Checkpoint Evolve F10 Manuale utente

Evolve F10

Installation Manual

Document Version *60

P/N 10034505

F10 Installation Manual Rev.*60 2 of 71

EVOLVE F10 Installation Manual

Released 11/29/2012.

Published by:

Checkpoint Systems Inc.

101 Wolf Drive

Thorofare, NJ 08086

For use with the Checkpoint EVOLVE F10 Systems.

Trademarks

Checkpoint is a registered trademark of Checkpoint Systems, Inc.

Checkpoint, Liberty, Evolve, and VisiPlus are registered trademarks of Checkpoint Systems, Inc.

Other products are © or ® of their respective manufacturers or copyright holders.

Companies, names and data used in examples herein are fictitious unless otherwise noted. No part

of the contents of this book may be reproduced or transmitted in any form or by any means

without the written permission of the publisher.

Because of the changing nature of this product information presented in the F10 Installation

Manual, Checkpoint Systems, Inc. is not liable for any omissions, misstatements, or other errors of

information.

The information presented in this document may not be copied, used or disclosed to others for the

purpose of procurement or manufacturing without the written permission of Checkpoint Systems,

Inc. This guide and the products discussed in this guide are the exclusive property of Checkpoint

Systems Inc. Copyright laws of the United States protect all information and products.

Document Revision Information

Part Number: 10034505

EVOLVE F10 Installation Manual, version 00

Rev

Description

Date

Authors

Preliminary Release

11/29/2012

Ron Decker, Joseph Galanti,

Greg Plizak

F10 Installation Manual Rev. *60 3 of 71

Statements

•The device(s) may only be used for the intended purpose designed by for the manufacturer.

•Unauthorized changes and the use of spare parts and additional devices which have not been sold or

recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures

shall exclude any liability by the manufacturer.

•The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the

device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the

manual or automatically set parameters for a device or for an incorrect application of a device.

•Repairs may only be executed by the manufacturer.

•Installation, operation, and maintenance procedures should only be carried out by qualified personnel.

•Use of the device and its installation must be in accordance with national legal requirements and local

electrical codes.

•When working on devices the valid safety regulations must be observed.

•Before touching the device, the power supply must always be interrupted. Make sure that the device is

without voltage by measuring. The fading of an operation control (LED) is not an indicator for an

interrupted power supply or the device being out of voltage!

•The installer or licensed electrician must follow all NEC and local codes.

•All wires routed in the floor per article 725 must be Class 2 and be UL Listed. UL Recognized AWM may

be employed, provided it is enclosed in Conduit or ENT.

•The F10 is not to be installed in Wet Locations. For indoor use only.

•Checkpoint is not responsible for or warrant any repairs or rework to the flooring during or after the

installation of the antenna.

Guide Conventions

Document conventions are described below:

This is a Warning icon. When it appears, it indicates a potentially hazardous situation, which if not

avoided, could result in death or serious injury.

Caution: This is a Caution icon. When it appears, it indicates a potentially hazardous situation which

if not avoided, could result in property damage or malfunction of equipment.

Note: This is a Tip icon. When it appears, the corresponding text indicates a helpful note or tip when

using the feature.

For all measurements:

•To meet both CE and FCC requirements, all measurements will be listed in the following format:

Metric [Imperial], for example: 46cm [18in] or 0.9m [3ft].

•Where non-S.I. units are applicable, such as 6’ x 4’ or 3/16”, the format in this case is Unit

(metric).

Where on-screen computer instructions are given:

Button Name -This describes a button or an on-screen command or drop-down selection.

For example, the <DONE> button is represented in this document as Done.

Key Name -This describes a keystroke on a keyboard. For example, Ctrl represents the control key.

F10 Installation Manual Rev. *60 4 of 71

Important Information to our Users in North America

FCC Regulatory Compliance Statement

Checkpoint Systems, Inc., offers Electronic Article Surveillance (EAS) or Radio Frequency

Identification Products that have been FCC certified or verified to 47 CFR Part 15 Subparts B/C.

Appropriately, one of the following labels will apply to the approval:

NOTE: This equipment has been tested and found to comply with the limits for a class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

- OR -

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) including this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation, which may include intermittent decreases in detection and/or

intermittent increases in alarm activity.

Industry Canada Regulatory Compliance Statement

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce

potential radio interference to other users, the antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communication.

This radio transmitter (IC: 3356B-F20) has been approved by Industry Canada to operate with

the antenna types listed below with the maximum permissible gain and required antenna

impedance for each antenna type indicated. Antenna types not included in this list, having a gain

greater than the maximum gain indicated for that type, are strictly prohibited for use with this

device.

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

To reduce potential radio interference to other users, the antenna type and its gain should be so

chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted

for successful communication.

F10 Installation Manual Rev. *60 5 of 71

Industrie Canada

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner

avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par

Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des

autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope

rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une

communication satisfaisante.

Le présent émetteur radio (IC: 3356B-F20) a été approuvé par Industrie Canada pour fonctionner

avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance

requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le

gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de

l'émetteur.

Le fonctionnement de l’ appareil est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas perturber les communications radio, et

(2) cet appareil doit supporter toute perturbation, y compris les perturbations qui pourraient

provoquer son dysfonctionnement.

Pour réduire le risque d'interférence aux autres utilisateurs, le type d'antenne et son gain

doivent être choisis de façon que la puissance isotrope rayonnée équivalente (PIRE) ne

dépasse pas celle nécessaire pour une communication réussie.

Equipment Safety Compliance Statement

Checkpoint Systems’ EAS or Radio Frequency Identification products have been designed to be

safe during normal use and, where applicable, certain components of the system or accessory

sub-assemblies have been certified, listed or recognized in accordance with one or more of the

following Safety standards: UL 1012, UL 1037, UL 1310, UL 60950-1, CSA C22.2 No. 205,

CSA C22.2 No. 220, CSA C22.2 No. 223, CSA C22.2 No. 60950-1. Additional approvals may

be pending.

WARNING: Changes or modifications to Checkpoint’s EAS or Radio Frequency Identification

(RFID) equipment not expressly approved by the party responsible for assuring compliance

could void the user’s authority to operate the equipment in a safe or otherwise regulatory

compliant manner.

F10 Installation Manual Rev. *60 6 of 71

Important Information to our Users in Europe

CE Regulatory Compliance Statement

Where applicable, Checkpoint Systems, Inc. offers certain Electronic Article Surveillance (EAS)

products that have CE Declarations of Conformity according to R&TTE Directive 99/5/EC,

EMC Directive 2004/108/EC, and Low Voltage Directive 2006/95/EC.

System Electromagnetic Compatibility (EMC) has been tested and notified through Spectrum

Management Authorities if necessary, using accredited laboratories, whereby, conformity is

declared by voluntarily accepted European Telecommunications Standards Institute (ETSI)

standards EN 301489-1 and EN 300330-2.

NOTE: Certain Electronic Article Surveillance (EAS) equipment have been tested and found to

conform with the CE emission and immunity requirement in Europe. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Under unusual

circumstances, interference from external sources may degrade the system performance, which

may include intermittent decreases in detection and/or intermittent increases in alarm activity.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment experiences frequent interference from external sources or does cause harmful

interference to radio communications reception, which can be determined by turning the

equipment off and on, please contact a Checkpoint Systems representative for further assistance.

Equipment Safety Compliance Statement

Checkpoint Systems Electronic Article Surveillance products have been designed to be safe

during normal use and, where applicable, certain components of the system or accessory sub-

assemblies have been declared safe according to the European Low Voltage Directive (LVD) by

being certified, listed, or recognized in accordance with one or more of the following European

safety standards; EN 60950-1, EN 50364, EN 60742.

WARNING: Changes or modifications to Electronic Article Surveillance equipment not

expressly approved by the party responsible for assuring compliance could void the user’s

authority to operate the equipment in a safe or otherwise regulatory compliant manner additional

approvals may be pending.

F10 Installation Manual Rev.*60 7 of 71

Table of Contents

STATEMENTS .............................................................................................................................................................3

GUIDE CONVENTIONS................................................................................................................................................3

CHAPTER 1: INTRODUCTION...................................................................................................................................9

BACKGROUND ...........................................................................................................................................................9

Overview ............................................................................................................................................................10

F10 SYSTEM HARDWARE.........................................................................................................................................10

SYSTEM DIAGRAMS.................................................................................................................................................11

GROUPING MULTIPLE ANTENNAS............................................................................................................................12

2X 1METER CONFIGURATION.................................................................................................................................12

CHAPTER 2:SITE SURVEY.......................................................................................................................................13

Overview ............................................................................................................................................................13

ANTENNA DISTANCE FROM INTERFERING ELEMENTS..............................................................................................13

SYSTEM PERFORMANCE CONSIDERATIONS..............................................................................................................14

DETERMINING THE ELECTRONICS LOCATION ..........................................................................................................14

ENVIRONMENTAL CONSIDERATIONS .......................................................................................................................15

SITE SURVEY CONCLUSION .....................................................................................................................................15

CHAPTER 3:PHYSICAL INSTALLATION.............................................................................................................16

Chapter Outline..................................................................................................................................................16

REQUIREMENTS .......................................................................................................................................................16

Tools...................................................................................................................................................................16

Parts...................................................................................................................................................................17

INSTALLATION OUTLINE..........................................................................................................................................17

Antenna Installation...........................................................................................................................................17

F10, 1METER AND 2METER FLOOR CUTS ..............................................................................................................18

Floor Cut Depth.................................................................................................................................................19

COMMON WIDER FLOOR CUTS ................................................................................................................................20

MOUNTING THE ELECTRONICS ENCLOSURE ............................................................................................................21

MOUNTING THE POWER SUPPLY..............................................................................................................................23

GS-599ES(R) Installation...................................................................................................................................23

GS-599MC-KIT(R) Installation .........................................................................................................................23

FINISHING INSTALLATION........................................................................................................................................24

CHAPTER 4:WIRING.................................................................................................................................................25

Overview ............................................................................................................................................................25

ANTENNA WIRING...................................................................................................................................................26

Wiring Components............................................................................................................................................26

Placement...........................................................................................................................................................26

Wiring the F10, 2 Meter System.........................................................................................................................27

Wiring the F10, 1 Meter System.........................................................................................................................31

Adjusting Jumper Settings..................................................................................................................................32

WIRING THE 2X 1METER SYSTEM..........................................................................................................................32

OVERVIEW...............................................................................................................................................................33

Coax Cable / A1116 Wiring...............................................................................................................................33

Remote Voice Alarm...........................................................................................................................................34

Alarm Post Wiring .............................................................................................................................................35

24VDC Power Supply Wiring ............................................................................................................................36

WIRING BETWEEN F10 SYSTEMS FOR SYNC............................................................................................................37

Sync Cable and Power Supply Wiring ...............................................................................................................37

WIRING PERIPHERALS..............................................................................................................................................38

F10 Installation Manual Rev. *60 8 of 71

CHAPTER 5:F10 SYSTEM CONFIGURATION VIA DMS....................................................................................39

Overview ............................................................................................................................................................39

SYSTEM SETUP USING DMS....................................................................................................................................39

Single-Electronic System Setup..........................................................................................................................39

Multi-Electronic Systems (Sync Configuration).................................................................................................44

APPLICATION-BASED DETECTION MODES...............................................................................................................44

Standard: 8.2 and Library: 9.5

...............................................................................................................................45

Corral: 8.2, 9.0

.......................................................................................................................................................45

Reverse Corral: 8.2, 9.0

...........................................................................................................................................45

Apparel: 8.2, 9.2

.....................................................................................................................................................45

Pharma: 8.2, 7.2

.....................................................................................................................................................45

RazorKeeper: 8.2, 7.2

..............................................................................................................................................45

Immunity: 8.2

.........................................................................................................................................................45

Japan I: 8.2=9.5 and Japan II: 8.2, 9.5

...................................................................................................................46

ALARM SEVERITY....................................................................................................................................................46

CONFIGURING SAM (SMART ALARM MANAGEMENT) ............................................................................................47

Navigating to the SAM Screen ...........................................................................................................................47

Changing the Patterns .......................................................................................................................................50

Changing the Matrix..........................................................................................................................................52

PDATING THE

YSTEM

..............................................................................................................................................52

CHAPTER 6: TUNING PROCEDURES (1M AND 2M VARY)..............................................................................53

Overview ............................................................................................................................................................53

TR4215 FEATURES..................................................................................................................................................53

BASIC TUNING METHODS USING DMS....................................................................................................................53

NOISE SOURCES.......................................................................................................................................................54

ANALOG VIEW.........................................................................................................................................................55

Typical Tuning Procedure..................................................................................................................................55

EVALUATE JUMPER POSITIONS ................................................................................................................................56

System Specific Procedures................................................................................................................................56

For 2 Meter System............................................................................................................................................56

For single 1 Meter or 2 x 1 Meter System..........................................................................................................56

CONFIGURING THE SYSTEM FOR ASYNCHRONOUS NOISE........................................................................................57

RESONANCE SOURCES.............................................................................................................................................59

Remedying Resonances......................................................................................................................................59

Jammer Indication .............................................................................................................................................61

DATA RETRIEVAL....................................................................................................................................................61

Event History .....................................................................................................................................................61

Snap Shot feature...............................................................................................................................................61

APPENDIX A: POWER SUPPLY................................................................................................................................62

POWER SUPPLY DETAILS .........................................................................................................................................62

Power Supply Used in United States, Canada and Europe................................................................................62

Power Supply Used in Australia ........................................................................................................................64

APPENDIX B: PARTS LISTS ......................................................................................................................................65

F10 PARTS LIST.......................................................................................................................................................65

APPENDIX C: INTERACTIONS.................................................................................................................................66

F10 SYSTEM –PROXIMITY TO DEACTIVATION UNITS..............................................................................................66

F10 SYSTEM –PROXIMITY TO OTHER SYSTEMS ......................................................................................................67

APPENDIX D: DETECTION PERFORMANCE .......................................................................................................68

F10, 2METER SYSTEM ............................................................................................................................................68

F10, 1METER SYSTEM ............................................................................................................................................70

F10 Installation Manual Rev.*60 9 of 71

CHAPTER

INTRODUCTION

Background

Many retailers are now requiring invisible EAS Systems. The F10 system is Checkpoint’s latest

invisible EAS offering. This product features a unique shielded antenna design based on the

previously released, S10 product. This technology minimizes the impact of in floor noise sources

that plagued previous floor systems.

Offering better immunity to noise, Next Gen Liberty (NGL) TR4215 Electronics are utilized for

F10 systems. It is anticipated that the next generation of Evolve electronics will eventually

replace the NGL electronics for the F10 system; thus the name “Evolve F10.” At this time, this

installation manual reflects installation and tuning for the NGL electronics only.

This manual instructs in the planning, installation and configuration of the EVOLVE F10 System.

Figure 1.1F10 System Introduction (F10, 2 meter installation shown)

F10 Installation Manual Rev. *60 10 of 71

Overview

This chapter explains F10 system hardware. This general information is useful for initial planning

and training purposes.

1. Hardware: Shows hardware components including the antenna assembly and electronics.

2. System Diagrams: Shows overall design and component layout of the F10 system.

F10 System Hardware

The F10 system is designed to be installed in the floor and provide an invisible EAS system. The

basic design is a 1 meter antenna assembly. Each antenna features multiple shielded coils. A

single assembly or two (2) units can be connected to a single Impedance Matching Board.

Figure 1.2F10 Hardware

Figure 1.3 TR4215 Electronics Enclosure

The F10 system consists of a transceiver-based system using pulse/listen technology, allowing

them to work in a single antenna configuration. In the same way that the NLG FX2012 system

works, F10 antennas connect to a remote electronics enclosure via a coax cable.

The antenna is wired directly to an Impedance Matching Board, another component that is

installed in the floor (i.e. buried along with the antenna). The Impedance Matching Board

provides the link between the antenna wiring and coax cable that connects to the remotely

located electronics enclosure. Typical EAS peripherals are able to be incorporated.

The electronics enclosure is designed to ensure proper ventilation in a non-condensing 0-40O C

environment. The wiring for the electronics system is a low-voltage, limited-energy system

(operating at 24VDC or less). All wiring must conform to applicable wiring codes.

The F10, 2 meter kit includes one (1) Impedance Matching Board for connecting the two (2)

antennas to a single Electronics Enclosure via two (2) coax cables routed through a single piece of

conduit. The power supply unit (not shown) is the standard +24VDC unit (refer to Appendix A:

Power Supply).

Indice

Altri manuali Checkpoint Antenna

Checkpoint

Checkpoint Classic IP Street Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente