** DAMAGE TO UNIT OR AC CHARGER MAY OCCUR ***

3.2 ALTERNATIVE FULL FACE XBI2 UNIT HEADSET INSTALLATION

1.Attach double sided mounting tape to the back side of the plastic base

plate. Position the plastic base plate at approximately the middle bottom

of the left side of the helmet and apply.

2.Install speakers at stated in step 2 & 5 of the previous instructions.

3.Position and attach the microphone to the middle of the helmet chin bar

directly in front of the mouth. Use the popsicle stick to gently tuck the mi-

crophone wire between the inner liner and the outer shell of the helmet.

4.Slide XBi2 unit onto the plastic base plate and plug the headset into

the headset port. Use the popsicle stick to gently tuck the speaker wires

between the inner liner and the outer shell of the helmet.

4. BASIC UNIT OPERATION

xbi2_maual.indd 9 4/15/09 3:40:49 PM

4.5 ADJUSTING UNIT VOLUME

1. XBi2 unit will be at middle volume level whenever unit is turned on

2. Momentarily press (approximately 1 second) and release the volume

button

3. A single tone sound will be heard for each level

4. At maximum volume level a two tone sound will be heard

5. BLUETOOTH® PAIRING OPERATION

5.1 PUTTING XBI2 INTO BLUETOOTH® PAIRING MODE

1. Start with XBi2 unit off

2. Press and hold Power button until LED light is steady RED then after ap-

proximately 6 seconds LED will start to ﬂ ash BLUE

3. Release Power button and the XBi2 is now in Bluetooth® pairing mode

NO. LEVEL STATUS VOLTAGE [V ] BLUE LED

1 3/3 BATTERY Full Over 3.86V 3 times ON/OFF

2 2/3 BATTERY 2/3 3.54V ~ 3.86V 2 times ON/OFF

3 1/3 BATTERY 1/3 3.34V ~ 3.54V 1 times ON/OFF

4 0/3

Low BATTERY ALERT

Below 3.34V 1 times ON/OFF

4.4 LOW BATTERY ALERT

1. If the voltage of the main unit is entering +3.2V ±0.1V, you will hear

the ﬁ rst alarm beep sound from the speaker.

2. After the ﬁ rst beep, if the voltage is entering +3.1V ±0.1V, the power

will turn OFF automatically.

4.2 TURNING XBI2 UNIT ON / OFF

4.2.1 TURNING ON

1. Press and hold the Power button until LED lights steady RED

2. Release Power button

3. LED will now alternate ﬂ ashing BLUE & ﬂ ashing RED continuously

4.2.2 TURNING OFF

1. Press and hold the Power button until LED lights steady RED

2. A two-tone sound will be heard

3. Release Power button

4. LED will now be off

4.3 BATTERY LEVEL STATUS DISPLAY

1. Press the Power button around 1second, RED LED will stay “ON” then

release the Power button.

2. Please refer to the table below for BATTERY LEVEL STATUS

xbi2_maual.indd 10 4/15/09 3:40:50 PM

5.2 PAIRING XBI2 UNITS TOGETHER

*** MAIN UNIT MUST BE ON AT ALL TIMES TO COMMUNICATE BIKE-TO-BIKE ***

5.2.1 PAIRING 3 XBi2 UNITS TOGETHER - RIDER:1 (MAIN) RIDER:

2 (SATELLITE 1) RIDER:3 (SATELLITE 2)

1. Turn on Main, Satellite (1) and Satellite (2) units on

2. Get the Main unit. Press & hold the Power button and the Mode button

simultaneously

3. LED will start to ﬂ ash RED and occasional BLUE after 3 seconds

4. Release both Power button and the Mode button

5. Now get the Satellite (1) unit. Press the Power button and the Mode but-

ton simultaneously for one second *

6. LED will start to ﬂ ash

7. Immediately get the second Satellite (2) unit. Press the Power button

and the Mode button simultaneously for one second *

8. LED will start to ﬂ ash

9. If pairing sequence was done correctly all three XBi2 units will turn

themselves off

First: Satellite (1)

Second: Satellite (2)

Third: Main

10. Pairing is now complete, XBi2 units are now paired and will connect to

each other automatically when units are on and within range of each other

5.2.2 PAIRING 2 XBi2 UNITS TOGETHER - RIDER:1 (MAIN) RIDER:2

(SATELLITE)

*** MAIN UNIT MUST BE ON AT ALL TIMES TO COMMUNICATE BIKE-TO-BIKE ***

1. Turn both Main and Satellite unit on

2. Get the Main unit. Press & hold the Power button and the Mode button

simultaneously

3. LED will start to ﬂ ash RED and occasional BLUE after 3 seconds

4. Release both Power button and the Mode button

5. Immediately get the Satellite unit. Press the Power button and the Mode

button simultaneously for one second *

6. LED will start to ﬂ ash then unit turns itself off quickly

7. The main unit will turn itself off 8-10 second after the Satellite unit is off

8. Pairing is now complete

9. XBi2 units are now paired and will connect to each other automatically

when both units are on and within range of each other

* Do not delay the process or the XBi2 units will go on timeout mode and

need to start the pairing process over

xbi2_maual.indd 11 4/15/09 3:40:50 PM

Indice

Altri manuali Chatter Box Sistema di interfono

Chatter Box

Chatter Box DUO Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente

Chatter Box xbi2 Manuale utente

Manuali Sistema di interfono popolari di altre marche