Chauvet Professional Strike Array 2 Manuale utente

Model ID: STRIKEARRAY2

User Manual

Strike Array 2 User Manual Rev. 4

Edition Notes

The Strike Array 2 User Manual includes a description, safety precautions, installation, programming,

operation and maintenance instructions for the Strike Array 2 as of the release date of this edition.

Trademarks

Chauvet, the Chauvet logo and Strike are registered trademarks or trademarks of Chauvet & Sons, LLC (d/

b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product

names and logos referred to herein may be trademarks of their respective companies.

The works of authorship contained in this manual, including, but not limited to, all designs, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com.

Document Revision

This is revision 4 of the Strike Array 2 User Manual. Go to www.chauvetprofessional.com for the latest

version.

Strike Array 2 User Manual Rev. 4

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Text Conventions .......................................................................................... 1

Symbols ........................................................................................................ 1

Safety Notes.................................................................................................. 2

FCC Statement of Compliance ..................................................................... 3

Expected LED Lifespan................................................................................. 3

2. Introduction ................................................................................ 4

Description .................................................................................................... 4

Features........................................................................................................ 4

Product Overview.......................................................................................... 4

Product Dimensions ...................................................................................... 5

3. Setup ........................................................................................... 6

AC Power...................................................................................................... 6

AC Plug .............................................................................................................. 6

Power Linking..................................................................................................... 6

Remote Device Management........................................................................ 6

USB Software Update ................................................................................... 7

Force Upload................................................................................................. 7

Mounting ....................................................................................................... 8

Orientation.......................................................................................................... 8

Rigging ............................................................................................................... 8

Procedure........................................................................................................... 8

Product Mounting Diagram ...................................................................................... 8

Multi-Product Mounting ...................................................................................... 9

Multi-Product Mounting Diagram ............................................................................. 9

Mounting Products Attached in Series .................................................................... 10

Vertical Mounting Stability ....................................................................................... 11

4. Operation .................................................................................... 12

Control Panel Description ............................................................................. 12

Control Options ............................................................................................. 12

Programming................................................................................................. 12

Passcode ...................................................................................................... 12

Menu Map ..................................................................................................... 12

DMX Configuration........................................................................................ 13

Control Personalities .......................................................................................... 13

Starting Address................................................................................................. 13

Control Channel Assignments and Values.................................................... 14

........................................................................................................................... 14

Configuration (Standalone) ........................................................................... 15

Static Color......................................................................................................... 15

Automatic Program ............................................................................................ 15

Configuration (Settings) ................................................................................ 15

Red Shift ............................................................................................................ 15

Master Slave ...................................................................................................... 15

Dimmer Mode..................................................................................................... 15

Pulse Width Modulation ..................................................................................... 15

Display Back Light.............................................................................................. 15

Key Lock ............................................................................................................ 15

Table of Contents

Strike Array 2 User Manual Rev. 4

Product Information............................................................................................ 15

Temperature....................................................................................................... 15

Factory Reset..................................................................................................... 15

5. Maintenance................................................................................ 16

Product Maintenance .................................................................................... 16

6. Technical Specifications ........................................................... 17

Warranty & Returns....................................................................................... 18

Strike Array 2 User Manual Rev. 4

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate a claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

•StrikeArray2

• Seetronic Powerkon IP65 power cable

• Omega bracket with mounting hardware

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic

IP rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data

transmission protocol.

Before You Begin

Strike Array 2 User Manual Rev. 4

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

• The luminaire is intended for professional use only.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord

or cord exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or its service

agent or a similar qualified person.

• CAUTION:

• This product’s housing may be hot when operating. Mount this product in a location with adequate

ventilation, at least 20 in (50 cm) from adjacent surfaces.

•

When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure,

allow the product to fully acclimate to the surrounding environment before connecting it to power.

• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding

notification of strobe use.

• ALWAYS:

• Disconnect from power before cleaning the product or replacing the fuse.

• When using an IP65-rated product in an outdoor environment, use IP65- (or higher) rated power

and data cable.

• Replace and secure IP-rated protective covers to all power, data, USB, or other ports when not in

use.

• Replace the fuse with the same type and rating.

• Use a safety cable when mounting this product overhead.

• Connect this product to a grounded and protected circuit.

•DONOT:

• Open this product. It contains no user-serviceable parts.

• Look at the light source when the product is on.

• Leave any flammable material within 20 cm of this product while operating or connected to power.

• Connect this product to a dimmer or rheostat.

• Operate this product if the housing, lenses, or cables appear damaged.

• Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation

is fine.

• Permanently install outdoors in locations with extreme environmental conditions. This includes, but

is not limited to:

• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).

• Locations where normal temperatures exceed the temperature ranges in this manual.

• Locations that are prone to flooding or being buried in snow.

• Other areas where the product will be subject to extreme radiation or caustic substances.

• ONLY use the handles or the hanging/mounting brackets to carry this product.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained, certified technicians. Do not open the housing

or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

If a Chauvet product requires service, contact Chauvet Technical Support.

Strike Array 2 User Manual Rev. 4

Before You Begin

FCC Statement of Compliance

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than

single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is

40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit

the overall intensity.

Introduction

Strike Array 2 User Manual Rev. 4

2. Introduction

Description

The Strike Array 2 is an outdoor-ready audience blinder powered by two 100 W warm white LEDs housed

in independently focusable pods. An emulated “amber shift” warms the color temperature of the light as it

dims to deliver a classic tungsten look. Its variable PWM and high CRI make it ideal for broadcast

applications. Thanks to a custom interlocking system, the Strike Array 2 can be interconnected with

multiple Array units for scalable design configurations without any tools. Omega-Bracket locks are also

installed both on the yoke and the back of the IP65 blinder to give a streamlined truss mounting process.

Features

• Operating modes:

• 1 Ch (1-channel): Dimmer

• 2 Ch (2-channel): White mode LED1, white mode LED2

• 3 Ch (3-channel): Dimmer, red shift, dimmer speed mode

• 4 Ch (4-channel): White mode LED1, white mode LED2, red shift, dimmer speed mode

• 5 Ch (5-channel): Dimmer, red shift, strobe, auto programs, dimmer speed mode

• 8 Ch (8-channel): Dimmer, 16-bit dimmer, red shift, strobe, white mode LED1, white mode

LED2, auto programs, dimmer speed mode

• Intense 2 pod blinder/strobe rated IP65 for all-weather use

• Emulated “red shift” to mimic incandescent fixtures perfectly.

• Individual pan (or tilt, depending on mount orientation) of each head to allow for directional

adjustment of light output.

• Innovative interlocking system to connect multiple Strike Array 2s and Strike Array 4s together.

• Multiple mounting locations with ¼ turn adaptors for creative and convenient rigging options

• 16-bit dimming control for smooth, perfect fades

• Strobe functionality for high-impact effects on the fly

• Easy to use OLED display

• Adjustable Pulse Width Modulation (PWM) and RDM (Remote Device Management) for added

flexibility

Product Overview

Menu buttonsOLED display

Power in/out DMX in/out USB port

Ventilation valve

Strike Array 2 User Manual Rev. 4

Introduction

Product Dimensions

1.65 in

42 mm

0.51 in

13 mm

2.05 in

52 mm

8.89 in

225.8 mm 6.42 in

163 mm

7.61 in

193.3 mm

18.58 in

472 mm

15.09 in

383.3 mm

4.55 in

115.6 mm

Setup

Strike Array 2 User Manual Rev. 4

3. Setup

AC Power

The Strike Array 2 has an auto-ranging power supply and it can work with an input voltage range of 100 to

240 VAC, 50/60 Hz.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

AC Plug

The Strike Array 2 comes with a power input cord terminated with a Seetronic Powerkon A connector on

one end and an Edison plug on the other end (U.S. market). If the cable has no plug or the plug needs to

be changed, use the table below to wire a plug.

Power Linking

It is possible to power link Strike Array 2 products. See the table below for the current draw at each voltage

and frequency:

Never exceed 12 A on a single circuit. Power-linking cables can be purchased separately.

Remote Device Management

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate

bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the

manufacturer as not all DMX controllers have this capability. The Strike Array 2 supports RDM protocol that

allows feedback to make changes to menu map options.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or

fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 50 Hz

Current Draw 1.24 A 1.04 A 0.61 A 0.56 A 0.54 A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Chauvet Professional Attrezzatura di illuminazione

Chauvet Professional

Chauvet Professional Ovation F-265WW Manuale utente

Chauvet Professional

Chauvet Professional Ovation E-190WW Manuale utente

Chauvet Professional

Chauvet Professional WELL Gobo Manuale utente

Chauvet Professional

Chauvet Professional Ovation F-415FC Manuale utente

Chauvet Professional

Chauvet Professional COLORdash Par-H12XIP Manuale utente

Chauvet Professional

Chauvet Professional Ovation E-260CW Manuale utente

Chauvet Professional

Chauvet Professional onAirPanel1IP Manuale utente

Chauvet Professional

Chauvet Professional Maverick Storm 2 BeamWash Manuale utente

Chauvet Professional

Chauvet Professional Maverick MK3 Profile Manuale utente

Chauvet Professional

Chauvet Professional COLORSTRIKEM Manuale utente

Chauvet Professional

Chauvet Professional Ovation E-190WW Manuale utente

Chauvet Professional

Chauvet Professional Ovation F-265WW Manuale utente

Chauvet Professional

Chauvet Professional STRIKE ARRAY 4 Manuale utente

Chauvet Professional

Chauvet Professional Well Panel Manuale utente

Chauvet Professional

Chauvet Professional OVATION-F-915-VW Manuale utente

Chauvet Professional

Chauvet Professional REM-RB200CM IP Manuale utente

Chauvet Professional

Chauvet Professional Rogue R3 Beam Manuale utente

Chauvet Professional

Chauvet Professional onAir IP panel min Manuale utente

Chauvet Professional

Chauvet Professional REM-RB100CMIP Manuale utente

Chauvet Professional

Chauvet Professional STRIKE 1 Manuale utente

Chauvet Professional

Chauvet Professional REMRB50CMIPCURVE Manuale utente

Chauvet Professional

Chauvet Professional COLOR Strike M Manuale utente

Chauvet Professional

Chauvet Professional Ovation FD-205WW Manuale utente

Chauvet Professional

Chauvet Professional STRIKE 4 Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente